/* SPDX-License-Identifier: GPL-2.0-only */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include asmlinkage void bootblock_c_entry(uint64_t base_timestamp) { /* Call lib/bootblock.c main */ bootblock_main_with_basetime(base_timestamp); } static void program_base_addresses(void) { uint32_t reg; const uint32_t lpc_dev = PCI_DEV(0, LPC_DEV, LPC_FUNC); /* Memory Mapped IO registers. */ reg = PMC_BASE_ADDRESS | 2; pci_write_config32(lpc_dev, PBASE, reg); reg = IO_BASE_ADDRESS | 2; pci_write_config32(lpc_dev, IOBASE, reg); reg = ILB_BASE_ADDRESS | 2; pci_write_config32(lpc_dev, IBASE, reg); reg = SPI_BASE_ADDRESS | 2; pci_write_config32(lpc_dev, SBASE, reg); reg = MPHY_BASE_ADDRESS | 2; pci_write_config32(lpc_dev, MPBASE, reg); reg = PUNIT_BASE_ADDRESS | 2; pci_write_config32(lpc_dev, PUBASE, reg); reg = RCBA_BASE_ADDRESS | 1; pci_write_config32(lpc_dev, RCBA, reg); /* IO Port Registers. */ reg = ACPI_BASE_ADDRESS | 2; pci_write_config32(lpc_dev, ABASE, reg); reg = GPIO_BASE_ADDRESS | 2; pci_write_config32(lpc_dev, GBASE, reg); } static void tco_disable(void) { uint32_t reg; reg = inl(ACPI_BASE_ADDRESS + TCO1_CNT); reg |= TCO_TMR_HALT; outl(reg, ACPI_BASE_ADDRESS + TCO1_CNT); } static void spi_init(void) { void *scs = (void *)(SPI_BASE_ADDRESS + SCS); void *bcr = (void *)(SPI_BASE_ADDRESS + BCR); uint32_t reg; /* Disable generating SMI when setting WPD bit. */ write32(scs, read32(scs) & ~SMIWPEN); /* * Enable caching and prefetching in the SPI controller. Disable * the SMM-only BIOS write and set WPD bit. */ reg = (read32(bcr) & ~SRC_MASK) | SRC_CACHE_PREFETCH | BCR_WPD; reg &= ~EISS; write32(bcr, reg); } static void soc_rtc_init(void) { int rtc_failed = rtc_failure(); if (rtc_failed) printk(BIOS_ERR, "RTC Failure detected. Resetting date to %x/%x/%x%x\n", coreboot_build_date.month, coreboot_build_date.day, coreboot_build_date.century, coreboot_build_date.year); cmos_init(rtc_failed); } static void setup_mmconfig(void) { uint32_t reg; /* * Set up the MMCONF range. The register lives in the BUNIT. The IO variant of the * config access needs to be used initially to properly configure as the IOSF access * registers live in PCI config space. */ reg = 0; /* Clear the extended register. */ pci_io_write_config32(IOSF_PCI_DEV, MCRX_REG, reg); reg = CONFIG_ECAM_MMCONF_BASE_ADDRESS | 1; pci_io_write_config32(IOSF_PCI_DEV, MDR_REG, reg); reg = IOSF_OPCODE(IOSF_OP_WRITE_BUNIT) | IOSF_PORT(IOSF_PORT_BUNIT) | IOSF_REG(BUNIT_MMCONF_REG) | IOSF_BYTE_EN; pci_io_write_config32(IOSF_PCI_DEV, MCR_REG, reg); } void bootblock_soc_early_init(void) { /* Allow memory-mapped PCI config access */ setup_mmconfig(); /* Early chipset initialization */ program_base_addresses(); tco_disable(); } void bootblock_soc_init(void) { report_fsp_output(); /* Continue chipset initialization */ soc_rtc_init(); set_max_freq(); spi_init(); lpc_init(); }