/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2014 Google Inc.
 * Copyright (C) 2015 Intel Corporation.
 * Copyright (C) 2016 Intel Corporation.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */
#include <arch/io.h>
#include <chip.h>
#include <device/device.h>
#include <device/pci_def.h>
#include <soc/bootblock.h>
#include <soc/iomap.h>
#include <soc/lpc.h>
#include <soc/p2sb.h>
#include <soc/pch.h>
#include <soc/pci_devs.h>
#include <soc/pcr.h>
#include <soc/pm.h>
#include <soc/pmc.h>
#include <soc/smbus.h>

/* Max PXRC registers in ITSS*/
#define MAX_PXRC_CONFIG		0x08

/*
 * Enable Prefetching and Caching.
 */
static void enable_spi_prefetch(void)
{
	u8 reg8 = pci_read_config8(PCH_DEV_SPI, 0xdc);
	reg8 &= ~(3 << 2);
	reg8 |= (2 << 2); /* Prefetching and Caching Enabled */
	pci_write_config8(PCH_DEV_SPI, 0xdc, reg8);
}

static void enable_spibar(void)
{
	device_t dev = PCH_DEV_SPI;
	u8 pcireg;

	/* Assign Resources to SPI Controller */
	/* Clear BIT 1-2 SPI Command Register */
	pcireg = pci_read_config8(dev, PCI_COMMAND);
	pcireg &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
	pci_write_config8(dev, PCI_COMMAND, pcireg);

	/* Program Temporary BAR for SPI */
	pci_write_config32(dev, PCI_BASE_ADDRESS_0,
		SPI_BASE_ADDRESS | PCI_BASE_ADDRESS_SPACE_MEMORY);

	/* Enable Bus Master and MMIO Space */
	pcireg = pci_read_config8(dev, PCI_COMMAND);
	pcireg |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
	pci_write_config8(dev, PCI_COMMAND, pcireg);
}

static void enable_p2sbbar(void)
{
	device_t dev = PCH_DEV_P2SB;

	/* Enable PCR Base address in PCH */
	pci_write_config32(dev, PCI_BASE_ADDRESS_0, PCH_PCR_BASE_ADDRESS);

	/* Enable P2SB MSE */
	pci_write_config8(dev, PCI_COMMAND,
			  PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
	/*
	 * Enable decoding for HPET memory address range.
	 * HPTC_OFFSET(0x60) bit 7, when set the P2SB will decode
	 * the High Performance Timer memory address range
	 * selected by bits 1:0
	 */
	pci_write_config8(dev, HPTC_OFFSET, HPTC_ADDR_ENABLE_BIT);
}

void bootblock_pch_early_init(void)
{
	enable_spibar();
	enable_spi_prefetch();
	enable_p2sbbar();
}

static void pch_enable_lpc(void)
{
	/* Lookup device tree in romstage */
	const struct device *dev;
	const config_t *config;

	dev = dev_find_slot(0, PCI_DEVFN(PCH_DEV_SLOT_LPC, 0));
	if (!dev || !dev->chip_info)
		return;
	config = dev->chip_info;

	/* Set in PCI generic decode range registers */
	pci_write_config32(PCH_DEV_LPC, LPC_GEN1_DEC, config->gen1_dec);
	pci_write_config32(PCH_DEV_LPC, LPC_GEN2_DEC, config->gen2_dec);
	pci_write_config32(PCH_DEV_LPC, LPC_GEN3_DEC, config->gen3_dec);
	pci_write_config32(PCH_DEV_LPC, LPC_GEN4_DEC, config->gen4_dec);

