/* * This file is part of the coreboot project. * * Copyright (C) 2010 Advanced Micro Devices, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include #include #include #include #include #include static void sata_init(struct device *dev) { /************************************** * Configure the SATA port multiplier * **************************************/ #define BYTE_TO_DWORD_OFFSET(x) (x/4) #define AHCI_BASE_ADDRESS_REG 0x24 #define MISC_CONTROL_REG 0x40 #define UNLOCK_BIT (1<<0) #define SATA_CAPABILITIES_REG 0xfc #define CFG_CAP_SPM (1<<12) u32 *ahci_ptr = (void *)(uintptr_t)ALIGN_DOWN( pci_read_config32(dev, AHCI_BASE_ADDRESS_REG), 256); u32 temp; /* unlock the write-protect */ temp = pci_read_config32(dev, MISC_CONTROL_REG); temp |= UNLOCK_BIT; pci_write_config32(dev, MISC_CONTROL_REG, temp); /* set the SATA AHCI mode to allow port expanders */ *(ahci_ptr + BYTE_TO_DWORD_OFFSET(SATA_CAPABILITIES_REG)) |= CFG_CAP_SPM; /* lock the write-protect */ temp = pci_read_config32(dev, MISC_CONTROL_REG); temp &= ~UNLOCK_BIT; pci_write_config32(dev, MISC_CONTROL_REG, temp); }; static struct pci_operations lops_pci = { /* .set_subsystem = pci_dev_set_subsystem, */ }; static struct device_operations sata_ops = { .read_resources = pci_dev_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .init = sata_init, .ops_pci = &lops_pci, }; static const unsigned short pci_device_ids[] = { PCI_DEVICE_ID_AMD_CZ_SATA, PCI_DEVICE_ID_AMD_CZ_SATA_AHCI, 0 }; static const struct pci_driver sata0_driver __pci_driver = { .ops = &sata_ops, .vendor = PCI_VENDOR_ID_AMD, .devices = pci_device_ids, };