config SOC_INTEL_CANNONLAKE_BASE bool config SOC_INTEL_COFFEELAKE bool select SOC_INTEL_CANNONLAKE_BASE select FSP_USES_CB_STACK select HAVE_EXP_X86_64_SUPPORT select HAVE_INTEL_FSP_REPO select HECI_DISABLE_USING_SMM select SOC_INTEL_CONFIGURE_DDI_A_4_LANES config SOC_INTEL_WHISKEYLAKE bool select SOC_INTEL_CANNONLAKE_BASE select FSP_USES_CB_STACK select HAVE_INTEL_FSP_REPO select HECI_DISABLE_USING_SMM select SOC_INTEL_CONFIGURE_DDI_A_4_LANES config SOC_INTEL_COMETLAKE bool select SOC_INTEL_CANNONLAKE_BASE select FSP_USES_CB_STACK select HAVE_INTEL_FSP_REPO select PMC_IPC_ACPI_INTERFACE if DISABLE_HECI1_AT_PRE_BOOT select SOC_INTEL_CONFIGURE_DDI_A_4_LANES select SOC_INTEL_COMMON_BLOCK_HECI1_DISABLE_USING_PMC_IPC select SOC_INTEL_COMMON_BASECODE if SOC_INTEL_CSE_LITE_SKU config SOC_INTEL_COMETLAKE_1 bool select SOC_INTEL_COMETLAKE config SOC_INTEL_COMETLAKE_2 bool select SOC_INTEL_COMETLAKE config SOC_INTEL_COMETLAKE_S bool select SOC_INTEL_COMETLAKE config SOC_INTEL_COMETLAKE_V bool select SOC_INTEL_COMETLAKE config SOC_INTEL_CANNONLAKE_PCH_H bool if SOC_INTEL_CANNONLAKE_BASE config CPU_SPECIFIC_OPTIONS def_bool y select ACPI_INTEL_HARDWARE_SLEEP_VALUES select ACPI_NHLT select ARCH_X86 select BOOT_DEVICE_SUPPORTS_WRITES select CACHE_MRC_SETTINGS select CPU_INTEL_COMMON select CPU_INTEL_FIRMWARE_INTERFACE_TABLE select CPU_SUPPORTS_PM_TIMER_EMULATION select DISPLAY_FSP_VERSION_INFO select FSP_COMPRESS_FSP_S_LZMA select FSP_M_XIP select FSP_STATUS_GLOBAL_RESET_REQUIRED_3 select GENERIC_GPIO_LIB select HAVE_FSP_GOP select HAVE_FSP_LOGO_SUPPORT select HAVE_HYPERTHREADING select HAVE_SMI_HANDLER select IDT_IN_EVERY_STAGE select INTEL_CAR_NEM_ENHANCED select INTEL_DESCRIPTOR_MODE_CAPABLE select INTEL_GMA_ACPI select INTEL_GMA_ADD_VBT if RUN_FSP_GOP select MRC_SETTINGS_PROTECT select PARALLEL_MP_AP_WORK select PLATFORM_USES_FSP2_0 select PMC_GLOBAL_RESET_ENABLE_LOCK select SOC_INTEL_COMMON select SOC_INTEL_COMMON_ACPI_WAKE_SOURCE select SOC_INTEL_COMMON_BLOCK select SOC_INTEL_COMMON_BLOCK_ACPI select SOC_INTEL_COMMON_BLOCK_ACPI_CPPC select SOC_INTEL_COMMON_BLOCK_ACPI_GPIO select SOC_INTEL_COMMON_BLOCK_ACPI_LPIT select SOC_INTEL_COMMON_BLOCK_ACPI_PEP select SOC_INTEL_COMMON_BLOCK_CAR select SOC_INTEL_COMMON_BLOCK_CHIP_CONFIG select SOC_INTEL_COMMON_BLOCK_CNVI select SOC_INTEL_COMMON_BLOCK_CPU select SOC_INTEL_COMMON_BLOCK_CPU_MPINIT select SOC_INTEL_COMMON_BLOCK_CPU_SMMRELOCATE select SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT select SOC_INTEL_COMMON_BLOCK_GSPI_VERSION_2 select SOC_INTEL_COMMON_BLOCK_HDA select SOC_INTEL_COMMON_BLOCK_IRQ select SOC_INTEL_COMMON_BLOCK_POWER_LIMIT select SOC_INTEL_COMMON_BLOCK_SA