/* SPDX-License-Identifier: GPL-2.0-only */ #include #include #include #include #include #include #include #include #include #include #include static void config_deep_sX(uint32_t offset, uint32_t mask, int sx, int enable) { uint32_t reg; uint8_t *pmcbase = pmc_mmio_regs(); printk(BIOS_DEBUG, "%sabling Deep S%c\n", enable ? "En" : "Dis", sx + '0'); reg = read32(pmcbase + offset); if (enable) reg |= mask; else reg &= ~mask; write32(pmcbase + offset, reg); } static void config_deep_s5(int on_ac, int on_dc) { /* Treat S4 the same as S5. */ config_deep_sX(S4_PWRGATE_POL, S4AC_GATE_SUS, 4, on_ac); config_deep_sX(S4_PWRGATE_POL, S4DC_GATE_SUS, 4, on_dc); config_deep_sX(S5_PWRGATE_POL, S5AC_GATE_SUS, 5, on_ac); config_deep_sX(S5_PWRGATE_POL, S5DC_GATE_SUS, 5, on_dc); } static void config_deep_s3(int on_ac, int on_dc) { config_deep_sX(S3_PWRGATE_POL, S3AC_GATE_SUS, 3, on_ac); config_deep_sX(S3_PWRGATE_POL, S3DC_GATE_SUS, 3, on_dc); } static void config_deep_sx(uint32_t deepsx_config) { uint32_t reg; uint8_t *pmcbase = pmc_mmio_regs(); reg = read32(pmcbase + DSX_CFG); reg &= ~DSX_CFG_MASK; reg |= deepsx_config; write32(pmcbase + DSX_CFG, reg); } static void pmc_init(struct device *dev) { const config_t *config = config_of_soc(); rtc_init(); pmc_set_power_failure_state(true); pmc_gpe_init(); config_deep_s3(config->deep_s3_enable_ac, config->deep_s3_enable_dc); config_deep_s5(config->deep_s5_enable_ac, config->deep_s5_enable_dc); config_deep_sx(config->deep_sx_config); } static void soc_pmc_read_resources(struct device *dev) { struct resource *res; mmio_resource(dev, 0, PCH_PWRM_BASE_ADDRESS / KiB, PCH_PWRM_BASE_SIZE / KiB); res = new_resource(dev, 1); res->base = (resource_t)ACPI_BASE_ADDRESS; res->size = (resource_t)ACPI_BASE_SIZE; res->limit = res->base + res->size + 1; res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; } static void soc_acpi_mode_init(struct device *dev) { /* * pmc_set_acpi_mode() should be delayed until BS_DEV_INIT in order * to ensure the ordering does not break the assumptions that other * drivers make about ACPI mode (e.g. Chrome EC). Since it disables * ACPI mode, other drivers may take different actions based on this * (e.g. Chrome EC will flush any pending hostevent bits). Because * JSL has its PMC device available for device_operations, it can be * done from the "ops->init" callback. */ pmc_set_acpi_mode(); } static void pm1_enable_pwrbtn_smi(void *unused) { /* Enable power button SMI after BS_DEV_INIT_CHIPS (FSP-S) is done. */ pmc_update_pm1_enable(PWRBTN_EN); } BOOT_STATE_INIT_ENTRY(BS_DEV_INIT_CHIPS, BS_ON_EXIT, pm1_enable_pwrbtn_smi, NULL); static void pmc_fill_ssdt(const struct device *dev) { if (CONFIG(SOC_INTEL_COMMON_BLOCK_ACPI_PEP)) generate_acpi_power_engine(); } struct device_operations pmc_ops = { .read_resources = soc_pmc_read_resources, .set_resources = noop_set_resources, .init = soc_acpi_mode_init, .enable = pmc_init, #if CONFIG(HAVE_ACPI_TABLES) .acpi_fill_ssdt = pmc_fill_ssdt, #endif };