/* SPDX-License-Identifier: GPL-2.0-only */ #include #include #include #include #include #include #include #include #include #include #define XHCI_USB2 2 #define XHCI_USB3 3 #define XHCI_USBCMD 0x80 #define USBCMD_HCRST (1 << 1) /* Current Connect Status */ #define XHCI_STATUS_CCS (1 << 0) static uint8_t *xhci_mem_base(void) { uint32_t mem_base = pci_read_config32(PCH_DEV_XHCI, PCI_BASE_ADDRESS_0); /* Check if the controller is disabled or not present */ if (mem_base == 0 || mem_base == 0xffffffff) return 0; return (uint8_t *)(uintptr_t)(mem_base & ~PCI_BASE_ADDRESS_MEM_ATTR_MASK); } void xhci_host_reset(void) { uint8_t *xhci_base = xhci_mem_base(); if (!xhci_base) return; setbits8(xhci_base + XHCI_USBCMD, USBCMD_HCRST); } #if ENV_RAMSTAGE static bool is_usb_port_connected(const struct xhci_usb_info *info, unsigned int port_type, unsigned int port_id) { uintptr_t port_sts_reg; uint32_t port_status; const struct resource *res; /* Support only USB2 or USB3 ports */ if (!(port_type == XHCI_USB2 || port_type == XHCI_USB3)) return false; /* Mark out of bound port id as not connected */ if ((port_type == XHCI_USB2 && port_id >= info->num_usb2_ports) || (port_type == XHCI_USB3 && port_id >= info->num_usb3_ports)) return false; /* Calculate port status register address and read the status */ res = probe_resource(PCH_DEV_XHCI, PCI_BASE_ADDRESS_0); /* If the memory BAR is not allocated for XHCI, leave the devices enabled */ if (!res) return true; if (port_type == XHCI_USB2) port_sts_reg = (uintptr_t)res->base + info->usb2_port_status_reg + port_id * 0x10; else port_sts_reg = (uintptr_t)res->base + info->usb3_port_status_reg + port_id * 0x10; port_status = read32p(port_sts_reg); /* Ensure that the status is not all 1s */ if (port_status == 0xffffffff) return false; return !!(port_status & XHCI_STATUS_CCS); } void usb_xhci_disable_unused(bool (*ext_usb_xhci_en_cb)(unsigned int port_type, unsigned int port_id)) { struct device *xhci, *hub = NULL, *port = NULL; const struct xhci_usb_info *info = soc_get_xhci_usb_info(PCH_DEVFN_XHCI); struct drivers_usb_acpi_config *config; bool enable; xhci = pcidev_path_on_root(PCH_DEVFN_XHCI); if (!xhci) { printk(BIOS_ERR, "%s: Could not locate XHCI device in DT\n", __func__); return; } while ((hub = dev_bus_each_child(xhci->link_list, hub)) != NULL) { while ((port = dev_bus_each_child(hub->link_list, port)) != NULL) { enable = true; config = config_of(port); if (config->type == UPC_TYPE_INTERNAL) { /* Probe the connect status of internal ports */ enable = is_usb_port_connected(info, port->path.usb.port_type, port->path.usb.port_id); } else if (ext_usb_xhci_en_cb) { /* Check the mainboard for the status of external ports */ enable = ext_usb_xhci_en_cb(port->path.usb.port_type, port->path.usb.port_id); } if (!enable) { printk(BIOS_INFO, "%s: Disabling USB Type%d Id%d\n", __func__, port->path.usb.port_type, port->path.usb.port_id); port->enabled = 0; } } } } __weak void soc_xhci_init(struct device *dev) { /* no-op */ } struct device_operations usb_xhci_ops = { .read_resources = pci_dev_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .init = soc_xhci_init, .ops_pci = &pci_dev_ops_pci, .scan_bus = scan_static_bus, #if CONFIG(HAVE_ACPI_TABLES) .acpi_name = soc_acpi_name, #endif }; static const unsigned short pci_device_ids[] = { PCI_DID_INTEL_MTL_XHCI, PCI_DID_INTEL_APL_XHCI, PCI_DID_INTEL_CNL_LP_XHCI, PCI_DID_INTEL_GLK_XHCI, PCI_DID_INTEL_LWB_XHCI, PCI_DID_INTEL_LWB_XHCI_SUPER, PCI_DID_INTEL_CNP_H_XHCI, PCI_DID_INTEL_ICP_LP_XHCI, PCI_DID_INTEL_CMP_LP_XHCI, PCI_DID_INTEL_CMP_H_XHCI, PCI_DID_INTEL_TGP_LP_XHCI, PCI_DID_INTEL_TGP_H_XHCI, PCI_DID_INTEL_MCC_XHCI, PCI_DID_INTEL_JSP_XHCI, PCI_DID_INTEL_ADP_P_XHCI, PCI_DID_INTEL_ADP_S_XHCI, PCI_DID_INTEL_ADP_M_XHCI, PCI_DID_INTEL_RPP_S_XHCI, 0 }; static const struct pci_driver pch_usb_xhci __pci_driver = { .ops = &usb_xhci_ops, .vendor = PCI_VID_INTEL, .devices = pci_device_ids, }; #endif