config SOC_INTEL_COMMON_BLOCK_GPIO
	bool
	select HAVE_DEBUG_GPIO
	select HAVE_GPIO_SNAPSHOT_VERIFY_SUPPORT
	help
	  Intel Processor common GPIO support

if SOC_INTEL_COMMON_BLOCK_GPIO

# Use to program Interrupt Polarity Control (IPCx) register
# Each bit represents IRQx Active High Polarity Disable configuration:
# when set to 1, the interrupt polarity associated with IRQx is inverted
# to appear as Active Low to IOAPIC and vice versa
config SOC_INTEL_COMMON_BLOCK_GPIO_ITSS_POL_CFG
	bool
	default n

# Used to configure Pad Tolerance as 1.8V or 3.3V
config SOC_INTEL_COMMON_BLOCK_GPIO_PADCFG_PADTOL
	bool
	default n

# Used to configure IOSSTATE and IOSTERM
config SOC_INTEL_COMMON_BLOCK_GPIO_IOSTANDBY
	bool
	default n

# Indicate if multiple ACPI devices are used for each gpio community.
config SOC_INTEL_COMMON_BLOCK_GPIO_MULTI_ACPI_DEVICES
	bool
	default n

# Indicate if SoC supports dual-routing of GPIOs (to different paths like SCI,
# NMI, SMI, IOAPIC). This is required to support IRQ and wake on the same pad.
config SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT
	bool
	default n

config SOC_INTEL_COMMON_BLOCK_GPIO_LOCK_USING_SBI
	bool
	default n
	help
	  Till ADL PCH,`Pad Configuration Lock` can only be set or cleared
	  using non-posted sideband write.

config SOC_INTEL_COMMON_BLOCK_GPIO_LOCK_USING_PCR
	bool
	default n
	depends on !SOC_INTEL_COMMON_BLOCK_GPIO_LOCK_USING_SBI
	help
	  SoC user to select this config if `Pad Configuration Lock` can only be set or
	  cleared using private configuration register (PCR) write.
	  Starting with MTL SoC, the recommendation is to use PCR for locking down the
	  GPIO configuration.

endif