/* SPDX-License-Identifier: GPL-2.0-or-later */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "chip.h" #define CSTATE_RES(address_space, width, offset, address) \ { \ .space_id = address_space, \ .bit_width = width, \ .bit_offset = offset, \ .addrl = address, \ } static const acpi_cstate_t cstate_map[] = { { /* C1 */ .ctype = 1, /* ACPI C1 */ .latency = 1, .power = 1000, .resource = CSTATE_RES(ACPI_ADDRESS_SPACE_FIXED, 0, 0, 0), }, { .ctype = 2, /* ACPI C2 */ .latency = 50, .power = 10, .resource = CSTATE_RES(ACPI_ADDRESS_SPACE_IO, 8, 0, 0x415), }, { .ctype = 3, /* ACPI C3 */ .latency = 150, .power = 10, .resource = CSTATE_RES(ACPI_ADDRESS_SPACE_IO, 8, 0, 0x419), } }; uint32_t soc_read_sci_irq_select(void) { return read32p(soc_read_pmc_base() + IRQ_REG); } void soc_write_sci_irq_select(uint32_t scis) { write32p(soc_read_pmc_base() + IRQ_REG, scis); } const acpi_cstate_t *soc_get_cstate_map(size_t *entries) { *entries = ARRAY_SIZE(cstate_map); return cstate_map; } void soc_fill_gnvs(struct global_nvs *gnvs) { struct soc_intel_apollolake_config *cfg; cfg = config_of_soc(); /* Enable DPTF based on mainboard configuration */ gnvs->dpte = cfg->dptf_enable; /* Assign address of PERST_0 if GPIO is defined in devicetree */ if (cfg->prt0_gpio != GPIO_PRT0_UDEF) gnvs->prt0 = (uintptr_t)gpio_dwx_address(cfg->prt0_gpio); /* Get sdcard cd GPIO portid if GPIO is defined in devicetree. * Get offset of sdcard cd pin. */ if (cfg->sdcard_cd_gpio) { gnvs->scdp = gpio_get_pad_portid(cfg->sdcard_cd_gpio); gnvs->scdo = gpio_acpi_pin(cfg->sdcard_cd_gpio); } } int soc_madt_sci_irq_polarity(int sci) { return MP_IRQ_POLARITY_LOW; } void soc_fill_fadt(acpi_fadt_t *fadt) { const struct soc_intel_apollolake_config *cfg; cfg = config_of_soc(); fadt->pm_tmr_blk = ACPI_BASE_ADDRESS + PM1_TMR; fadt->pm_tmr_len = 4; fill_fadt_extended_pm_io(fadt); fadt->iapc_boot_arch = ACPI_FADT_LEGACY_DEVICES | ACPI_FADT_8042; if (cfg->lpss_s0ix_enable) fadt->flags |= ACPI_FADT_LOW_PWR_IDLE_S0; } static unsigned long soc_fill_dmar(unsigned long current) { uint64_t gfxvtbar = MCHBAR64(GFXVTBAR) & VTBAR_MASK; uint64_t defvtbar = MCHBAR64(DEFVTBAR) & VTBAR_MASK; bool gfxvten = MCHBAR32(GFXVTBAR) & VTBAR_ENABLED; bool defvten = MCHBAR32(DEFVTBAR) & VTBAR_ENABLED; unsigned long tmp; /* IGD has to be enabled, GFXVTBAR set and enabled. */ const bool emit_igd = is_devfn_enabled(SA_DEVFN_IGD) && gfxvtbar && gfxvten; /* First, add DRHD entries */ if (emit_igd) { tmp = current; current += acpi_create_dmar_drhd_4k(current, 0, 0, gfxvtbar); current += acpi_create_dmar_ds_pci(current, 0, 2, 0); acpi_dmar_drhd_fixup(tmp, current); } /* DEFVTBAR has to be set and enabled. */ if (defvtbar && defvten) { tmp = current; union p2sb_bdf ibdf = p2sb_get_ioapic_bdf(); union p2sb_bdf hbdf = p2sb_get_hpet_bdf(); p2sb_hide(); current += acpi_create_dmar_drhd_4k(current, DRHD_INCLUDE_PCI_ALL, 0, defvtbar); current += acpi_create_dmar_ds_ioapic_from_hw(current, IO_APIC_ADDR, ibdf.bus, ibdf.dev, ibdf.fn); current += acpi_create_dmar_ds_msi_hpet(current, 0, hbdf.bus, hbdf.dev, hbdf.fn); acpi_dmar_drhd_fixup(tmp, current); } /* Then, add RMRR entries after all DRHD entries */ if (emit_igd) { tmp = current; current += acpi_create_dmar_rmrr(current, 0, sa_get_gsm_base(), sa_get_tolud_base() - 1); current += acpi_create_dmar_ds_pci(current, 