/* SPDX-License-Identifier: GPL-2.0-only */

#include <device/device.h>
#include <device/pci.h>
#include <pc80/isa-dma.h>
#include <pc80/i8259.h>
#include <arch/io.h>
#include <device/pci_ops.h>
#include <arch/ioapic.h>
#include <intelblocks/itss.h>
#include <intelblocks/lpc_lib.h>
#include <intelblocks/pcr.h>
#include <soc/iomap.h>
#include <soc/irq.h>
#include <soc/lpc.h>
#include <soc/pci_devs.h>
#include <soc/pcr_ids.h>

#include "chip.h"

/*
* As per the BWG, Chapter 5.9.1. "PCH BIOS component will reserve
* certain memory range as reserved range for BIOS usage.
* For this SOC, the range will be from 0FC800000h till FE7FFFFFh"
*/
static const struct lpc_mmio_range cnl_lpc_fixed_mmio_ranges[] = {
	{ PCH_PRESERVED_BASE_ADDRESS, PCH_PRESERVED_BASE_SIZE },
	{ 0, 0 }
};

const struct lpc_mmio_range *soc_get_fixed_mmio_ranges()
{
	return cnl_lpc_fixed_mmio_ranges;
}

void soc_get_gen_io_dec_range(uint32_t *gen_io_dec)
{
	const config_t *config = config_of_soc();

	gen_io_dec[0] = config->gen1_dec;
	gen_io_dec[1] = config->gen2_dec;
	gen_io_dec[2] = config->gen3_dec;
	gen_io_dec[3] = config->gen4_dec;
}

void soc_setup_dmi_pcr_io_dec(uint32_t *gen_io_dec)
{
	/* Mirror these same settings in DMI PCR */
	pcr_write32(PID_DMI, PCR_DMI_LPCLGIR1, gen_io_dec[0]);
	pcr_write32(PID_DMI, PCR_DMI_LPCLGIR2, gen_io_dec[1]);
	pcr_write32(PID_DMI, PCR_DMI_LPCLGIR3, gen_io_dec[2]);
	pcr_write32(PID_DMI, PCR_DMI_LPCLGIR4, gen_io_dec[3]);
}

uint8_t get_pch_series(void)
{
	uint16_t lpc_did_hi_byte;
	uint8_t pch_series = PCH_UNKNOWN_SERIES;
	/*
	 * Fetch upper 8 bits on LPC device ID to determine PCH type
	 * Adding 1 to the offset to fetch upper 8 bits
	 */
	lpc_did_hi_byte = pci_read_config8(PCH_DEV_LPC, PCI_DEVICE_ID + 1);

	switch (lpc_did_hi_byte) {
	case 0x9D: /* CNL-LP */
	case 0x02: /* CML-LP */
		pch_series = PCH_LP;
		break;
	case 0xA3: /* CFL-H */
	case 0x06: /* CML-H */
		pch_series = PCH_H;
		break;
	default:
		break;
	}
	return pch_series;
}

#if ENV_RAMSTAGE
static void soc_mirror_dmi_pcr_io_dec(void)
{
	uint32_t io_dec_arr[] = {
		pci_read_config32(PCH_DEV_LPC, LPC_GEN1_DEC),
		pci_read_config32(PCH_DEV_LPC, LPC_GEN2_DEC),
		pci_read_config32(PCH_DEV_LPC, LPC_GEN3_DEC),
		pci_read_config32(PCH_DEV_LPC, LPC_GEN4_DEC),
	};
	/* Mirror these same settings in DMI PCR */
	soc_setup_dmi_pcr_io_dec(&io_dec_arr[0]);
}

void lpc_soc_init(struct device *dev)
{
	const config_t *config = dev->chip_info;

	/* Legacy initialization */
	isa_dma_init();
	pch_misc_init();

	/* Enable CLKRUN_EN for power gating LPC */
	lpc_enable_pci_clk_cntl();

	/* Set LPC Serial IRQ mode */
	lpc_set_serirq_mode(config->serirq_mode);

	/* Interrupt configuration */
	pch_enable_ioapic();
	pch_pirq_init();
	setup_i8259();
	i8259_configure_irq_trigger(9, 1);
	soc_mirror_dmi_pcr_io_dec();
}

/* Fill up LPC IO resource structure inside SoC directory */
void pch_lpc_soc_fill_io_resources(struct device *dev)
{
	/*
	 * PMC pci device gets hidden from PCI bus due to Silicon
	 * policy hence bind ACPI BASE aka ABASE (offset 0x20) with
	 * LPC IO resources to ensure that ABASE falls under PCI reserved
	 * IO memory range.
	 *
	 * Note: Don't add any more resource with same offset 0x20
	 * under this device space.
	 */
	pch_lpc_add_new_resource(dev, PCI_BASE_ADDRESS_4,
			ACPI_BASE_ADDRESS, ACPI_BASE_SIZE, IORESOURCE_IO |
			IORESOURCE_ASSIGNED | IORESOURCE_FIXED);
}

#endif