/* SPDX-License-Identifier: GPL-2.0-only */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static void soc_fsp_load(void) { fsps_load(); } static void configure_misc(void) { msr_t msr; config_t *conf = config_of_soc(); msr = rdmsr(IA32_MISC_ENABLE); msr.lo |= (1 << 0); /* Fast String enable */ msr.lo |= (1 << 3); /* TM1/TM2/EMTTM enable */ wrmsr(IA32_MISC_ENABLE, msr); /* Set EIST status */ cpu_set_eist(conf->eist_enable); /* Disable Thermal interrupts */ msr.lo = 0; msr.hi = 0; wrmsr(IA32_THERM_INTERRUPT, msr); /* Enable package critical interrupt only */ msr.lo = 1 << 4; msr.hi = 0; wrmsr(IA32_PACKAGE_THERM_INTERRUPT, msr); /* Enable PROCHOT */ msr = rdmsr(MSR_POWER_CTL); msr.lo |= (1 << 0); /* Enable Bi-directional PROCHOT as an input */ msr.lo |= (1 << 23); /* Lock it */ wrmsr(MSR_POWER_CTL, msr); } static void configure_c_states(void) { msr_t msr; /* C-state Interrupt Response Latency Control 1 - package C6/C7 short */ msr.hi = 0; msr.lo = IRTL_VALID | IRTL_32768_NS | C_STATE_LATENCY_CONTROL_1_LIMIT; wrmsr(MSR_C_STATE_LATENCY_CONTROL_1, msr); /* C-state Interrupt Response Latency Control 2 - package C6/C7 long */ msr.hi = 0; msr.lo = IRTL_VALID | IRTL_32768_NS | C_STATE_LATENCY_CONTROL_2_LIMIT; wrmsr(MSR_C_STATE_LATENCY_CONTROL_2, msr); /* C-state Interrupt Response Latency Control 3 - package C8 */ msr.hi = 0; msr.lo = IRTL_VALID | IRTL_32768_NS | C_STATE_LATENCY_CONTROL_3_LIMIT; wrmsr(MSR_C_STATE_LATENCY_CONTROL_3, msr); /* C-state Interrupt Response Latency Control 4 - package C9 */ msr.hi = 0; msr.lo = IRTL_VALID | IRTL_32768_NS | C_STATE_LATENCY_CONTROL_4_LIMIT; wrmsr(MSR_C_STATE_LATENCY_CONTROL_4, msr); /* C-state Interrupt Response Latency Control 5 - package C10 */ msr.hi = 0; msr.lo = IRTL_VALID | IRTL_32768_NS | C_STATE_LATENCY_CONTROL_5_LIMIT; wrmsr(MSR_C_STATE_LATENCY_CONTROL_5, msr); } /* All CPUs including BSP will run the following function. */ void soc_core_init(struct device *cpu) { /* Clear out pending MCEs */ /* TODO(adurbin): This should only be done on a cold boot. Also, some * of these banks are core vs package scope. For now every CPU clears * every bank. */ mca_configure(); /* Enable the local CPU apics */ enable_lapic_tpr(); setup_lapic(); /* Configure c-state interrupt response time */ configure_c_states(); /* Configure Enhanced SpeedStep and Thermal Sensors */ configure_misc(); enable_pm_timer_emulation(); /* Enable Direct Cache Access */ configure_dca_cap(); /* Set energy policy */ set_energy_perf_bias(ENERGY_POLICY_NORMAL); /* Enable Turbo */ enable_turbo(); } static void per_cpu_smm_trigger(void) { /* Relocate the SMM handler. */ smm_relocate(); } static void post_mp_init(void) { /* Set Max Ratio */ cpu_set_max_ratio(); /* * Now that all APs have been relocated as well as the BSP let SMIs * start flowing. */ global_smi_enable(); } static const struct mp_ops mp_ops = { /* * Skip Pre MP init MTRR programming as MTRRs are mirrored from BSP, * that are set prior to ramstage. * Real MTRRs programming are being done after resource allocation. */ .pre_mp_init = soc_fsp_load, .get_cpu_count = get_cpu_count, .get_smm_info = smm_info, .get_microcode_info = get_microcode_info, .pre_mp_smm_init = smm_initialize, .per_cpu_smm_trigger = per_cpu_smm_trigger, .relocation_handler = smm_relocation_handler, .post_mp_init = post_mp_init, }; void soc_init_cpus(struct bus *cpu_bus) { /* TODO: Handle mp_init_with_smm failure? */ mp_init_with_smm(cpu_bus, &mp_ops); }