/* * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. * Copyright (C) 2015 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /* * Helper functions for dealing with power management registers * and the differences between PCH variants. */ #define __SIMPLE_DEVICE__ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "chip.h" /* * SMI */ const char *const *soc_smi_sts_array(size_t *a) { static const char *const smi_sts_bits[] = { [BIOS_STS_BIT] = "BIOS", [LEGACY_USB_STS_BIT] = "LEGACY_USB", [SMI_ON_SLP_EN_STS_BIT] = "SLP_SMI", [APM_STS_BIT] = "APM", [SWSMI_TMR_STS_BIT] = "SWSMI_TMR", [PM1_STS_BIT] = "PM1", [GPE0_STS_BIT] = "GPE0", [GPIO_STS_BIT] = "GPI", [MCSMI_STS_BIT] = "MCSMI", [DEVMON_STS_BIT] = "DEVMON", [TCO_STS_BIT] = "TCO", [PERIODIC_STS_BIT] = "PERIODIC", [SERIRQ_SMI_STS_BIT] = "SERIRQ_SMI", [SMBUS_SMI_STS_BIT] = "SMBUS_SMI", [PCI_EXP_SMI_STS_BIT] = "PCI_EXP_SMI", [MONITOR_STS_BIT] = "MONITOR", [SPI_SMI_STS_BIT] = "SPI", [GPIO_UNLOCK_SMI_STS_BIT] = "GPIO_UNLOCK", [ESPI_SMI_STS_BIT] = "ESPI_SMI", }; *a = ARRAY_SIZE(smi_sts_bits); return smi_sts_bits; } /* * TCO */ const char *const *soc_tco_sts_array(size_t *a) { static const char *const tco_sts_bits[] = { [0] = "NMI2SMI", [1] = "SW_TCO", [2] = "TCO_INT", [3] = "TIMEOUT", [7] = "NEWCENTURY", [8] = "BIOSWR", [9] = "DMISCI", [10] = "DMISMI", [12] = "DMISERR", [13] = "SLVSEL", [16] = "INTRD_DET", [17] = "SECOND_TO", [18] = "BOOT", [20] = "SMLINK_SLV" }; *a = ARRAY_SIZE(tco_sts_bits); return tco_sts_bits; } /* * GPE0 */ const char *const *soc_gpe_sts_array(size_t *a) { static const char *const gpe_sts_bits[] = { [1] = "HOTPLUG", [2] = "SWGPE", [6] = "TCO_SCI", [7] = "SMB_WAK", [9] = "PCI_EXP", [10] = "BATLOW", [11] = "PME", [12] = "ME", [13] = "PME_B0", [14] = "eSPI", [15] = "GPIO Tier-2", [16] = "LAN_WAKE", [18] = "WADT" }; *a = ARRAY_SIZE(gpe_sts_bits); return gpe_sts_bits; } int acpi_sci_irq(void) { int scis = pci_read_config32(PCH_DEV_PMC, ACTL) & SCI_IRQ_SEL; int sci_irq = 9; /* Determine how SCI is routed. */ switch (scis) { case SCIS_IRQ9: case SCIS_IRQ10: case SCIS_IRQ11: sci_irq = scis - SCIS_IRQ9 + 9; break; case SCIS_IRQ20: case SCIS_IRQ21: case SCIS_IRQ22: case SCIS_IRQ23: sci_irq = scis - SCIS_IRQ20 + 20; break; default: printk(BIOS_DEBUG, "Invalid SCI route! Defaulting to IRQ9.\n"); sci_irq = 9; break; } printk(BIOS_DEBUG, "SCI is IRQ%d\n", sci_irq); return sci_irq; } uint8_t *pmc_mmio_regs(void) { uint32_t reg32; reg32 = pci_read_config32(PCH_DEV_PMC, PWRMBASE); return (void *)(uintptr_t)ALIGN_DOWN(reg32, 4 * KiB); } uint16_t smbus_tco_regs(void) { uint16_t reg16; reg16 = pci_read_config16(PCH_DEV_SMBUS, TCOBASE); return ALIGN_DOWN(reg16, 0x20); } uint32_t soc_reset_tco_status(void) { u16 tco1_sts; u16 tco2_sts; u16 tcobase; tcobase = smbus_tco_regs(); /* TCO Status 2 register */ tco2_sts = inw(tcobase + TCO2_STS); tco2_sts |= TCO2_STS_SECOND_TO; outw(tco2_sts, tcobase + TCO2_STS); /* TCO Status 1 register */ tco1_sts = inw(tcobase + TCO1_STS); /* Clear SECOND_TO_STS bit */ if (tco2_sts & TCO2_STS_SECOND_TO) outw(tco2_sts & ~TCO2_STS_SECOND_TO, tcobase + TCO2_STS); return (tco2_sts << 16) | tco1_sts; } uintptr_t soc_read_pmc_base(void) { return (uintptr_t)pmc_mmio_regs(); } void soc_get_gpe_configs(uint8_t *dw0, uint8_t *dw1, uint8_t *dw2) { DEVTREE_CONST struct soc_intel_cannonlake_config *config; /* Look up the device in devicetree */ DEVTREE_CONST struct device *dev = dev_find_slot(0, PCH_DEVFN_PMC); if (!dev || !dev->chip_info) { printk(BIOS_ERR, "BUG! Could not find SOC devicetree config\n"); return; } config = dev->chip_info; /* Assign to out variable */ *dw0 = config->gpe0_dw0; *dw1 = config->gpe0_dw1; *dw2 = config->gpe0_dw2; }