select SOC_INTEL_COMMON_BLOCK_SCS select SOC_INTEL_COMMON_BLOCK_SMM select SOC_INTEL_COMMON_BLOCK_SMM_IO_TRAP select SOC_INTEL_COMMON_BLOCK_THERMAL_PCI_DEV select SOC_INTEL_COMMON_BLOCK_XHCI select SOC_INTEL_COMMON_BLOCK_XHCI_ELOG select SOC_INTEL_COMMON_FSP_RESET select SOC_INTEL_COMMON_NHLT select SOC_INTEL_COMMON_PCH_CLIENT select SOC_INTEL_COMMON_RESET select SOC_INTEL_MEM_MAPPED_PM_CONFIGURATION select SSE2 select SUPPORT_CPU_UCODE_IN_CBFS select TSC_MONOTONIC_TIMER select UDELAY_TSC select UDK_2017_BINDING select USE_FSP_NOTIFY_PHASE_POST_PCI_ENUM select USE_FSP_NOTIFY_PHASE_READY_TO_BOOT select USE_FSP_NOTIFY_PHASE_END_OF_FIRMWARE config MAX_CPUS int default 12 config DIMM_SPD_SIZE default 512 config DCACHE_RAM_BASE default 0xfef00000 config DCACHE_RAM_SIZE default 0x40000 help The size of the cache-as-ram region required during bootblock and/or romstage. config DCACHE_BSP_STACK_SIZE hex default 0x20400 if FSP_USES_CB_STACK default 0x4000 help The amount of anticipated stack usage in CAR by bootblock and other stages. In the case of FSP_USES_CB_STACK default value will be sum of FSP-M stack requirement (128KiB) and CB romstage stack requirement (~1KiB). config FSP_TEMP_RAM_SIZE hex depends on FSP_USES_CB_STACK default 0x10000 help The amount of anticipated heap usage in CAR by FSP. Refer to Platform FSP integration guide document to know the exact FSP requirement for Heap setup. config IFD_CHIPSET string default "cnl" config IED_REGION_SIZE hex default 0x400000 config HEAP_SIZE hex default 0x8000 config NHLT_DMIC_1CH_16B bool depends on ACPI_NHLT default n help Include DSP firmware settings for 1 channel 16B DMIC array. config NHLT_DMIC_2CH_16B bool depends on ACPI_NHLT default n help Include DSP firmware settings for 2 channel 16B DMIC array. config NHLT_DMIC_4CH_16B bool depends on ACPI_NHLT default n help Include DSP firmware settings for 4 channel 16B DMIC array. config NHLT_MAX98357 bool depends on ACPI_NHLT default n help Include DSP firmware settings for headset codec. config NHLT_MAX98373 bool depends on ACPI_NHLT default n help Include DSP firmware settings for headset codec. config NHLT_DA7219 bool depends on ACPI_NHLT default n help Include DSP firmware settings for headset codec. config MAX_ROOT_PORTS int default 24 if SOC_INTEL_CANNONLAKE_PCH_H default 16 config MAX_PCIE_CLOCK_SRC int default 16 if SOC_INTEL_CANNONLAKE_PCH_H default 6 config SMM_TSEG_SIZE hex default 0x800000 config SMM_RESERVED_SIZE hex default 0x200000 config PCR_BASE_ADDRESS hex default 0xfd000000 help This option allows you to select MMIO Base Address of sideband bus. config CPU_BCLK_MHZ int default 100 config SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ int default 120 config CPU_XTAL_HZ default 24000000 config DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ int default 216 config SOC_INTEL_COMMON_BLOCK_GSPI_MAX int default 3 config SOC_INTEL_I2C_DEV_MAX int default 4 if SOC_INTEL_CANNONLAKE_PCH_H default 6 config CONSOLE_UART_BASE_ADDRESS hex default 0xfe032000 depends on INTEL_LPSS_UART_FOR_CONSOLE # Clock divider parameters for 115200 baud rate config SOC_INTEL_COMMON_LPSS_UART_CLK_M_VAL hex default 0x30 config SOC_INTEL_COMMON_LPSS_UART_CLK_N_VAL hex default 0xc35 config VBOOT select VBOOT_MUST_REQUEST_DISPLAY select VBOOT_STARTS_IN_BOOTBLOCK select VBOOT_VBNV_CMOS select VBOOT_VBNV_CMOS_BACKUP_TO_FLASH config CBFS_SIZE default 0x200000 config MB_HAS_ACTIVE_HIGH_SD_PWR_ENABLE bool default n help Select this if the board has a SD_PWR_ENABLE pin connected to a active high sensing load switch to turn on power to the card reader. This will enable a workaround in ASL _PS3 and _PS0 methods to force SD_PWR_ENABLE to stay low in D3. config FSP_HEADER_PATH default "3rdparty/fsp/CoffeeLakeFspBinPkg/Include/" if SOC_INTEL_COFFEELAKE || SOC_INTEL_WHISKEYLAKE default "3rdparty/fsp/CometLakeFspBinPkg/CometLake1/Include/" if SOC_INTEL_COMETLAKE_1 default "3rdparty/fsp/CometLakeFspBinPkg/CometLake2/Include/" if SOC_INTEL_COMETLAKE_2 default "3rdparty/fsp/CometLakeFspBinPkg/CometLakeS/Include/" if SOC_INTEL_COMETLAKE_S default "3rdparty/fsp/CometLakeFspBinPkg/CometLakeV/Include/" if SOC_INTEL_COMETLAKE_V config FSP_FD_PATH default "3rdparty/fsp/CoffeeLakeFspBinPkg/Fsp.fd" if SOC_INTEL_COFFEELAKE || SOC_INTEL_WHISKEYLAKE default "3rdparty/fsp/CometLakeFspBinPkg/CometLake1/Fsp.fd" if SOC_INTEL_COMETLAKE_1 default "3rdparty/fsp/CometLakeFspBinPkg/CometLake2/Fsp.fd" if SOC_INTEL_COMETLAKE_2 default "3rdparty/fsp/CometLakeFspBinPkg/CometLakeS/Fsp.fd" if SOC_INTEL_COMETLAKE_S default "3rdparty/fsp/CometLakeFspBinPkg/CometLakeV/Fsp.fd" if SOC_INTEL_COMETLAKE_V config SOC_INTEL_CANNONLAKE_DEBUG_CONSENT int "Debug Consent for CNL" # USB DBC is more common for developers so make this default to 3 if # SOC_INTEL_DEBUG_CONSENT=y default 3 if SOC_INTEL_DEBUG_CONSENT default 0 help This is to control debug interface on SOC. Setting non-zero value will allow to use DBC or DCI to debug SOC. PlatformDebugConsent in FspmUpd.h has the details. config PRERAM_CBMEM_CONSOLE_SIZE hex default 0xe00 config INTEL_TXT_BIOSACM_ALIGNMENT hex default 0x40000 # 256KB config INTEL_GMA_BCLV_OFFSET default 0xc8258 config INTEL_GMA_BCLV_WIDTH default 32 config INTEL_GMA_BCLM_OFFSET default 0xc8254 config INTEL_GMA_BCLM_WIDTH default 32 endif