/* SPDX-License-Identifier: GPL-2.0-only */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "chip.h" static void lock_pam0123(void) { const struct device *dev; if (get_lockdown_config() != CHIPSET_LOCKDOWN_COREBOOT) return; dev = pcidev_path_on_bus(get_stack_busno(1), PCI_DEVFN(SAD_ALL_DEV, SAD_ALL_FUNC)); pci_or_config32(dev, SAD_ALL_PAM0123_CSR, PAM_LOCK); } DECLARE_SPIN_LOCK(msr_ppin_lock); static void lock_msr_ppin_ctl(void *unused) { msr_t msr; msr = rdmsr(MSR_PLATFORM_INFO); if ((msr.lo & MSR_PPIN_CAP) == 0) return; spin_lock(&msr_ppin_lock); msr = rdmsr(MSR_PPIN_CTL); if (msr.lo & MSR_PPIN_CTL_LOCK) { spin_unlock(&msr_ppin_lock); return; } /* Clear enable and lock it */ msr.lo &= ~MSR_PPIN_CTL_ENABLE; msr.lo |= MSR_PPIN_CTL_LOCK; wrmsr(MSR_PPIN_CTL, msr); spin_unlock(&msr_ppin_lock); } static void soc_finalize(void *unused) { printk(BIOS_DEBUG, "Finalizing chipset.\n"); /* * Disable ACPI PM timer based on Kconfig * * Disabling ACPI PM timer is necessary for XTAL OSC shutdown. * Disabling ACPI PM timer also switches off TCO. * * Note: In contrast to other platforms supporting PM timer emulation, * disabling the PM timer must be done *after* FSP has run on Xeon-SP, * because FSP makes use of the PM timer. */ if (!CONFIG(USE_PM_ACPI_TIMER)) setbits8(pmc_mmio_regs() + PCH_PWRM_ACPI_TMR_CTL, ACPI_TIM_DIS); apm_control(APM_CNT_FINALIZE); lock_pam0123(); if (CONFIG_MAX_SOCKET > 1) { /* This MSR is package scope but run for all cpus for code simplicity */ if (mp_run_on_all_cpus(&lock_msr_ppin_ctl, NULL) != CB_SUCCESS) printk(BIOS_ERR, "Lock PPIN CTL MSR failed\n"); } else { lock_msr_ppin_ctl(NULL); } post_code(POST_OS_BOOT); } static void bios_done_finalize(void *unused) { if (!CONFIG(SOC_INTEL_HAS_BIOS_DONE_MSR)) return; printk(BIOS_DEBUG, "Setting BIOS_DONE\n"); /* bios_done_msr() only defined for some Xeon-SP, such as SPR-SP */ if (mp_run_on_all_cpus(&bios_done_msr, NULL) != CB_SUCCESS) printk(BIOS_ERR, "Fail to set BIOS_DONE MSR\n"); } BOOT_STATE_INIT_ENTRY(BS_PAYLOAD_LOAD, BS_ON_ENTRY, soc_finalize, NULL); /* FSP programs certain registers via Notify phase ReadyToBoot that can only be programmed before BIOS_DONE MSR is set, so coreboot sets BIOS_DONE as late as possible. */ BOOT_STATE_INIT_ENTRY(BS_PAYLOAD_BOOT, BS_ON_ENTRY, bios_done_finalize, NULL);