##
## This file is part of the coreboot project.
##
## Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
## Copyright (C) 2013-2014 Sage Electronic Engineering, LLC.
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##

config SOC_INTEL_FSP_BAYTRAIL
	bool
	help
	  Bay Trail I part support using the Intel FSP.

if SOC_INTEL_FSP_BAYTRAIL

config CPU_SPECIFIC_OPTIONS
	def_bool y
	select ARCH_BOOTBLOCK_X86_32
	select ARCH_VERSTAGE_X86_32
	select ARCH_ROMSTAGE_X86_32
	select ARCH_RAMSTAGE_X86_32
	select DYNAMIC_CBMEM
	select BROKEN_CAR_MIGRATE
	select HAVE_SMI_HANDLER
	select HAVE_HARD_RESET
	select MMCONF_SUPPORT
	select MMCONF_SUPPORT_DEFAULT
	select RELOCATABLE_MODULES
	select PARALLEL_MP
	select REG_SCRIPT
	select SMM_MODULES
	select SMM_TSEG
	select BAYTRAIL_SMM
	select SMP
	select SPI_FLASH
	select SSE2
	select TSC_CONSTANT_RATE
	select TSC_SYNC_MFENCE
	select UDELAY_TSC
	select SUPPORT_CPU_UCODE_IN_CBFS if INCLUDE_MICROCODE_IN_BUILD
	select CPU_MICROCODE_ADDED_DURING_BUILD if INCLUDE_MICROCODE_IN_BUILD
	select ROMSTAGE_RTC_INIT
	select BROKEN_CAR_MIGRATE

config BOOTBLOCK_CPU_INIT
	string
	default "soc/intel/fsp_baytrail/bootblock/bootblock.c"

config MMCONF_BASE_ADDRESS
	hex
	default 0xe0000000

config MAX_CPUS
	int
	default 4

config CPU_ADDR_BITS
	int
	default 36

config SMM_TSEG_SIZE
	hex
	default 0x100000
	help
	  This is set by the FSP

config SMM_RESERVED_SIZE
	hex
	default 0x100000

config VGA_BIOS_ID
	string
	default "8086,0f31"
	help
	  This is the default PCI ID for the Bay Trail graphics
	  devices.  This string names the vbios ROM in cbfs.

config INCLUDE_MICROCODE_IN_BUILD
	bool "Build in microcode patch"
	default n
	help
	  Enable if the microcode patch is available.  For the
	  BayTrail - I processors, the filename should start with
	  "M01".  Using a microcode patch for the incorrect BayTrail
	  SKU will lead to unpredictable results.

config MICROCODE_INCLUDE_PATH
	string "Microcode Include path"
	default "../intel/cpu/baytrail/microcode"
	depends on SUPPORT_CPU_UCODE_IN_CBFS

config CPU_MICROCODE_CBFS_LOC
	hex
	default 0xfff10040

config CBFS_SIZE
	hex
	default 0x200000
	help
	  On Bay Trail systems the firmware image has to store a lot more
	  than just coreboot, including:
	   - a firmware descriptor
	   - Intel Trusted Execution Engine firmware
	  This option specifies the maximum size of the CBFS portion in the
	  firmware image.

config INCLUDE_ME
	bool "Include the TXE"
	default n
	help
	  Build the TXE and descriptor.bin into the ROM image.  If you want to use a
	  descriptor.bin and TXE file from the previous ROM image, you may not want
	  to build it in here.

config ME_PATH
	string
	depends on INCLUDE_ME
	help
	  The path of the TXE and Descriptor files.

config LOCK_MANAGEMENT_ENGINE
	bool "Lock TXE section"
	default n
	depends on INCLUDE_ME
	help
	  The Intel Trusted Execution Engine supports preventing write accesses
	  from the host to the Management Engine section in the firmware
	  descriptor. If the ME section is locked, it can only be overwritten
	  with an external SPI flash programmer. You will want this if you
	  want to increase security of your ROM image once you are sure
	  that the ME firmware is no longer going to change.

	  If unsure, say N.

config ENABLE_BUILTIN_COM1
	bool "Enable built-in legacy Serial Port"
	help
	  The Baytrail SOC has one legacy serial port. Choose this option to
	  configure the pads and enable it. This serial port can be used for
	  the debug console.

config VGA_BIOS_FILE
	string
	default "../intel/cpu/baytrail/vbios/Vga.dat" if VGA_BIOS

## Baytrail Specific FSP Kconfig
source src/soc/intel/fsp_baytrail/fsp/Kconfig

endif	#SOC_INTEL_FSP_BAYTRAIL