	/* Mirror these same settings in DMI PCR */
	pcr_write32(PID_DMI, R_PCH_PCR_DMI_LPCLGIR1, config->gen1_dec);
	pcr_write32(PID_DMI, R_PCH_PCR_DMI_LPCLGIR2, config->gen2_dec);
	pcr_write32(PID_DMI, R_PCH_PCR_DMI_LPCLGIR3, config->gen3_dec);
	pcr_write32(PID_DMI, R_PCH_PCR_DMI_LPCLGIR4, config->gen4_dec);
}

static void pch_interrupt_init(void)
{
	const struct device *dev;
	const config_t *config;
	u8 index = 0;
	u8 pch_interrupt_routing[MAX_PXRC_CONFIG];

	dev = dev_find_slot(0, PCI_DEVFN(PCH_DEV_SLOT_LPC, 0));
	if (!dev || !dev->chip_info)
		return;
	config = dev->chip_info;

	pch_interrupt_routing[0] = config->pirqa_routing;
	pch_interrupt_routing[1] = config->pirqb_routing;
	pch_interrupt_routing[2] = config->pirqc_routing;
	pch_interrupt_routing[3] = config->pirqd_routing;
	pch_interrupt_routing[4] = config->pirqe_routing;
	pch_interrupt_routing[5] = config->pirqf_routing;
	pch_interrupt_routing[6] = config->pirqg_routing;
	pch_interrupt_routing[7] = config->pirqh_routing;

	for (index = 0; index < MAX_PXRC_CONFIG; index++) {
		if (pch_interrupt_routing[index] < 16 &&
			pch_interrupt_routing[index] > 2 &&
			pch_interrupt_routing[index] != 8 &&
			pch_interrupt_routing[index] != 13) {
			pcr_write8(PID_ITSS,
					(R_PCH_PCR_ITSS_PIRQA_ROUT + index),
					pch_interrupt_routing[index]);
		}
	}
}

static void soc_config_acpibase(void)
{
	uint32_t reg32;

	/* Disable ABASE in PMC Device first before changing Base Address */
	reg32 = pci_read_config32(PCH_DEV_PMC, ACTL);
	pci_write_config32(PCH_DEV_PMC, ACTL, reg32 & ~ACPI_EN);

	/* Program ACPI Base */
	pci_write_config32(PCH_DEV_PMC, ABASE, ACPI_BASE_ADDRESS);

	/* Enable ACPI in PMC */
	pci_write_config32(PCH_DEV_PMC, ACTL, reg32 | ACPI_EN);

	/*
	 * Program "ACPI Base Address" PCR[DMI] + 27B4h[23:18, 15:2, 0]
	 * to [0x3F, PMC PCI Offset 40h bit[15:2], 1]
	 */
	reg32 = ((0x3f << 18) | ACPI_BASE_ADDRESS | 1);
	pcr_write32(PID_DMI, R_PCH_PCR_DMI_ACPIBA, reg32);
	pcr_write32(PID_DMI, R_PCH_PCR_DMI_ACPIBDID, 0x23A0);
}

static void soc_config_pwrmbase(void)
{
	uint32_t reg32;

	/* Disable PWRMBASE in PMC Device first before changing Base address */
	reg32 = pci_read_config32(PCH_DEV_PMC, ACTL);
	pci_write_config32(PCH_DEV_PMC, ACTL, reg32 & ~PWRM_EN);

	/* Program PWRM Base */
	pci_write_config32(PCH_DEV_PMC, PWRMBASE, PCH_PWRM_BASE_ADDRESS);

	/* Enable PWRM in PMC */
	pci_write_config32(PCH_DEV_PMC, ACTL, reg32 | PWRM_EN);

	/*
	 * Program "PM Base Address Memory Range Base" PCR[DMI] + 27ACh[15:0]
	 * to the same value programmed in PMC PCI Offset 48h bit[31:16],
	 * this has an implication of making sure the PWRMBASE to be
	 * 64KB aligned.
	 *
	 * Program "PM Base Address Memory Range Limit" PCR[DMI] + 27ACh[31:16]
	 * to the value programmed in PMC PCI Offset 48h bit[31:16], this has an
	 * implication of making sure the memory allocated to PWRMBASE to be
	 * 64KB in size.
	 */
	pcr_write32(PID_DMI, R_PCH_PCR_DMI_PMBASEA,
		((PCH_PWRM_BASE_ADDRESS & 0xFFFF0000) |
		 (PCH_PWRM_BASE_ADDRESS >> 16)));
	pcr_write32(PID_DMI, R_PCH_PCR_DMI_PMBASEC, 0x800023A0);
}

static void soc_config_tco(void)
{
	uint32_t reg32 = 0;
	uint16_t tcobase;
	uint16_t tcocnt;

