## SPDX-License-Identifier: GPL-2.0-only config SOC_INTEL_COMMON_BLOCK_CPU bool default n help This option selects Intel Common CPU Model support code which provides various CPU related APIs which are common between all Intel Processor families. Common CPU code is supported for SOCs starting from SKL,KBL,APL, and future. config SOC_INTEL_COMMON_BLOCK_CPU_MPINIT bool default n help This option selects Intel Common CPU MP Init code. In this common MP Init mechanism, the MP Init is occurring before calling FSP Silicon Init. Hence, MP Init will be pulled to BS_DEV_INIT_CHIPS Entry. And on Exit of BS_DEV_INIT, it is ensured that all MTRRs are re-programmed based on the DRAM resource settings. choice prompt "Application Processors (AP) Feature Programming Configuration to use" default USE_FSP_FEATURE_PROGRAM_ON_APS if MP_SERVICES_PPI_V1 || MP_SERVICES_PPI_V2 default USE_COREBOOT_MP_INIT if MP_SERVICES_PPI_V2_NOOP config USE_FSP_FEATURE_PROGRAM_ON_APS bool "Allow FSP running CPU feature programming on MP init" help Upon selection, coreboot brings APs from reset and the FSP runs feature programming. config USE_COREBOOT_MP_INIT bool "Use coreboot MP init" # FSP assumes ownership of the APs (Application Processors) # upon passing `NULL` pointer to the CpuMpPpi FSP-S UPD. # Hence, select `MP_SERVICES_PPI_V2_NOOP` config to pass a valid # pointer to the CpuMpPpi UPD with FSP_UNSUPPORTED type APIs. # This will protect APs from getting hijacked by FSP while coreboot # decides to set SkipMpInit UPD. select RELOAD_MICROCODE_PATCH help Upon selection, coreboot performs MP Init. endchoice config SOC_INTEL_COMMON_BLOCK_CPU_SMMRELOCATE bool depends on SOC_INTEL_COMMON_BLOCK_CPU config SOC_INTEL_COMMON_BLOCK_CAR bool default n help This option allows you to select how cache-as-ram (CAR) is set up. config INTEL_CAR_NEM bool default n help Traditionally, CAR is set up by using Non-Evict mode. This method does not allow CAR and cache to co-exist, because cache fills are blocked in NEM. config INTEL_CAR_CQOS bool default n help Cache Quality of Service allows more fine-grained control of cache usage. As result, it is possible to set up a portion of L2 cache for CAR and use the remainder for actual caching. config INTEL_CAR_NEM_ENHANCED bool default n help A current limitation of NEM (Non-Evict mode) is that code and data sizes are derived from the requirement to not write out any modified cache line. With NEM, if there is no physical memory behind the cached area, the modified data will be lost and NEM results will be inconsistent. ENHANCED NEM guarantees that modified data is always kept in cache while clean data is replaced. config CAR_HAS_SF_MASKS bool depends on INTEL_CAR_NEM_ENHANCED help In the case of non-inclusive cache architecture Snoop Filter MSR IA32_L3_SF_MASK_x programming is required along with the data ways. This is applicable for TGL and beyond. config SF_MASK_2WAYS_PER_BIT bool depends on INTEL_CAR_NEM_ENHANCED help In the case of non-inclusive cache architecture when two ways in the SF mask are controlled by one bit of the SF QoS register. This is applicable for TGL alone. config COS_MAPPED_TO_MSB bool depends on INTEL_CAR_NEM_ENHANCED help On TGL and JSL platform the class of service configuration is mapped to MSB of MSR IA32_PQR_ASSOC. config CAR_HAS_L3_PROTECTED_WAYS bool depends on INTEL_CAR_NEM_ENHANCED help On ADL and onwards platform has a newer requirement to protect L3 ways in Non-Inclusive eNEM mode. Hence, MSR 0xc85 is to program the data ways. config USE_INTEL_FSP_MP_INIT bool "Perform MP Initialization by FSP" default n depends on !USE_INTEL_FSP_TO_CALL_COREBOOT_PUBLISH_MP_PPI help This option allows FSP to perform multiprocessor initialization. config USE_INTEL_FSP_TO_CALL_COREBOOT_PUBLISH_MP_PPI bool "Perform MP Initialization by FSP using coreboot MP PPI service" default y depends on MP_SERVICES_PPI help This option allows FSP to make use of MP services PPI published by coreboot to perform multiprocessor initialization. config CPU_SUPPORTS_INTEL_TME bool default n help Select this if the SoC supports Intel Total Memory Encryption (TME). config INTEL_TME bool "Total Memory Encryption (TME)/Multi-key TME (MKTME)" depends on CPU_SUPPORTS_INTEL_TME default y help Enable Total Memory Encryption (TME)/Multi-key TME (MKTME). The spec is available at "https://software.intel.com/sites/default/files/managed/a5 /16/Multi-Key-Total-Memory-Encryption-Spec.pdf". If CPU supports TME, it would get enabled. If CPU supports MKTME, this same config option enables MKTME. config TME_KEY_REGENERATION_ON_WARM_BOOT bool "Generate new TME key on each warm boot" depends on INTEL_TME default n help Program Intel TME to generate a new key for each warm boot. TME always generates a new key on each cold boot. With this