config SOC_INTEL_BROADWELL bool help Intel Broadwell and Haswell ULT support. if SOC_INTEL_BROADWELL config CPU_SPECIFIC_OPTIONS def_bool y select ARCH_BOOTBLOCK_X86_32 select ARCH_VERSTAGE_X86_32 select ARCH_ROMSTAGE_X86_32 select ARCH_RAMSTAGE_X86_32 select ALWAYS_LOAD_OPROM select BACKUP_DEFAULT_SMM_REGION select CACHE_MRC_BIN select CACHE_MRC_SETTINGS select MRC_SETTINGS_PROTECT select CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM select CPU_INTEL_FIRMWARE_INTERFACE_TABLE select SUPPORT_CPU_UCODE_IN_CBFS select HAVE_MONOTONIC_TIMER select HAVE_SMI_HANDLER select HAVE_HARD_RESET select HAVE_USBDEBUG select IOAPIC select MMCONF_SUPPORT select MMCONF_SUPPORT_DEFAULT select RELOCATABLE_MODULES select RELOCATABLE_RAMSTAGE select REG_SCRIPT select PARALLEL_MP select PCIEXP_ASPM select PCIEXP_COMMON_CLOCK select PCIEXP_CLK_PM select PCIEXP_L1_SUB_STATE select SMM_TSEG select SMP select SPI_FLASH select SSE2 select SUPPORT_CPU_UCODE_IN_CBFS select TSC_CONSTANT_RATE select TSC_SYNC_MFENCE select UDELAY_TSC select SOC_INTEL_COMMON config BOOTBLOCK_CPU_INIT string default "soc/intel/broadwell/bootblock/cpu.c" config BOOTBLOCK_NORTHBRIDGE_INIT string default "soc/intel/broadwell/bootblock/systemagent.c" config BOOTBLOCK_SOUTHBRIDGE_INIT string default "soc/intel/broadwell/bootblock/pch.c" config MMCONF_BASE_ADDRESS hex default 0xf0000000 config SERIAL_CPU_INIT bool default n config SMM_TSEG_SIZE hex default 0x800000 config IED_REGION_SIZE hex default 0x400000 config SMM_RESERVED_SIZE hex default 0x100000 config VGA_BIOS_ID string default "8086,0406" config CACHE_MRC_SIZE_KB int default 512 config DCACHE_RAM_BASE hex default 0xff7c0000 config DCACHE_RAM_SIZE hex default 0x10000 help The size of the cache-as-ram region required during bootblock and/or romstage. Note DCACHE_RAM_SIZE and DCACHE_RAM_MRC_VAR_SIZE must add up to a power of 2. config DCACHE_RAM_MRC_VAR_SIZE hex default 0x30000 help The amount of cache-as-ram region required by the reference code. config DCACHE_RAM_ROMSTAGE_STACK_SIZE hex default 0x2000 help The amount of anticipated stack usage from the data cache during pre-ram rom stage execution. config HAVE_MRC bool "Add a Memory Reference Code binary" help Select this option to add a Memory Reference Code binary to the resulting coreboot image. Note: Without this binary coreboot will not work if HAVE_MRC config MRC_FILE string "Intel Memory Reference Code path and filename" depends on HAVE_MRC default "mrc.bin" help The filename of the file to use as Memory Reference Code binary. config MRC_BIN_ADDRESS hex default 0xfffa0000 config CACHE_MRC_SETTINGS bool "Save cached MRC settings" default y endif # HAVE_MRC config PRE_GRAPHICS_DELAY int "Graphics initialization delay in ms" default 0 help On some systems, coreboot boots so fast that connected monitors (mostly TVs) won't be able to wake up fast enough to talk to the VBIOS. On those systems we need to wait for a bit before executing the VBIOS. config RESET_ON_INVALID_RAMSTAGE_CACHE bool "Reset the system on S3 wake when ramstage cache invalid." default n depends on RELOCATABLE_RAMSTAGE help The romstage code caches the loaded ramstage program in SMM space. On S3 wake the romstage will copy over a fresh ramstage that was cached in the SMM space. This option determines the action to take when the ramstage cache is invalid. If selected the system will reset otherwise the ramstage will be reloaded from cbfs. config INTEL_PCH_UART_CONSOLE bool "Use Serial IO UART for console" default n select CONSOLE_SERIAL8250MEM config INTEL_PCH_UART_CONSOLE_NUMBER hex "Serial IO UART number to use for console" default "0x0" depends on INTEL_PCH_UART_CONSOLE config TTYS0_BASE hex default 0xd6000000 depends on INTEL_PCH_UART_CONSOLE config EHCI_BAR hex default 0xd8000000 config EHCI_DEBUG_OFFSET hex default 0xa0 config SERIRQ_CONTINUOUS_MODE bool default y help If you set this option to y, the serial IRQ machine will be operated in continuous mode. config HAVE_REFCODE_BLOB depends on ARCH_X86 bool "An external reference code blob should be put into cbfs." default n help The reference code blob will be placed into cbfs. if HAVE_REFCODE_BLOB config REFCODE_BLOB_FILE string "Path and filename to reference code blob." default "refcode.elf" help The path and filename to the file to be added to cbfs. endif # HAVE_REFCODE_BLOB config HAVE_ME_BIN bool "Add Intel Management Engine firmware" default y help The Intel processor in the selected system requires a special firmware for an integrated controller called Management Engine (ME). The ME firmware might be provided in coreboot's 3rdparty/blobs repository. If not and if you don't have the firmware elsewhere, you can still build coreboot without it. In this case however, you'll have to make sure that you don't overwrite your ME firmware on your flash ROM. config ME_BIN_PATH string "Path to management engine firmware" depends on HAVE_ME_BIN default "3rdparty/blobs/mainboard/$(MAINBOARDDIR)/me.bin" config HAVE_IFD_BIN bool "Use Intel Firmware Descriptor from existing binary" default n config BUILD_WITH_FAKE_IFD bool "Build with a fake IFD" default y if !HAVE_IFD_BIN help If you don't have an Intel Firmware Descriptor (ifd.bin) for your board, you can select this option and coreboot will build without it. Though, the resulting coreboot.rom will not contain all parts required to get coreboot running on your board. You can however write only the BIOS section to your board's flash ROM and keep the other sections untouched. Unfortunately the current version of flashrom doesn't support this yet. But there is a patch pending [1]. WARNING: Never write a complete coreboot.rom to your flash ROM if it was built with a fake IFD. It just won't work. [1] http://www.flashrom.org/pipermail/flashrom/2013-June/011083.html config IFD_BIOS_SECTION depends on BUILD_WITH_FAKE_IFD string default "" config IFD_ME_SECTION depends on BUILD_WITH_FAKE_IFD string default "" config IFD_PLATFORM_SECTION depends on BUILD_WITH_FAKE_IFD string default "" config IFD_BIN_PATH string "Path to intel firmware descriptor" depends on !BUILD_WITH_FAKE_IFD default "3rdparty/blobs/mainboard/$(MAINBOARDDIR)/descriptor.bin" config LOCK_MANAGEMENT_ENGINE bool "Lock Management Engine section" default n help The Intel Management Engine supports preventing write accesses from the host to the Management Engine section in the firmware descriptor. If the ME section is locked, it can only be overwritten with an external SPI flash programmer. You will want this if you want to increase security of your ROM image once you are sure that the ME firmware is no longer going to change. If unsure, say N. endif