config SOC_INTEL_SKYLAKE bool help Intel Skylake support if SOC_INTEL_SKYLAKE config CPU_SPECIFIC_OPTIONS def_bool y select ARCH_BOOTBLOCK_X86_32 select ARCH_RAMSTAGE_X86_32 select ARCH_ROMSTAGE_X86_32 select ARCH_VERSTAGE_X86_32 select BACKUP_DEFAULT_SMM_REGION select CACHE_MRC_SETTINGS select CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM if RELOCATABLE_RAMSTAGE select CACHE_ROM select CAR_MIGRATION select COLLECT_TIMESTAMPS select CPU_INTEL_FIRMWARE_INTERFACE_TABLE select CPU_MICROCODE_IN_CBFS select GENERIC_GPIO_LIB select HAS_PRECBMEM_TIMESTAMP_REGION select HAVE_HARD_RESET select HAVE_MONOTONIC_TIMER select HAVE_SMI_HANDLER select IOAPIC select MMCONF_SUPPORT select MMCONF_SUPPORT_DEFAULT select PARALLEL_MP select PCIEXP_ASPM select PCIEXP_COMMON_CLOCK select PCIEXP_CLK_PM select PCIEXP_L1_SUB_STATE select PLATFORM_USES_FSP1_1 select REG_SCRIPT select RELOCATABLE_MODULES select RELOCATABLE_RAMSTAGE select SOC_INTEL_COMMON select SOC_INTEL_COMMON_ACPI_WAKE_SOURCE select SOC_INTEL_COMMON_FSP_RAM_INIT select SOC_INTEL_COMMON_FSP_ROMSTAGE select SOC_INTEL_COMMON_RESET select SOC_INTEL_COMMON_STACK select SOC_INTEL_COMMON_STAGE_CACHE select SMM_MODULES select SMM_TSEG select SMP select SPI_FLASH select SSE2 select SUPPORT_CPU_UCODE_IN_CBFS select TSC_CONSTANT_RATE select TSC_SYNC_MFENCE select UDELAY_TSC select USE_GENERIC_FSP_CAR_INC config BOOTBLOCK_CPU_INIT string default "soc/intel/skylake/bootblock/cpu.c" config BOOTBLOCK_NORTHBRIDGE_INIT string default "soc/intel/skylake/bootblock/systemagent.c" config BOOTBLOCK_RESETS string default "soc/intel/common/reset.c" config BOOTBLOCK_SOUTHBRIDGE_INIT string default "soc/intel/skylake/bootblock/pch.c" config CPU_ADDR_BITS int default 36 config DCACHE_RAM_BASE hex "Base address of cache-as-RAM" default 0xfef00000 config DCACHE_RAM_SIZE hex "Length in bytes of cache-as-RAM" default 0x4000 help The size of the cache-as-ram region required during bootblock and/or romstage. config HAVE_IFD_BIN bool "Use Intel Firmware Descriptor from existing binary" default n config BUILD_WITH_FAKE_IFD bool "Build with a fake IFD" default y if !HAVE_IFD_BIN help If you don't have an Intel Firmware Descriptor (ifd.bin) for your board, you can select this option and coreboot will build without it. Though, the resulting coreboot.rom will not contain all parts required to get coreboot running on your board. You can however write only the BIOS section to your board's flash ROM and keep the other sections untouched. Unfortunately the current version of flashrom doesn't support this yet. But there is a patch pending [1]. WARNING: Never write a complete coreboot.rom to your flash ROM if it was built with a fake IFD. It just won't work. [1] http://www.flashrom.org/pipermail/flashrom/2013-June/011083.html config HAVE_ME_BIN bool "Add Intel Management Engine firmware" default y help The Intel processor in the selected system requires a special firmware for an integrated controller called Management Engine (ME). The ME firmware might be provided in coreboot's 3rdparty/blobs repository. If not and if you don't have the firmware elsewhere, you can still build coreboot without it. In this case however, you'll have to make sure that you don't overwrite your ME firmware on your flash ROM. config HEAP_SIZE hex default 0x80000 config IED_REGION_SIZE hex default 0x400000 config IFD_BIN_PATH string "Path to intel firmware descriptor" depends on !BUILD_WITH_FAKE_IFD default "3rdparty/blobs/mainboard/$(MAINBOARDDIR)/descriptor.bin" config IFD_BIOS_SECTION depends on BUILD_WITH_FAKE_IFD string default "" config IFD_ME_SECTION depends on BUILD_WITH_FAKE_IFD string default "" config IFD_PLATFORM_SECTION depends on BUILD_WITH_FAKE_IFD string default "" config ME_BIN_PATH string "Path to management engine firmware" depends on HAVE_ME_BIN default "3rdparty/blobs/mainboard/$(MAINBOARDDIR)/me.bin" config MMCONF_BASE_ADDRESS hex "MMIO Base Address" default 0xe0000000 config MONOTONIC_TIMER_MSR def_bool y select HAVE_MONOTONIC_TIMER help Provide a monotonic timer using the 24MHz MSR counter. config PRE_GRAPHICS_DELAY int "Graphics initialization delay in ms" default 0 help On some systems, coreboot boots so fast that connected monitors (mostly TVs) won't be able to wake up fast enough to talk to the VBIOS. On those systems we need to wait for a bit before executing the VBIOS. config SERIAL_CPU_INIT bool default n config SERIRQ_CONTINUOUS_MODE bool default y help If you set this option to y, the serial IRQ machine will be operated in continuous mode. config SMM_RESERVED_SIZE hex default 0x200000 config SMM_TSEG_SIZE hex default 0x800000 config VGA_BIOS_ID string default "8086,0406" config UART_DEBUG bool "Enable UART debug port." default n select CONSOLE_SERIAL select DRIVERS_UART select DRIVERS_UART_8250MEM select DRIVERS_UART_8250MEM_32 config CHIPSET_BOOTBLOCK_INCLUDE string default "soc/intel/skylake/bootblock/timestamp.inc" endif