/* SPDX-License-Identifier: GPL-2.0-only */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* THC assignment definition */ #define THC_NONE 0 #define THC_0 1 #define THC_1 2 /* SATA DEVSLP idle timeout default values */ #define DEF_DMVAL 15 #define DEF_DITOVAL 625 /* * ME End of Post configuration * 0 - Disable EOP. * 1 - Send in PEI (Applicable for FSP in API mode) * 2 - Send in DXE (Not applicable for FSP in API mode) */ enum fsp_end_of_post { EOP_DISABLE = 0, EOP_PEI = 1, EOP_DXE = 2, }; static const pci_devfn_t i2c_dev[] = { PCI_DEVFN_I2C0, PCI_DEVFN_I2C1, PCI_DEVFN_I2C2, PCI_DEVFN_I2C3, PCI_DEVFN_I2C4, PCI_DEVFN_I2C5, }; static const pci_devfn_t gspi_dev[] = { PCI_DEVFN_GSPI0, PCI_DEVFN_GSPI1, PCI_DEVFN_GSPI2, }; static const pci_devfn_t uart_dev[] = { PCI_DEVFN_UART0, PCI_DEVFN_UART1, PCI_DEVFN_UART2 }; /* * Chip config parameter PcieRpL1Substates uses (UPD value + 1) * because UPD value of 0 for PcieRpL1Substates means disabled for FSP. * In order to ensure that mainboard setting does not disable L1 substates * incorrectly, chip config parameter values are offset by 1 with 0 meaning * use FSP UPD default. get_l1_substate_control() ensures that the right UPD * value is set in fsp_params. * 0: Use FSP UPD default * 1: Disable L1 substates * 2: Use L1.1 * 3: Use L1.2 (FSP UPD default) */ static int get_l1_substate_control(enum L1_substates_control ctl) { if ((ctl > L1_SS_L1_2) || (ctl == L1_SS_FSP_DEFAULT)) ctl = L1_SS_L1_2; return ctl - 1; } __weak void mainboard_update_soc_chip_config(struct soc_intel_meteorlake_config *config) { /* Override settings per board. */ } static void fill_fsps_lpss_params(FSP_S_CONFIG *s_cfg, const struct soc_intel_meteorlake_config *config) { int max_port, i; max_port = get_max_i2c_port(); for (i = 0; i < max_port; i++) { s_cfg->SerialIoI2cMode[i] = is_devfn_enabled(i2c_dev[i]) ? config->serial_io_i2c_mode[i] : 0; } max_port = get_max_gspi_port(); for (i = 0; i < max_port; i++) { s_cfg->SerialIoSpiCsMode[i] = config->serial_io_gspi_cs_mode[i]; s_cfg->SerialIoSpiCsState[i] = config->serial_io_gspi_cs_state[i]; s_cfg->SerialIoSpiMode[i] = is_devfn_enabled(gspi_dev[i]) ? config->serial_io_gspi_mode[i] : 0; } max_port = get_max_uart_port(); for (i = 0; i < max_port; i++) { s_cfg->SerialIoUartMode[i] = is_devfn_enabled(uart_dev[i]) ? config->serial_io_uart_mode[i] : 0; } } static void fill_fsps_cpu_params(FSP_S_CONFIG *s_cfg, const struct soc_intel_meteorlake_config *config) { const struct microcode *microcode_file; size_t microcode_len; /* Locate microcode and pass to FSP-S for 2nd microcode loading */ microcode_file = cbfs_map("cpu_microcode_blob.bin", µcode_len); if ((microcode_file) && (microcode_len != 0)) { /* Update CPU Microcode patch base address/size */ s_cfg->MicrocodeRegionBase = (uint32_t)microcode_file; s_cfg->MicrocodeRegionSize = (uint32_t)microcode_len; } if (CONFIG(MTL_USE_FSP_MP_INIT)) { /* * Use FSP running MP PPI services to perform CPU feature programming * if Kconfig is enabled */ s_cfg->CpuMpPpi = (uintptr_t) mp_fill_ppi_services_data(); } else { /* Use coreboot native driver to perform MP init by default */ s_cfg->CpuMpPpi = (uintptr_t)NULL; /* * FIXME: Bring back SkipMpInit UPD in MTL FSP to let coreboot perform * AP programming independently. */ // s_cfg->SkipMpInit = !CONFIG(USE_INTEL_FSP_MP_INIT); } } static void fill_fsps_igd_params(FSP_S_CONFIG *s_cfg, const struct soc_intel_meteorlake_config *config) { /* Load VBT before devicetree-specific config. */ s_cfg->GraphicsConfigPtr = (uintptr_t)vbt_get(); /* Check if IGD is present and fill Graphics init param accordingly */ s_cfg->PeiGraphicsPeimInit = CONFIG(RUN_FSP_GOP) && is_devfn_enabled(PCI_DEVFN_IGD); s_cfg->LidStatus = CONFIG(RUN_FSP_GOP); s_cfg->PavpEnable = CONFIG(PAVP); } static void fill_fsps_tcss_params(FSP_S_CONFIG *s_cfg, const struct soc_intel_meteorlake_config *config) { const struct device *tcss_port_arr[] = { DEV_PTR(tcss_usb3_port1), DEV_PTR(tcss_usb3_port2), DEV_PTR(tcss_usb3_port3), DEV_PTR(tcss_usb3_port4), }; s_cfg->TcssAuxOri = config->tcss_aux_ori; /* Explicitly clear this field to avoid using defaults */ memset(s_cfg->IomTypeCPortPadCfg, 0, sizeof(s_cfg->IomTypeCPortPadCfg)); /* D3Hot and D3Cold for TCSS */ s_cfg->D3HotEnable = !config->tcss_d3_hot_disable; s_cfg->D3ColdEnable = !config->tcss_d3_cold_disable; s_cfg->UsbTcPortEn = 0; for (int i = 0; i < MAX_TYPE_C_PORTS; i++) { if (is_dev_enabled(tcss_port_arr[i])) s_cfg->UsbTcPortEn |= BIT(i); } } static void fill_fsps_chipset_lockdown_params(FSP_S_CONFIG *s_cfg, const struct soc_intel_meteorlake_config *config) { /* Chipset Lockdown */ const bool lockdown_by_fsp = get_lockdown_config() == CHIPSET_LOCKDOWN_FSP; s_cfg->PchLockDownGlobalSmi = lockdown_by_fsp; s_cfg->PchLockDownBiosInterface = lockdown_by_fsp; s_cfg->PchUnlockGpioPads = !lockdown_by_fsp; s_cfg->RtcMemoryLock = lockdown_by_fsp; s_cfg->SkipPamLock = !lockdown_by_fsp; /* coreboot will send EOP before loading payload */ s_cfg->EndOfPostMessage = EOP_DISABLE; } static void fill_fsps_xhci_params(FSP_S_CONFIG *s_cfg, const struct soc_intel_meteorlake_config *config) { int i, max_port; max_port = get_max_usb20_port(); for (i = 0; i < max_port; i++) { s_cfg->PortUsb20Enable[i] = config->usb2_ports[i].enable; s_cfg->Usb2PhyPetxiset[i] = config->usb2_ports[i].pre_emp_bias; s_cfg->Usb2PhyTxiset[i] = config->usb2_ports[i].tx_bias; s_cfg->Usb2PhyPredeemp[i] = config->usb2_ports[i].tx_emp_enable; s_cfg->Usb2PhyPehalfbit[i] = config->usb2_ports[i].pre_emp_bit; if (config->usb2_ports[i].enable) s_cfg->Usb2OverCurrentPin[i] = config->usb2_ports[i].ocpin; else s_cfg->Usb2OverCurrentPin[i] = OC_SKIP; } max_port = get_max_usb30_port(); for (i = 0; i < max_port; i++) { s_cfg->PortUsb30Enable[i] = config->usb3_ports[i].enable; if (config->usb3_ports[i].enable) s_cfg->Usb3OverCurrentPin[i] = config->usb3_ports[i].ocpin; else s_cfg->Usb3OverCurrentPin[i] = OC_SKIP; if (config->usb3_ports[i].tx_de_emp) { s_cfg->Usb3HsioTxDeEmphEnable[i] = 1; s_cfg->Usb3HsioTxDeEmph[i] = config->usb3_ports[i].tx_de_emp; } if (config->usb3_ports[i].tx_downscale_amp) { s_cfg->Usb3HsioTxDownscaleAmpEnable[i] = 1; s_cfg->Usb3HsioTxDownscaleAmp[i] = config->usb3_ports[i].tx_downscale_amp; } } max_port = get_max_tcss_port(); for (i = 0; i < max_port; i++) { s_cfg->PortUsb30Enable[i] = config->tcss_ports[i].enable; if (config->tcss_ports[i].enable) s_cfg->CpuUsb3OverCurrentPin[i] = config->tcss_ports[i].ocpin; } } static void fill_fsps_xdci_params(FSP_S_CONFIG *s_cfg, const struct soc_intel_meteorlake_config *config) { s_cfg->XdciEnable = xdci_can_enable(PCI_DEVFN_USBOTG); } static void fill_fsps_uart_params(FSP_S_CONFIG *s_cfg, const struct soc_intel_meteorlake_config *config) { ASSERT(ARRAY_SIZE(s_cfg->SerialIoUartAutoFlow) > CONFIG_UART_FOR_CONSOLE); s_cfg->SerialIoUartAutoFlow[CONFIG_UART_FOR_CONSOLE] = 0; } static