option enabled TME generates a new key even in warm boot. Without this option TME reuses the key for warm boot. If a new key is generated on warm boot, DRAM contents from previous warm boot will not get decrypted. This creates issue in accessing CBMEM region from previous warm boot. To mitigate the issue coreboot also programs exclusion range. Intel TME does not encrypt physical memory range set in exclusion range. Current coreboot implementation programs TME to exclude CBMEM region. When this config option is enabled, coreboot instructs Intel FSP to program TME to generate a new key on every warm boot and also exclude CBMEM region from being encrypted by TME. config CPU_XTAL_HZ int help Base clock which virtually everything runs on. config CPU_SUPPORTS_PM_TIMER_EMULATION bool default n help Select this if the SoC's ucode supports PM ACPI timer emulation (Common timer Copy), which is required to be able to disable the TCO PM ACPI timer for power saving. config SOC_INTEL_NO_BOOTGUARD_MSR bool help Select this on platforms that do not support Bootguard related MSRs 0x139, MSR_BC_PBEC and 0x13A, MSR_BOOT_GUARD_SACM_INFO. config SOC_INTEL_DISABLE_POWER_LIMITS bool default n help Select this if the Running Average Power Limits (RAPL) algorithm for constant power management is not needed. config SOC_INTEL_SET_MIN_CLOCK_RATIO bool depends on !SOC_INTEL_DISABLE_POWER_LIMITS default n help If the power budget of the mainboard is limited, it can be useful to limit the CPU power dissipation at the cost of performance by setting the lowest possible CPU clock. Enable this option if you need smallest possible CPU clock. This setting can be overruled by the OS if it has an p-state driver which can adjust the clock to its need. config HAVE_HYPERTHREADING def_bool n config FSP_HYPERTHREADING bool "Enable Hyper-Threading" depends on HAVE_HYPERTHREADING default y config INTEL_KEYLOCKER bool "Intel Key Locker" default n help Enable Intel Key Locker if supported by the CPU. Intel Key Locker provides a mechanism to encrypt and decrypt data with an AES key without having access to the raw key value by converting AES keys into "handles". The specification of Key Locker can be found via document #343965 on Intel's site. config SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE int depends on INTEL_KEYLOCKER || SOC_INTEL_COMMON_BLOCK_SGX_ENABLE default 256 if SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_256MB || SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_MAX default 128 if SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_128MB default 64 if SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_64MB default 32 if SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_32MB default 16 if SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_16MB default 8 if SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_8MB default 4 if SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_4MB default 2 if SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_2MB default 0 if SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_0MB default 0 choice prompt "PRMRR size" depends on INTEL_KEYLOCKER || SOC_INTEL_COMMON_BLOCK_SGX default SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_MAX if SOC_INTEL_COMMON_BLOCK_SGX_ENABLE default SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_2MB if !SOC_INTEL_COMMON_BLOCK_SGX_ENABLE && INTEL_KEYLOCKER default SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_0MB if !SOC_INTEL_COMMON_BLOCK_SGX_ENABLE && !INTEL_KEYLOCKER help PRMRR (Protected Memory Range) is the space in RAM that is used to provide a protected memory area (e.g. for the Intel SGX Secure Enclaves and Intel Key Locker). The memory region is accessible only by the processor itself to protect the data from unauthorized access. This option allows to select PRMRR size for the intended feature. Depending on the SoC a lower, compatible value may be chosen at runtime as not all values are supported on all families. config SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_MAX bool "Maximum" config SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_256MB bool "256 MiB" config SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_128MB bool "128 MiB" config SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_64MB bool "64 MiB" config SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_32MB bool "32 MiB" config SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_16MB bool "16 MiB" config SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_8MB bool "8 MiB" config SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_4MB bool "4 MiB" config SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_2MB bool "2 MiB" config SOC_INTEL_COMMON_BLOCK_PRMRR_SIZE_0MB bool "0 MiB" endchoice