config SOC_INTEL_SKYLAKE
	bool
	help
	  Intel Skylake support

if SOC_INTEL_SKYLAKE

config CPU_SPECIFIC_OPTIONS
	def_bool y
	select ARCH_BOOTBLOCK_X86_32
	select ARCH_RAMSTAGE_X86_32
	select ARCH_ROMSTAGE_X86_32
	select ARCH_VERSTAGE_X86_32
	select ALWAYS_LOAD_OPROM
	select BACKUP_DEFAULT_SMM_REGION
	select CACHE_MRC_SETTINGS
	select CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM
	select CACHE_ROM
	select CAR_MIGRATION
	select COLLECT_TIMESTAMPS
	select CPU_INTEL_FIRMWARE_INTERFACE_TABLE
	select CPU_MICROCODE_IN_CBFS
	select HAS_PRECBMEM_TIMESTAMP_REGION
	select HAVE_HARD_RESET
	select HAVE_MONOTONIC_TIMER
	select HAVE_SMI_HANDLER
	select HAVE_UART_MEMORY_MAPPED
	select IOAPIC
	select MMCONF_SUPPORT
	select MMCONF_SUPPORT_DEFAULT
	select PARALLEL_MP
	select PCIEXP_ASPM
	select PCIEXP_COMMON_CLOCK
	select PCIEXP_CLK_PM
	select PCIEXP_L1_SUB_STATE
	select PLATFORM_USES_FSP1_1
	select REG_SCRIPT
	select RELOCATABLE_MODULES
	select RELOCATABLE_RAMSTAGE
	select SOC_INTEL_COMMON
	select SOC_INTEL_COMMON_FSP_RAM_INIT
	select SOC_INTEL_COMMON_FSP_ROMSTAGE
	select SOC_INTEL_COMMON_RESET
	select SOC_INTEL_COMMON_STACK
	select SOC_INTEL_COMMON_STAGE_CACHE
	select SMM_MODULES
	select SMM_TSEG
	select SMP
	select SPI_FLASH
	select SSE2
	select SUPPORT_CPU_UCODE_IN_CBFS
	select TSC_CONSTANT_RATE
	select TSC_SYNC_MFENCE
	select UDELAY_TSC
	select USE_GENERIC_FSP_CAR_INC

config BOOTBLOCK_CPU_INIT
	string
	default "soc/intel/skylake/bootblock/cpu.c"

config BOOTBLOCK_NORTHBRIDGE_INIT
	string
	default "soc/intel/skylake/bootblock/systemagent.c"

config BOOTBLOCK_RESETS
	string
	default "soc/intel/common/reset.c"

config BOOTBLOCK_SOUTHBRIDGE_INIT
	string
	default "soc/intel/skylake/bootblock/pch.c"

config CBFS_SIZE
	hex "Size of CBFS filesystem in ROM"
	default 0x200000
	help
	  The firmware image has to store more than just coreboot, including:
	   - a firmware descriptor
	   - Intel Management Engine firmware
	   - MRC cache information
	  This option allows to limit the size of the CBFS portion in the
	  firmware image.

config CPU_ADDR_BITS
	int
	default 36

config DCACHE_RAM_BASE
	hex "Base address of cache-as-RAM"
	default 0xfef00000

config DCACHE_RAM_SIZE
	hex "Length in bytes of cache-as-RAM"
	default 0x4000
	help
	  The size of the cache-as-ram region required during bootblock
	  and/or romstage.

config HAVE_IFD_BIN
	bool "Use Intel Firmware Descriptor from existing binary"
	default n

config BUILD_WITH_FAKE_IFD
	bool "Build with a fake IFD"
	default y if !HAVE_IFD_BIN
	help
	  If you don't have an Intel Firmware Descriptor (ifd.bin) for your
	  board, you can select this option and coreboot will build without it.
	  Though, the resulting coreboot.rom will not contain all parts required
	  to get coreboot running on your board. You can however write only the
	  BIOS section to your board's flash ROM and keep the other sections
	  untouched. Unfortunately the current version of flashrom doesn't
	  support this yet. But there is a patch pending [1].

	  WARNING: Never write a complete coreboot.rom to your flash ROM if it
		   was built with a fake IFD. It just won't work.

	  [1] http://www.flashrom.org/pipermail/flashrom/2013-June/011083.html

config HAVE_ME_BIN
	bool "Add Intel Management Engine firmware"
	default y
	help
	  The Intel processor in the selected system requires a special firmware
	  for an integrated controller called Management Engine (ME). The ME
	  firmware might be provided in coreboot's 3rdparty/blobs repository. If
	  not and if you don't have the firmware elsewhere, you can still
	  build coreboot without it. In this case however, you'll have to make
	  sure that you don't overwrite your ME firmware on your flash ROM.

config HEAP_SIZE
	hex
	default 0x80000

config IED_REGION_SIZE
	hex
	default 0x400000

config IFD_BIN_PATH
	string "Path to intel firmware descriptor"
	depends on !BUILD_WITH_FAKE_IFD
	default "3rdparty/blobs/mainboard/$(MAINBOARDDIR)/descriptor.bin"

config IFD_BIOS_SECTION
	depends on BUILD_WITH_FAKE_IFD
	string
	default ""

config IFD_ME_SECTION
	depends on BUILD_WITH_FAKE_IFD
	string
	default ""

config IFD_PLATFORM_SECTION
	depends on BUILD_WITH_FAKE_IFD
	string
	default ""

config ME_BIN_PATH
	string "Path to management engine firmware"
	depends on HAVE_ME_BIN
	default "3rdparty/blobs/mainboard/$(MAINBOARDDIR)/me.bin"

config MMCONF_BASE_ADDRESS
	hex "MMIO Base Address"
	default 0xe0000000

config MONOTONIC_TIMER_MSR
	def_bool y
	select HAVE_MONOTONIC_TIMER
	help
	  Provide a monotonic timer using the 24MHz MSR counter.

config PRE_GRAPHICS_DELAY
	int "Graphics initialization delay in ms"
	default 0
	help
	  On some systems, coreboot boots so fast that connected monitors
	  (mostly TVs) won't be able to wake up fast enough to talk to the
	  VBIOS. On those systems we need to wait for a bit before executing
	  the VBIOS.

config SERIAL_CPU_INIT
	bool
	default n

config SERIRQ_CONTINUOUS_MODE
	bool
	default y
	help
	  If you set this option to y, the serial IRQ machine will be
	  operated in continuous mode.

config SMM_RESERVED_SIZE
	hex
	default 0x200000

config SMM_TSEG_SIZE
	hex
	default 0x800000

config TTYS0_BASE
	hex
	default 0xfe034000

config VGA_BIOS_ID
	string
	default "8086,0406"

endif