void fill_fsps_sata_params(FSP_S_CONFIG *s_cfg, const struct soc_intel_meteorlake_config *config) { /* SATA */ s_cfg->SataEnable = is_devfn_enabled(PCI_DEVFN_SATA); if (s_cfg->SataEnable) { s_cfg->SataMode = config->sata_mode; s_cfg->SataSalpSupport = config->sata_salp_support; memcpy(s_cfg->SataPortsEnable, config->sata_ports_enable, sizeof(s_cfg->SataPortsEnable)); memcpy(s_cfg->SataPortsDevSlp, config->sata_ports_dev_slp, sizeof(s_cfg->SataPortsDevSlp)); } /* * Power Optimizer for SATA. * SataPwrOptimizeDisable is default to 0. * Boards not needing the optimizers explicitly disables them by setting * these disable variables to 1 in devicetree overrides. */ s_cfg->SataPwrOptEnable = !(config->sata_pwr_optimize_disable); /* * Enable DEVSLP Idle Timeout settings DmVal and DitoVal. * SataPortsDmVal is the DITO multiplier. Default is 15. * SataPortsDitoVal is the DEVSLP Idle Timeout (DITO), Default is 625ms. * The default values can be changed from devicetree. */ for (size_t i = 0; i < ARRAY_SIZE(config->sata_ports_enable_dito_config); i++) { if (config->sata_ports_enable_dito_config[i]) { s_cfg->SataPortsDmVal[i] = config->sata_ports_dm_val[i]; s_cfg->SataPortsDitoVal[i] = config->sata_ports_dito_val[i]; } } } static void fill_fsps_thermal_params(FSP_S_CONFIG *s_cfg, const struct soc_intel_meteorlake_config *config) { /* Enable TCPU for processor thermal control */ s_cfg->Device4Enable = is_devfn_enabled(PCI_DEVFN_DPTF); /* Set TccActivationOffset */ s_cfg->TccActivationOffset = config->tcc_offset; } static void fill_fsps_lan_params(FSP_S_CONFIG *s_cfg, const struct soc_intel_meteorlake_config *config) { /* LAN */ s_cfg->PchLanEnable = is_devfn_enabled(PCI_DEVFN_GBE); } static void fill_fsps_cnvi_params(FSP_S_CONFIG *s_cfg, const struct soc_intel_meteorlake_config *config) { /* CNVi */ s_cfg->CnviMode = is_devfn_enabled(PCI_DEVFN_CNVI_WIFI); s_cfg->CnviBtCore = config->cnvi_bt_core; s_cfg->CnviBtAudioOffload = config->cnvi_bt_audio_offload; /* Assert if CNVi BT is enabled without CNVi being enabled. */ assert(s_cfg->CnviMode || !s_cfg->CnviBtCore); /* Assert if CNVi BT offload is enabled without CNVi BT being enabled. */ assert(s_cfg->CnviBtCore || !s_cfg->CnviBtAudioOffload); } static void fill_fsps_vmd_params(FSP_S_CONFIG *s_cfg, const struct soc_intel_meteorlake_config *config) { /* VMD */ s_cfg->VmdEnable = is_devfn_enabled(PCI_DEVFN_VMD); } static void fill_fsps_tbt_params(FSP_S_CONFIG *s_cfg, const struct soc_intel_meteorlake_config *config) { for (int i = 0; i < ARRAY_SIZE(s_cfg->ITbtPcieRootPortEn); i++) s_cfg->ITbtPcieRootPortEn[i] = is_devfn_enabled(PCI_DEVFN_TBT(i)); } static void fill_fsps_8254_params(FSP_S_CONFIG *s_cfg, const struct soc_intel_meteorlake_config *config) { /* Legacy 8254 timer support */ s_cfg->Enable8254ClockGating = !CONFIG(USE_LEGACY_8254_TIMER); s_cfg->Enable8254ClockGatingOnS3 = !CONFIG(USE_LEGACY_8254_TIMER); } static void fill_fsps_pcie_params(FSP_S_CONFIG *s_cfg, const struct soc_intel_meteorlake_config *config) { int max_port = get_max_pcie_port(); uint32_t enable_mask = pcie_rp_enable_mask(get_pcie_rp_table()); for (int i = 0; i < max_port; i++) { if (!(enable_mask & BIT(i))) continue; const struct pcie_rp_config *rp_cfg = &config->pcie_rp[i]; s_cfg->PcieRpL1Substates[i] = get_l1_substate_control(rp_cfg->PcieRpL1Substates); s_cfg->PcieRpLtrEnable[i] = !!(rp_cfg->flags & PCIE_RP_LTR); s_cfg->PcieRpAdvancedErrorReporting[i] = !!