/* SPDX-License-Identifier: GPL-2.0-or-later */ #include /* * Type C Subsystem(TCSS) topology provides Runtime D3 support for USB host controller(xHCI), * USB device controller(xDCI), Thunderbolt DMA devices and Thunderbolt PCIe controllers. * PCIe RP0/RP1 is grouped with DMA0 and PCIe RP2/RP3 is grouped with DMA1. */ #define TCSS_TBT_PCIE0_RP0 0 #define TCSS_TBT_PCIE0_RP1 1 #define TCSS_TBT_PCIE0_RP2 2 #define TCSS_TBT_PCIE0_RP3 3 #define TCSS_XHCI 4 #define TCSS_XDCI 5 #define TCSS_DMA0 6 #define TCSS_DMA1 7 /* * MAILBOX_BIOS_CMD_TCSS_DEVEN_INTERFACE * Command code 0x15 * Description: Gateway command for handling TCSS DEVEN clear/restore. * Field PARAM1[15:8] of the _INTERFACE register is used in this command to select from * a pre-defined set of subcommands. */ #define MAILBOX_BIOS_CMD_TCSS_DEVEN_INTERFACE 0x00000015 #define TCSS_DEVEN_MAILBOX_SUBCMD_GET_STATUS 0 /* Sub-command 0 */ #define TCSS_DEVEN_MAILBOX_SUBCMD_TCSS_CHANGE_REQ 1 /* Sub-command 1 */ #define TCSS_IOM_ACK_TIMEOUT_IN_MS 100 #define MCHBAR_TCSS_DEVEN_OFFSET 0x7090 #define REVISION_ID 1 #define UNRECOGNIZED_UUID 0x4 #define UNRECOGNIZED_REVISION 0x8 #define USB_TUNNELING 0x1 #define DISPLAY_PORT_TUNNELING 0x2 #define PCIE_TUNNELING 0x4 #define INTER_DOMAIN_USB4_INTERNET_PROTOCOL 0x8 Scope (\_SB) { /* Device base address */ Method (BASE, 1) { Local0 = Arg0 & 0x7 /* Function number */ Local1 = (Arg0 >> 16) & 0x1F /* Device number */ Local2 = (Local0 << 12) + (Local1 << 15) Local3 = \_SB.PCI0.GPCB() + Local2 Return (Local3) } /* * Define PCH ACPIBASE IO as an ACPI operating region. The base address can be * found in Device 31, Function 2, Offset 40h. */ OperationRegion (PMIO, SystemIO, ACPI_BASE_ADDRESS, 0x80) Field (PMIO, ByteAcc, NoLock, Preserve) { Offset(0x6C), /* 0x6C, General Purpose Event 0 Status [127:96] */ , 19, CPWS, 1, /* CPU WAKE STATUS */ Offset(0x7C), /* 0x7C, General Purpose Event 0 Enable [127:96] */ , 19, CPWE, 1 /* CPU WAKE EN */ } Name (C2PW, 0) /* Set default value to 0. */ /* * C2PM (CPU to PCH Method) * * This object is Enable/Disable GPE_CPU_WAKE_EN. * Arguments: (4) * Arg0 - An Integer containing the device wake capability * Arg1 - An Integer containing the target system state * Arg2 - An Integer containing the target device state * Arg3 - An Integer containing the request device type * Return Value: * return 0 */ Method (C2PM, 4, NotSerialized) { Local0 = 1 << Arg3 /* This method is used to enable/disable wake from Tcss Device (WKEN). */ If (Arg0 && Arg1) { /* If entering Sx and enabling wake, need to enable WAKE capability. */ If (CPWE == 0) { /* If