/* * This file is part of the coreboot project. * * Copyright (C) 2014 Google Inc. * Copyright (C) 2017 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define PSF_BASE_ADDRESS 0x300 #define PCR_PSFX_T0_SHDW_PCIEN 0x1C #define PCR_PSFX_T0_SHDW_PCIEN_FUNDIS (1 << 8) static void pch_configure_endpoints(device_t dev, int epmask_id, uint32_t mask) { uint32_t reg32; reg32 = pci_read_config32(dev, PCH_P2SB_EPMASK(epmask_id)); pci_write_config32(dev, PCH_P2SB_EPMASK(epmask_id), reg32 | mask); } static void disable_sideband_access(void) { device_t dev; u8 reg8; uint32_t mask; dev = PCH_DEV_P2SB; /* Remove the host accessing right to PSF register range. */ /* Set p2sb PCI offset EPMASK5 [29, 28, 27, 26] to [1, 1, 1, 1] */ mask = (1 << 29) | (1 << 28) | (1 << 27) | (1 << 26); pch_configure_endpoints(dev, 5, mask); /* Set the "Endpoint Mask Lock!", P2SB PCI offset E2h bit[1] to 1. */ reg8 = pci_read_config8(dev, PCH_P2SB_E0 + 2); pci_write_config8(dev, PCH_P2SB_E0 + 2, reg8 | (1 << 1)); } static void pch_disable_heci(void) { device_t dev = PCH_DEV_P2SB; /* * if p2sb device 1f.1 is not present or hidden in devicetree * p2sb device becomes NULL */ if (!dev) return; /* unhide p2sb device */ pci_write_config8(dev, PCH_P2SB_E0 + 1, 0); /* disable heci#1 */ pcr_or32(PID_PSF1, PSF_BASE_ADDRESS + PCR_PSFX_T0_SHDW_PCIEN, PCR_PSFX_T0_SHDW_PCIEN_FUNDIS); disable_sideband_access(); /* hide p2sb device */ pci_write_config8(dev, PCH_P2SB_E0 + 1, 1); } static void pch_finalize(void) { device_t dev; uint32_t reg32; uint16_t tcobase, tcocnt; uint8_t *pmcbase; config_t *config; uint8_t reg8; /* TCO Lock down */ tcobase = smbus_tco_regs(); tcocnt = inw(tcobase + TCO1_CNT); tcocnt |= TCO_LOCK; outw(tcocnt, tcobase + TCO1_CNT); /* * Disable ACPI PM timer based on dt policy * * Disabling ACPI PM timer is necessary for XTAL OSC shutdown. * Disabling ACPI PM timer also switches off TCO */ dev = PCH_DEV_PMC; config = dev->chip_info; pmcbase = pmc_mmio_regs(); if (config->PmTimerDisabled) { reg8 = read8(pmcbase + PCH_PWRM_ACPI_TMR_CTL); reg8 |= (1 << 1); write8(pmcbase + PCH_PWRM_ACPI_TMR_CTL, reg8); } /* Disable XTAL shutdown qualification for low power idle. */ if (config->s0ix_enable) { reg32 = read32(pmcbase + CPPMVRIC); reg32 |= XTALSDQDIS; write32(pmcbase + CPPMVRIC, reg32); } /* we should disable Heci1 based on the devicetree policy */ if (config->HeciEnabled == 0) pch_disable_heci(); } static void soc_finalize(void *unused) { printk(BIOS_DEBUG, "Finalizing chipset.\n"); pch_finalize(); printk(BIOS_DEBUG, "Finalizing SMM.\n"); outb(APM_CNT_FINALIZE, APM_CNT); /* Indicate finalize step with post code */ post_code(POST_OS_BOOT); } BOOT_STATE_INIT_ENTRY(BS_OS_RESUME, BS_ON_ENTRY, soc_finalize, NULL); BOOT_STATE_INIT_ENTRY(BS_PAYLOAD_LOAD, BS_ON_EXIT, soc_finalize, NULL);