(rp_cfg->flags & PCIE_RP_AER); s_cfg->PcieRpHotPlug[i] = !!(rp_cfg->flags & PCIE_RP_HOTPLUG); s_cfg->PcieRpClkReqDetect[i] = !!(rp_cfg->flags & PCIE_RP_CLK_REQ_DETECT); } } static void fill_fsps_misc_power_params(FSP_S_CONFIG *s_cfg, const struct soc_intel_meteorlake_config *config) { s_cfg->Hwp = 1; s_cfg->Cx = 1; s_cfg->PsOnEnable = 1; /* Enable the energy efficient turbo mode */ s_cfg->EnergyEfficientTurbo = 1; s_cfg->PmcLpmS0ixSubStateEnableMask = get_supported_lpm_mask(); } static void fill_fsps_ufs_params(FSP_S_CONFIG *s_cfg, const struct soc_intel_meteorlake_config *config) { s_cfg->UfsEnable[0] = is_devfn_enabled(PCI_DEVFN_UFS); } static void fill_fsps_ai_params(FSP_S_CONFIG *s_cfg, const struct soc_intel_meteorlake_config *config) { s_cfg->GnaEnable = is_devfn_enabled(PCI_DEVFN_GNA); s_cfg->VpuEnable = is_devfn_enabled(PCI_DEVFN_VPU); } static void arch_silicon_init_params(FSPS_ARCH_UPD *s_arch_cfg) { /* UPDATEME: Disable for VP * EnableMultiPhaseSiliconInit for running MultiPhaseSiInit */ s_arch_cfg->EnableMultiPhaseSiliconInit = 0; /* Assign FspEventHandler arch Upd to use coreboot debug event handler */ if (CONFIG(FSP_USES_CB_DEBUG_EVENT_HANDLER) && CONFIG(CONSOLE_SERIAL) && CONFIG(FSP_ENABLE_SERIAL_DEBUG)) s_arch_cfg->FspEventHandler = (FSP_EVENT_HANDLER) fsp_debug_event_handler; } static void soc_silicon_init_params(FSP_S_CONFIG *s_cfg, struct soc_intel_meteorlake_config *config) { /* Override settings per board if required. */ mainboard_update_soc_chip_config(config); void (*fill_fsps_params[])(FSP_S_CONFIG *s_cfg, const struct soc_intel_meteorlake_config *config) = { fill_fsps_lpss_params, fill_fsps_cpu_params, fill_fsps_igd_params, fill_fsps_tcss_params, fill_fsps_chipset_lockdown_params, fill_fsps_xhci_params, fill_fsps_xdci_params, fill_fsps_uart_params, fill_fsps_sata_params, fill_fsps_thermal_params, fill_fsps_lan_params, fill_fsps_cnvi_params, fill_fsps_vmd_params, fill_fsps_tbt_params, fill_fsps_8254_params, fill_fsps_pcie_params, fill_fsps_misc_power_params, fill_fsps_ufs_params, fill_fsps_ai_params, }; for (size_t i = 0; i < ARRAY_SIZE(fill_fsps_params); i++) fill_fsps_params[i](s_cfg, config); } /* UPD parameters to be initialized before SiliconInit */ void platform_fsp_silicon_init_params_cb(FSPS_UPD *supd) { struct soc_intel_meteorlake_config *config; FSP_S_CONFIG *s_cfg = &supd->FspsConfig; FSPS_ARCH_UPD *s_arch_cfg = &supd->FspsArchUpd; config = config_of_soc(); arch_silicon_init_params(s_arch_cfg); soc_silicon_init_params(s_cfg, config); mainboard_silicon_init_params(s_cfg); } /* * Callbacks for SoC/Mainboard specific overrides for FspMultiPhaseSiInit * This platform supports below MultiPhaseSIInit Phase(s): * Phase | FSP return point | Purpose * ------- + ------------------------------------------------ + ------------------------------- * 1 | After TCSS initialization completed | for TCSS specific init */ void platform_fsp_multi_phase_init_cb(uint32_t phase_index) { switch (phase_index) { case 1: /* TCSS specific initialization here */ printk(BIOS_DEBUG, "FSP MultiPhaseSiInit %s/%s called\n", __FILE__, __func__); if (CONFIG(SOC_INTEL_COMMON_BLOCK_TCSS)) { const config_t *config = config_of_soc(); tcss_configure(config->typec_aux_bias_pads); } break; default: break; } } /* Mainboard GPIO Configuration */ __weak void mainboard_silicon_init_params(FSP_S_CONFIG *s_cfg) { printk(BIOS_DEBUG, "WEAK: %s/%s called\n", __FILE__, __func__); }