CPU WAKE EN is not set, Set it. */ If (CPWS) { /* If CPU WAKE STATUS is set, Clear it. */ /* Clear CPU WAKE STATUS by writing 1. */ CPWS = 1 } CPWE = 1 /* Set CPU WAKE EN by writing 1. */ } If ((C2PW & Local0) == 0) { /* Set Corresponding Device En BIT in C2PW. */ C2PW |= Local0 } } Else { /* If Staying in S0 or Disabling Wake. */ If (Arg0 || Arg2) { /* Check if Exiting D0 and arming for wake. */ /* If CPU WAKE EN is not set, Set it. */ If (CPWE == 0) { /* If CPU WAKE STATUS is set, Clear it. */ If (CPWS) { /* Clear CPU WAKE STATUS by writing 1. */ CPWS = 1 } CPWE = 1 /* Set CPU WAKE EN by writing 1. */ } If ((C2PW & Local0) == 0) { /* Set Corresponding Device En BIT in C2PW. */ C2PW |= Local0 } } Else { /* * Disable runtime PME, either because staying in D0 or * disabling wake. */ If ((C2PW & Local0) != 0) { /* * Clear Corresponding Device En BIT in C2PW. */ C2PW &= ~Local0 } If ((CPWE != 0) && (C2PW == 0)) { /* * If CPU WAKE EN is set, Clear it. Clear CPU WAKE EN * by writing 0. */ CPWE = 0 } } } Return (0) } Method (_OSC, 4, Serialized) { CreateDWordField (Arg3, 0, CDW1) If (Arg0 == ToUUID("0811B06E-4A27-44F9-8D60-3CBBC22E7B48")) { /* Platform-Wide _OSC Capabilities * Arg0: UUID = {0811B06E-4A27-44F9-8D60-3CBBC22E7B48} * Arg1: Revision ID = 1 * Arg2: Count of entries (DWORD) in Arge3 (Integer): 3 * Arg3: DWORD capabilities buffer: * First DWORD: The standard definition bits are used to return errors. * Second DWORD: See ACPI specification Platform-Wide _OSC Capabilities * DWORD2 table for Bits 0-17. Bit 18 is newly defined as native USB4 * support. The OS sets this bit to indicate support for an OSPM-native * USB4 Connection Manager which handles USB4 connection events and * link management. */ If (Arg1 != REVISION_ID) { CDW1 |= UNRECOGNIZED_REVISION } Return (Arg3) } ElseIf (Arg0 == ToUUID("23A0D13A-26AB-486C-9C5F-0FFA525A575A")) { /* * Operating System Capabilities for USB4 * Arg0: UUID = {23A0D13A-26AB-486C-9C5F-0FFA525A575A} * Arg1: Revision ID = 1 * Arg2: Count of entries (DWORD) in Arg3 (Integer): 3 * Arg3: DWORD capabilities buffer: * First DWORD: The standard definition bits are used to return errors. * Second DWORD: OSPM support field for USB4, bits [31:0] reserved. * Third DWORD: OSPM control field for USB4. * bit 0: USB tunneling * bit 1: DisplayPort tunneling * bit 2: PCIe tunneling * bit 3: Inter-domain USB4 internet protocol * bit 31:4: reserved * Return: The platform acknowledges the capabilities buffer by * returning a buffer of DWORD of the same length. Masked/Cleared bits * in the control field indicate that the platform