	/* Disable TCO in SMBUS Device first before changing Base Address */
	reg32 = pci_read_config32(PCH_DEV_SMBUS, TCOCTL);
	reg32 &= ~SMBUS_TCO_EN;
	pci_write_config32(PCH_DEV_SMBUS, TCOCTL, reg32);

	/* Program TCO Base */
	pci_write_config32(PCH_DEV_SMBUS, TCOBASE, TCO_BASE_ADDDRESS);

	/* Enable TCO in SMBUS */
	pci_write_config32(PCH_DEV_SMBUS, TCOCTL, reg32 | SMBUS_TCO_EN);

	/*
	 * Program "TCO Base Address" PCR[DMI] + 2778h[15:5, 1]
	 * to [SMBUS PCI offset 50h[15:5], 1].
	 */
	pcr_write32(PID_DMI, R_PCH_PCR_DMI_TCOBASE,
		   (TCO_BASE_ADDDRESS | (1 << 1)));

	/* Program TCO timer halt */
	tcobase = pci_read_config16(PCH_DEV_SMBUS, TCOBASE);
	tcobase &= ~0x1f;
	tcocnt = inw(tcobase + TCO1_CNT);
	tcocnt |= TCO_TMR_HLT;
	outw(tcocnt, tcobase + TCO1_CNT);
}

static void soc_config_rtc(void)
{
	/* Enable upper 128 bytes of CMOS */
	pcr_andthenor32(PID_RTC, R_PCH_PCR_RTC_CONF, ~0,
			B_PCH_PCR_RTC_CONF_UCMOS_EN);
}

static void enable_heci(void)
{
	device_t dev = PCH_DEV_CSE;
	u8 pcireg;

	/* Assign Resources to HECI1 */
	/* Clear BIT 1-2 of Command Register */
	pcireg = pci_read_config8(dev, PCI_COMMAND);
	pcireg &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
	pci_write_config8(dev, PCI_COMMAND, pcireg);

	/* Program Temporary BAR for HECI1 */
	pci_write_config32(dev, PCI_BASE_ADDRESS_0, HECI1_BASE_ADDRESS);
	pci_write_config32(dev, PCI_BASE_ADDRESS_1, 0x0);

	/* Enable Bus Master and MMIO Space */
	pcireg = pci_read_config8(dev, PCI_COMMAND);
	pcireg |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
	pci_write_config8(dev, PCI_COMMAND, pcireg);
}

void pch_early_iorange_init(void)
{
	/* Lookup device tree in romstage */
	u16 lpc_en;

	/* IO Decode Range */
	lpc_en = COMA_RANGE | (COMB_RANGE << 4);
	pci_write_config16(PCH_DEV_LPC, LPC_IO_DEC, lpc_en);
	pcr_write16(PID_DMI, R_PCH_PCR_DMI_LPCIOD, lpc_en);

	/* IO Decode Enable */
	lpc_en = CNF1_LPC_EN | COMA_LPC_EN | KBC_LPC_EN | MC_LPC_EN;
	pci_write_config16(PCH_DEV_LPC, LPC_EN, lpc_en);
	pcr_write16(PID_DMI, R_PCH_PCR_DMI_LPCIOE, lpc_en);
}

void pch_early_init(void)
{
	/*
	 * Enabling ABASE for accessing PM1_STS, PM1_EN, PM1_CNT,
	 * GPE0_STS, GPE0_EN registers.
	 */
	soc_config_acpibase();

	/*
	 * Enabling PWRM Base for accessing
	 * Global Reset Cause Register.
	 */
	soc_config_pwrmbase();

	/* Programming TCO_BASE_ADDRESS and TCO Timer Halt */
	soc_config_tco();

	/*
	 * Interrupt Configuration Register Programming
	 * PIRQx to IRQ Programming
	 */
	pch_interrupt_init();

	/* Program generic IO Decode Range */
	pch_enable_lpc();

	/* Program SMBUS_BASE_ADDRESS and Enable it */
	enable_smbus();

	/* Set up GPE configuration */
	pmc_gpe_init();

	soc_config_rtc();

	enable_heci();
}