0, 2, 0); acpi_dmar_rmrr_fixup(tmp, current); } return current; } unsigned long sa_write_acpi_tables(const struct device *const dev, unsigned long current, struct acpi_rsdp *const rsdp) { acpi_dmar_t *const dmar = (acpi_dmar_t *)current; /* Create DMAR table only if virtualization is enabled. Due to some * constraints on Apollo Lake SoC (some stepping affected), VTD could * not be enabled together with IPU. Doing so will override and disable * VTD while leaving CAPID0_A still reporting that VTD is available. * As in this case FSP will lock VTD to disabled state, we need to make * sure that DMAR table generation only happens when at least DEFVTBAR * is enabled. Otherwise the DMAR header will be generated while the * content of the table will be missing. */ if ((pci_read_config32(dev, CAPID0_A) & VTD_DISABLE) || !(MCHBAR32(DEFVTBAR) & VTBAR_ENABLED)) return current; printk(BIOS_DEBUG, "ACPI: * DMAR\n"); acpi_create_dmar(dmar, DMAR_INTR_REMAP, soc_fill_dmar); current += dmar->header.length; current = acpi_align_current(current); acpi_add_table(rsdp, dmar); current = acpi_align_current(current); return current; } void soc_power_states_generation(int core_id, int cores_per_package) { /* Generate P-state tables */ generate_p_state_entries(core_id, cores_per_package); /* Generate T-state tables */ generate_t_state_entries(core_id, cores_per_package); } static void acpigen_soc_get_dw0_in_local5(uintptr_t addr) { /* * Store (\_SB.GPC0 (addr), Local5) * \_SB.GPC0 is used to read cfg0 value from dw0. It is defined in * gpiolib.asl. */ acpigen_write_store(); acpigen_emit_namestring("\\_SB.GPC0"); acpigen_write_integer(addr); acpigen_emit_byte(LOCAL5_OP); } static int acpigen_soc_get_gpio_val(unsigned int gpio_num, uint32_t mask) { assert(gpio_num < TOTAL_PADS); uintptr_t addr = (uintptr_t)gpio_dwx_address(gpio_num); acpigen_soc_get_dw0_in_local5(addr); /* If (And (Local5, mask)) */ acpigen_write_if_and(LOCAL5_OP, mask); /* Store (One, Local0) */ acpigen_write_store_ops(ONE_OP, LOCAL0_OP); /* Else */ acpigen_write_else(); /* Store (Zero, Local0) */ acpigen_write_store_ops(ZERO_OP, LOCAL0_OP); acpigen_pop_len(); /* Else */ return 0; } static int acpigen_soc_set_gpio_val(unsigned int gpio_num, uint32_t val) { assert(gpio_num < TOTAL_PADS); uintptr_t addr = (uintptr_t)gpio_dwx_address(gpio_num); acpigen_soc_get_dw0_in_local5(addr); if (val) { /* Or (Local5, PAD_CFG0_TX_STATE, Local5) */ acpigen_write_or(LOCAL5_OP, PAD_CFG0_TX_STATE, LOCAL5_OP); } else { /* Not (PAD_CFG0_TX_STATE, Local6) */ acpigen_write_not(PAD_CFG0_TX_STATE, LOCAL6_OP); /* And (Local5, Local6, Local5) */ acpigen_write_and(LOCAL5_OP, LOCAL6_OP, LOCAL5_OP); } /* * \_SB.SPC0 (addr, Local5) * \_SB.SPC0 is used to write cfg0 value in dw0. It is defined in * gpiolib.asl. */ acpigen_emit_namestring("\\_SB.SPC0"); acpigen_write_integer(addr); acpigen_emit_byte(LOCAL5_OP); return 0; } int acpigen_soc_read_rx_gpio(unsigned int gpio_num) { return acpigen_soc_get_gpio_val(gpio_num, PAD_CFG0_RX_STATE); } int acpigen_soc_get_tx_gpio(unsigned int gpio_num) { return acpigen_soc_get_gpio_val(gpio_num, PAD_CFG0_TX_STATE); } int acpigen_soc_set_tx_gpio(unsigned int gpio_num) { return acpigen_soc_set_gpio_val(gpio_num, 1); } int acpigen_soc_clear_tx_gpio(unsigned int gpio_num) { return acpigen_soc_set_gpio_val(gpio_num, 0); }