does not permit OSPM * control of the respectively capabilities or features. */ CreateDWordField (Arg3, 8, CDW3) Local0 = CDW3 If (Arg1 != REVISION_ID) { CDW1 |= UNRECOGNIZED_REVISION Return (Arg3) } Local0 |= USB_TUNNELING | DISPLAY_PORT_TUNNELING | PCIE_TUNNELING | INTER_DOMAIN_USB4_INTERNET_PROTOCOL CDW3 = Local0 Return (Arg3) } Else { CDW1 |= UNRECOGNIZED_UUID Return (Arg3) } } } Scope (_GPE) { /* PCI Express Hot-Plug wake event */ Method (_L61, 0, NotSerialized) { /* * Delay for 100ms to meet the timing requirements of the PCI Express Base * Specification, Revision 1.0A, Section 6.6 ("...software must wait at least * 100ms from the end of reset of one or more device before it is permitted * to issue Configuration Requests to those devices"). */ Sleep (100) If (CondRefOf (\_SB.PCI0.TXHC)) { /* Invoke PCIe root ports wake event handler */ \_SB.PCI0.TRP0.HPEV() \_SB.PCI0.TRP1.HPEV() \_SB.PCI0.TRP2.HPEV() \_SB.PCI0.TRP3.HPEV() } /* Check Root Port 0 for a Hot Plug Event if the port is enabled */ If (((\_SB.PCI0.TRP0.VDID != 0xFFFFFFFF) && \_SB.PCI0.TRP0.HPSX)) { If (\_SB.PCI0.TRP0.PDCX) { /* Clear all status bits */ \_SB.PCI0.TRP0.PDCX = 1 \_SB.PCI0.TRP0.HPSX = 1 /* * Intercept Presence Detect Changed interrupt and make sure * the L0s is disabled on empty slots. */ If (!\_SB.PCI0.TRP0.PDSX) { /* * The PCIe slot is empty, so disable L0s on hot unplug. */ \_SB.PCI0.TRP0.L0SE = 0 } /* Performs proper notification to the OS. */ Notify (\_SB.PCI0.TRP0, 0) } Else { /* False event. Clear Hot-Plug status, then exit. */ \_SB.PCI0.TRP0.HPSX = 1 } } /* Check Root Port 1 for a Hot Plug Event if the port is enabled */ If (((\_SB.PCI0.TRP1.VDID != 0xFFFFFFFF) && \_SB.PCI0.TRP1.HPSX)) { If (\_SB.PCI0.TRP1.PDCX) { \_SB.PCI0.TRP1.PDCX = 1 \_SB.PCI0.TRP1.HPSX = 1 If (!\_SB.PCI0.TRP1.PDSX) { \_SB.PCI0.TRP1.L0SE = 0 } Notify (\_SB.PCI0.TRP1, 0) } Else { \_SB.PCI0.TRP1.HPSX = 1 } } /* Check Root Port 2 for a Hot Plug Event if the port is enabled */ If (((\_SB.PCI0.TRP2.VDID != 0xFFFFFFFF) && \_SB.PCI0.TRP2.HPSX)) { If (\_SB.PCI0.TRP2.PDCX) { \_SB.PCI0.TRP2.PDCX = 1 \_SB.PCI0.TRP2.HPSX = 1 If (!\_SB.PCI0.TRP2.PDSX) { \_SB.PCI0.TRP2.L0SE = 0 } Notify (\_SB.PCI0.TRP2, 0) } Else { \_SB.PCI0.TRP2.HPSX = 1 } } /* Check Root Port 3 for a Hot Plug Event if the port is enabled */ If (((\_SB.PCI0.TRP3.VDID != 0xFFFFFFFF) && \_SB.PCI0.TRP3.HPSX)) { If (\_SB.PCI0.TRP3.PDCX) { \_SB.PCI0.TRP3.PDCX = 1 \_SB.PCI0.TRP3.HPSX = 1 If (!\_SB.PCI0.TRP3.PDSX) { \_SB.PCI0.TRP3.L0SE = 0 } Notify (\_SB.PCI0.TRP3, 0) } Else { \_SB.PCI0.TRP3.HPSX = 1 } } } /* PCI Express power management event */ Method (_L69, 0, Serialized) { If (CondRefOf (\_SB.PCI0.TXHC)) { If (\_SB.PCI0.TRP0.HPME() == 1) { Notify (\_SB.PCI0.TDM0, 0x2) Notify (\_SB.PCI0.TRP0, 0x2) } If (\_SB.PCI0.TRP1.HPME() == 1) { Notify (\_SB.PCI0.TDM0, 0x2) Notify (\_SB.PCI0.TRP1, 0x2) } If (\_SB.PCI0.TRP2.HPME() == 1) { Notify (\_SB.PCI0.TDM1, 0x2) Notify (\_SB.PCI0.TRP2, 0x2) } If (\_SB.PCI0.TRP3.HPME() == 1) { Notify (\_SB.PCI0.TDM1, 0x2) Notify (\_SB.PCI0.TRP3, 0x2) } } /* Invoke PCIe root ports power management status handler */ \_SB.PCI0.TRP0.HPME() \_SB.PCI0.TRP1.HPME() \_SB.PCI0.TRP2.HPME() \_SB.PCI0.TRP3.HPME() } } Scope (\_SB.PCI0) { Device (IOM) { Name (_HID, "INTC1079") Name (_DDN, "Intel(R) Alder Lake Input Output Manager(IOM) driver") /* IOM preserved MMIO range from 0xFBC10000 to 0xFBC11600. */ Name (_CRS, ResourceTemplate () { Memory32Fixed (ReadWrite, IOM_BASE_ADDRESS, IOM_BASE_SIZE) }) } /* * Operation region defined to access the TCSS_DEVEN. Get the MCHBAR in offset * 0x48 in B0:D0:F0. TCSS device enable base address is in offset 0x7090 of MCHBAR. */ OperationRegion (TDEN, SystemMemory, (GMHB() + MCHBAR_TCSS_DEVEN_OFFSET), 0x4) Field (TDEN, ByteAcc, NoLock, Preserve) { TRE0, 1, /* PCIE0_EN */ TRE1, 1, /* PCIE1_EN */ TRE2, 1, /* PCIE2_EN */ TRE3, 1, /* PCIE3_EN */ , 4, THCE, 1, /* XHCI_EN */ TDCE, 1, /* XDCI_EN */ DME0, 1, /* TBT_DMA0_EN */ DME1, 1, /* TBT_DMA1_EN */ , 20 } /* * Operation region defined to access the IOM REGBAR. Get the MCHBAR in offset * 0x48 in B0:D0:F0. REGBAR Base address is in offset 0x7110 of MCHBAR. */ OperationRegion (MBAR, SystemMemory, (GMHB() + 0x7100), 0x1000) Field (MBAR, ByteAcc, NoLock, Preserve) { Offset(0x10), RBAR, 64 /* RegBar, offset 0x7110 in MCHBAR */ } Field (MBAR, DWordAcc, NoLock, Preserve) { Offset(0x304), /* PRIMDN_MASK1_0_0_0_MCHBAR_IMPH, offset 0x7404 */ , 31, TCD3, 1 /* [31:31] TCSS IN D3 bit */ } /* * Operation region defined to access the pCode mailbox interface. Get the MCHBAR * in offset 0x48 in B0:D0:F0. MMIO address is in offset 0x5DA0 of MCHBAR. */ OperationRegion (PBAR, SystemMemory, (GMHB() + 0x5DA0), 0x08) Field (PBAR, DWordAcc, NoLock, Preserve) { PMBD, 32, /* pCode MailBox Data, offset 0x5DA0 in MCHBAR */ PMBC, 8, /* pCode MailBox Command, [7:0] of offset 0x5DA4 in MCHBAR */ PSCM, 8, /* pCode MailBox Sub-Command, [15:8] of offset 0x5DA4 in MCHBAR */ , 15, /* Reserved */ PMBR, 1 /* pCode MailBox RunBit, [31:31] of offset 0x5DA4 in MCHBAR */ } /* * Poll pCode MailBox Ready * * Return 0xFF - Timeout * 0x00 - Ready */ Method (PMBY, 0) { Local0 = 0 While (PMBR && (Local0 < 1000)) { Local0++ Stall (1) } If (Local0 == 1000) { Printf("Timeout occurred.") Return (0xFF) } Return (0) } /* * Method to send pCode MailBox command TCSS_DEVEN_MAILBOX_SUBCMD_GET_STATUS * * Result will be updated in DATA[1:0] * DATA[0:0] TCSS_DEVEN_CURRENT_STATE: * 0 - TCSS Deven in normal state. * 1 - TCSS Deven is cleared by BIOS Mailbox request. * DATA[1:1] TCSS_DEVEN_REQUEST_STATUS: * 0 - IDLE. TCSS DEVEN has reached its final requested state. * 1 - In Progress. TCSS DEVEN is currently in progress of switching state * according to given request (bit 0 reflects source state). * * Return 0x00 - TCSS Deven in normal state * 0x01 - TCSS Deven is cleared by BIOS Mailbox request * 0x1x - TCSS Deven is in progress of switching state according to given request * 0xFE - Command timeout * 0xFF - Command corrupt */ Method (DSGS, 0) { If ((PMBY () == 0)) { PMBC = MAILBOX_BIOS_CMD_TCSS_DEVEN_INTERFACE PSCM = TCSS_DEVEN_MAILBOX_SUBCMD_GET_STATUS PMBR = 1 If (PMBY () == 0) { Local0 = PMBD Local1 = PMBC Stall (10) If ((Local0 != PMBD) || (Local1 != PMBC)) { Printf("pCode MailBox is corrupt.") Return (0xFF) } Return (Local0) } Else { Printf("pCode MailBox is not ready.") Return (0xFE) } } Else { Printf("pCode MailBox is not ready.") Return (0xFE) } } /* * Method to send pCode MailBox command TCSS_DEVEN_MAILBOX_SUBCMD_TCSS_CHANGE_REQ * * Arg0 : 0 - Restore to previously saved value of TCSS DEVEN * 1 - Save current TCSS DEVEN value and clear it * * Return 0x00 - MAILBOX_BIOS_CMD_CLEAR_TCSS_DEVEN command completed * 0xFD - Input argument is invalid * 0xFE - Command timeout * 0xFF - Command corrupt */ Method (DSCR, 1) { If (Arg0 > 1) { Printf("pCode MailBox is corrupt.") Return (0xFD) } If ((PMBY () == 0)) { PMBC = MAILBOX_BIOS_CMD_TCSS_DEVEN_INTERFACE PSCM = TCSS_DEVEN_MAILBOX_SUBCMD_TCSS_CHANGE_REQ PMBD = Arg0 PMBR = 1 If ((PMBY () == 0)) { Local0 = PMBD Local1 = PMBC Stall (10) If ((Local0 != PMBD) || (Local1 != PMBC)) { Printf("pCode MailBox is corrupt.") Return (0xFF) } /* Poll TCSS_DEVEN_REQUEST_STATUS, timeout value is 10ms. */ Local0 = 0 While ((DSGS () & 0x10) && (Local0 < 100)) { Stall (100) Local0++ } If (Local0 == 100) { Printf("pCode MailBox is not ready.") Return (0xFE) } Else { Return (0x00) } } Else { Printf("pCode MailBox is not ready.") Return (0xFE) } } Else { Printf("pCode MailBox is not ready.") Return (0xFE) } } /* * IOM REG BAR Base address is in offset 0x7110 in MCHBAR. */ Method (IOMA, 0) { Return (^RBAR & ~0x1) } /* * From RegBar Base, IOM_TypeC_SW_configuration_1 is in offset 0xC10040, where * 0x40 is the register offset. */ OperationRegion (IOMR, SystemMemory, (IOMA() + 0xC10000), 0x100) Field (IOMR, DWordAcc, NoLock, Preserve) { Offset(0x40), , 15, TD3C, 1, /* [15:15] Type C D3 cold bit */ TACK, 1, /* [16:16] IOM Acknowledge bit */ DPOF, 1, /* [17:17] Set 1 to indicate IOM, all the */ /* display is OFF, clear otherwise */ Offset(0x70), /* Physical addr is offset 0x70. */ IMCD, 32, /* R_SA_IOM_BIOS_MAIL_BOX_CMD */ IMDA, 32 /* R_SA_IOM_BIOS_MAIL_BOX_DATA */ } /* * TBT Group0 ON method */ Method (TG0N, 0) { If (\_SB.PCI0.TDM0.VDID == 0xFFFFFFFF) { Printf("TDM0 does not exist.") } Else { If (\_SB.PCI0.TDM0.STAT == 0) { /* DMA0 is in D3Cold early. */ \_SB.PCI0.TDM0.D3CX() /* RTD3 Exit */ Printf("Bring TBT RPs out of D3Code.") If (\_SB.PCI0.TRP0.VDID != 0xFFFFFFFF) { /* RP0 D3 cold exit. */ \_SB.PCI0.TRP0.D3CX() } If (\_SB.PCI0.TRP1.VDID != 0xFFFFFFFF) { /* RP1 D3 cold exit. */ \_SB.PCI0.TRP1.D3CX() } } Else { Printf("Drop TG0N due to it is already exit D3 cold.") } /* TBT RTD3 exit 10ms delay. */ Sleep (10) } } /* * TBT Group0 OFF method */ Method (TG0F, 0) { If (\_SB.PCI0.TDM0.VDID == 0xFFFFFFFF) { Printf("TDM0 does not exist.") } Else { If (\_SB.PCI0.TDM0.STAT == 1) { /* DMA0 is not in D3Cold now. */ \_SB.PCI0.TDM0.D3CE() /* Enable DMA RTD3 */ If (\_SB.PCI0.TDM0.IF30 != 1) { Return } Printf("Push TBT RPs to D3Cold together") If (\_SB.PCI0.TRP0.VDID != 0xFFFFFFFF) { /* Put RP0 to D3 cold. */ \_SB.PCI0.TRP0.D3CE() } If (\_SB.PCI0.TRP1.VDID != 0xFFFFFFFF) { /* Put RP1 to D3 cold. */ \_SB.PCI0.TRP1.D3CE() } } } } /* * TBT Group1 ON method */ Method (TG1N, 0) { If (\_SB.PCI0.TDM1.VDID == 0xFFFFFFFF) { Printf("TDM1 does not exist.") } Else { If (\_SB.PCI0.TDM1.STAT == 0) { /* DMA1 is in D3Cold early. */ \_SB.PCI0.TDM1.D3CX() /* RTD3 Exit */ Printf("Bring TBT RPs out of D3Code.") If (\_SB.PCI0.TRP2.VDID != 0xFFFFFFFF) { /* RP2 D3 cold exit. */ \_SB.PCI0.TRP2.D3CX() } If (\_SB.PCI0.TRP3.VDID != 0xFFFFFFFF) { /* RP3 D3 cold exit. */ \_SB.PCI0.TRP3.D3CX() } } Else { Printf("Drop TG1N due to it is already exit D3 cold.") } /* TBT RTD3 exit 10ms delay. */ Sleep (10) } } /* * TBT Group1 OFF method */ Method (TG1F, 0) { If (\_SB.PCI0.TDM1.VDID == 0xFFFFFFFF) { Printf("TDM1 does not exist.") } Else { If (\_SB.PCI0.TDM1.STAT == 1) { /* DMA1 is not in D3Cold now */ \_SB.PCI0.TDM1.D3CE() /* Enable DMA RTD3. */ If (\_SB.PCI0.TDM1.IF30 != 1) { Return } Printf("Push TBT RPs to D3Cold together") If (\_SB.PCI0.TRP2.VDID != 0xFFFFFFFF) { /* Put RP2 to D3 cold. */ \_SB.PCI0.TRP2.D3CE() } If (\_SB.PCI0.TRP3.VDID != 0xFFFFFFFF) { /* Put RP3 to D3 cold */ \_SB.PCI0.TRP3.D3CE() } } } } PowerResource (TBT0, 5, 1) { Method (_STA, 0) { Return (\_SB.PCI0.TDM0.STAT) } Method (_ON, 0) { TG0N() } Method (_OFF, 0) { If (\_SB.PCI0.TDM0.SD3C == 0) { TG0F() } } } PowerResource (TBT1, 5, 1) { Method (_STA, 0) { Return (\_SB.PCI0.TDM1.STAT) } Method (_ON, 0) { TG1N() } Method (_OFF, 0) { If (\_SB.PCI0.TDM1.SD3C == 0) { TG1F() } } } Method (TCON, 0) { /* Reset IOM D3 cold bit if it is in D3 cold now. */ If (TD3C == 1) /* It was in D3 cold before. */ { /* Reset IOM D3 cold bit. */ TD3C = 0 /* Request IOM for D3 cold exit sequence. */ Local0 = 0 /* Time check counter variable */ /* Wait for ack, the maximum wait time for the ack is 100 msec. */ While ((TACK != 0) && (Local0 < TCSS_IOM_ACK_TIMEOUT_IN_MS)) { /* * Wait in this loop until TACK becomes 0 with timeout * TCSS_IOM_ACK_TIMEOUT_IN_MS by default. */ Sleep (1) /* Delay of 1ms. */ Local0++ } If (Local0 == TCSS_IOM_ACK_TIMEOUT_IN_MS) { Printf("Error: Timeout occurred.") } Else { /* * Program IOP MCTP Drop (TCSS_IN_D3) after D3 cold exit and * acknowledgement by IOM. */ TCD3 = 0 /* * If the TCSS Deven is cleared by BIOS Mailbox request, then * restore to previously saved value of TCSS DEVNE. */ Local0 = 0 While (\_SB.PCI0.TXHC.VDID == 0xFFFFFFFF) { If (DSGS () == 1) { DSCR (0) } Local0++ If (Local0 == 5) { Printf("pCode mailbox command failed.") Break } } } } Else { Printf("Drop TCON due to it is already exit D3 cold.") } } Method (TCOF, 0) { If ((\_SB.PCI0.TXHC.SD3C != 0) || (\_SB.PCI0.TDM0.SD3C != 0) || (\_SB.PCI0.TDM1.SD3C != 0)) { Printf("Skip D3C entry.") Return } /* * If the TCSS Deven in normal state, then Save current TCSS DEVEN value and * clear it. */ Local0 = 0 While (\_SB.PCI0.TXHC.VDID != 0xFFFFFFFF) { If (DSGS () == 0) { DSCR (1) } Local0++ If (Local0 == 5) { Printf("pCode mailbox command failed.") Break } } /* * Program IOM MCTP Drop (TCSS_IN_D3) in D3Cold entry before entering D3 cold. */ TCD3 = 1 /* Request IOM for D3 cold entry sequence. */ TD3C = 1 } PowerResource (D3C, 5, 0) { /* * Variable to save power state * 1 - TC Cold request cleared. * 0 - TC Cold request sent. */ Name (STAT, 0x1) Method (_STA, 0) { Return (STAT) } Method (_ON, 0) { \_SB.PCI0.TCON() STAT = 1 } Method (_OFF, 0) { \_SB.PCI0.TCOF() STAT = 0 } } /* * TCSS xHCI device */ Device (TXHC) { Name (_ADR, 0x000D0000) Name (_DDN, "North XHCI controller") Name (_STR, Unicode ("North XHCI controller")) Name (DCPM, TCSS_XHCI) Method (_STA, 0x0, NotSerialized) { If (THCE == 1) { Return (0x0F) } Else { Return (0x0) } } #include "tcss_xhci.asl" } /* * TCSS DMA0 device */ Device (TDM0) { Name (_ADR, 0x000D0002) Name (_DDN, "TBT DMA0 controller") Name (_STR, Unicode ("TBT DMA0 controller")) Name (DUID, 0) /* TBT DMA number */ Name (DCPM, TCSS_DMA0) Method (_STA, 0x0, NotSerialized) { If (DME0 == 1) { Return (0x0F) } Else { Return (0x0) } } #include "tcss_dma.asl" } /* * TCSS DMA1 device */ Device (TDM1) { Name (_ADR, 0x000D0003) Name (_DDN, "TBT DMA1 controller") Name (_STR, Unicode ("TBT DMA1 controller")) Name (DUID, 1) /* TBT DMA number */ Name (DCPM, TCSS_DMA1) Method (_STA, 0x0, NotSerialized) { If (DME1 == 1) { Return (0x0F) } Else { Return (0x0) } } #include "tcss_dma.asl" } /* * TCSS PCIE Root Port #00 */ Device (TRP0) { Name (_ADR, 0x00070000) Name (TUID, 0) /* TBT PCIE RP Number 0 for RP00 */ Name (LTEN, 0) /* Latency Tolerance Reporting Mechanism, 0:Disable, 1:Enable */ Name (LMSL, 0) /* PCIE LTR max snoop Latency */ Name (LNSL, 0) /* PCIE LTR max no snoop Latency */ Name (DCPM, TCSS_TBT_PCIE0_RP0) Method (_STA, 0x0, NotSerialized) { If (TRE0 == 1) { Return (0x0F) } Else { Return (0x0) } } Method (_INI) { LTEN = 0 LMSL = 0x88C8 LNSL = 0x88C8 } #include "tcss_pcierp.asl" } /* * TCSS PCIE Root Port #01 */ Device (TRP1) { Name (_ADR, 0x00070001) Name (TUID, 1) /* TBT PCIE RP Number 1 for RP01 */ Name (LTEN, 0) /* Latency Tolerance Reporting Mechanism, 0:Disable, 1:Enable */ Name (LMSL, 0) /* PCIE LTR max snoop Latency */ Name (LNSL, 0) /* PCIE LTR max no snoop Latency */ Name (DCPM, TCSS_TBT_PCIE0_RP1) Method (_STA, 0x0, NotSerialized) { If (TRE1 == 1) { Return (0x0F) } Else { Return (0x0) } } Method (_INI) { LTEN = 0 LMSL = 0x88C8 LNSL = 0x88C8 } #include "tcss_pcierp.asl" } /* * TCSS PCIE Root Port #02 */ Device (TRP2) { Name (_ADR, 0x00070002) Name (TUID, 2) /* TBT PCIE RP Number 2 for RP02 */ Name (LTEN, 0) /* Latency Tolerance Reporting Mechanism, 0:Disable, 1:Enable */ Name (LMSL, 0) /* PCIE LTR max snoop Latency */ Name (LNSL, 0) /* PCIE LTR max no snoop Latency */ Name (DCPM, TCSS_TBT_PCIE0_RP2) Method (_STA, 0x0, NotSerialized) { If (TRE2 == 1) { Return (0x0F) } Else { Return (0x0) } } Method (_INI) { LTEN = 0 LMSL = 0x88C8 LNSL = 0x88C8 } #include "tcss_pcierp.asl" } /* * TCSS PCIE Root Port #03 */ Device (TRP3) { Name (_ADR, 0x00070003) Name (TUID, 3) /* TBT PCIE RP Number 3 for RP03 */ Name (LTEN, 0) /* Latency Tolerance Reporting Mechanism, 0:Disable, 1:Enable */ Name (LMSL, 0) /* PCIE LTR max snoop Latency */ Name (LNSL, 0) /* PCIE LTR max no snoop Latency */ Name (DCPM, TCSS_TBT_PCIE0_RP3) Method (_STA, 0x0, NotSerialized) { If (TRE3 == 1) { Return (0x0F) } Else { Return (0x0) } } Method (_INI) { LTEN = 0 LMSL = 0x88C8 LNSL = 0x88C8 } #include "tcss_pcierp.asl" } }