/* SPDX-License-Identifier: GPL-2.0-only */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "chip.h" static void set_io_addr_reg(struct device *dev, u32 nodeid, u32 linkn, u32 reg, u32 io_min, u32 io_max) { u32 tempreg; /* io range allocation. Limit */ tempreg = (nodeid & 0xf) | ((nodeid & 0x30) << (8 - 4)) | (linkn << 4) | ((io_max & 0xf0) << (12 - 4)); pci_write_config32(SOC_ADDR_DEV, reg + 4, tempreg); tempreg = 3 | ((io_min & 0xf0) << (12 - 4)); /* base: ISA and VGA ? */ pci_write_config32(SOC_ADDR_DEV, reg, tempreg); } static void set_mmio_addr_reg(u32 nodeid, u32 linkn, u32 reg, u32 index, u32 mmio_min, u32 mmio_max) { u32 tempreg; /* io range allocation. Limit */ tempreg = (nodeid & 0xf) | (linkn << 4) | (mmio_max & 0xffffff00); pci_write_config32(SOC_ADDR_DEV, reg + 4, tempreg); tempreg = 3 | (nodeid & 0x30) | (mmio_min & 0xffffff00); pci_write_config32(SOC_ADDR_DEV, reg, tempreg); } static void read_resources(struct device *dev) { struct resource *res; /* * This MMCONF resource must be reserved in the PCI domain. * It is not honored by the coreboot resource allocator if it is in * the CPU_CLUSTER. */ mmconf_resource(dev, MMIO_CONF_BASE); /* NB IOAPIC2 resource */ res = new_resource(dev, IO_APIC2_ADDR); /* IOAPIC2 */ res->base = IO_APIC2_ADDR; res->size = 0x00001000; res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; } static void set_resource(struct device *dev, struct resource *res, u32 nodeid) { resource_t rbase, rend; unsigned int reg, link_num; char buf[50]; /* Make certain the resource has actually been set */ if (!(res->flags & IORESOURCE_ASSIGNED)) return; /* If I have already stored this resource don't worry about it */ if (res->flags & IORESOURCE_STORED) return; /* Only handle PCI memory and IO resources */ if (!(res->flags & (IORESOURCE_MEM | IORESOURCE_IO))) return; /* Ensure I am actually looking at a resource of function 1 */ if ((res->index & 0xffff) < 0x1000) return; /* Get the base address */ rbase = res->base; /* Get the limit (rounded up) */ rend = resource_end(res); /* Get the register and link */ reg = res->index & 0xfff; /* 4k */ link_num = IOINDEX_LINK(res->index); if (res->flags & IORESOURCE_IO) set_io_addr_reg(dev, nodeid, link_num, reg, rbase>>8, rend>>8); else if (res->flags & IORESOURCE_MEM) set_mmio_addr_reg(nodeid, link_num, reg, (res->index >> 24), rbase >> 8, rend >> 8); res->flags |= IORESOURCE_STORED; snprintf(buf, sizeof(buf), " ", nodeid, link_num); report_resource_stored(dev, res, buf); } /** * I tried to reuse the resource allocation code in set_resource() * but it is too difficult to deal with the resource allocation magic. */ static void create_vga_resource(struct device *dev) { struct bus *link; /* find out which link the VGA card is connected, * we only deal with the 'first' vga card */ for (link = dev->link_list ; link ; link = link->next) if (link->bridge_ctrl & PCI_BRIDGE_CTL_VGA) break; /* no VGA card installed */ if (link == NULL) return; printk(BIOS_DEBUG, "VGA: %s has VGA device\n", dev_path(dev)); /* Route A0000-BFFFF, IO 3B0-3BB 3C0-3DF */ pci_write_config32(SOC_ADDR_DEV, D18F1_VGAEN, VGA_ADDR_ENABLE); } static void set_resources(struct device *dev) { struct bus *bus; struct resource *res; /* do we need this? */ create_vga_resource(dev); /* Set each resource we have found */ for (res = dev->resource_list ; res ; res = res->next) set_resource(dev, res, 0); for (bus = dev->link_list ; bus ; bus = bus->next) if (bus->children) assign_resources(bus); } static void northbridge_init(struct device *dev) { setup_ioapic((u8 *)IO_APIC2_ADDR, GNB_IOAPIC_ID); } static unsigned long acpi_fill_hest(acpi_hest_t *hest) { void *addr, *current; /* Skip the HEST header. */ current = (void *)(hest + 1); addr = agesawrapper_getlateinitptr(PICK_WHEA_MCE); if (addr != NULL) current += acpi_create_hest_error_source(hest, current, 0, (void *)((u32)addr + 2), *(uint16_t *)addr - 2); addr = agesawrapper_getlateinitptr(PICK_WHEA_CMC); if (addr != NULL) current += acpi_create_hest_error_source(hest, current, 1, (void *)((u32)addr + 2), *(uint16_t *)addr - 2); return (unsigned long)current; } static void northbridge_fill_ssdt_generator(const struct device *device) { msr_t msr; char pscope[] = "\\_SB.PCI0"; acpigen_write_scope(pscope); msr = rdmsr(TOP_MEM); acpigen_write_name_dword("TOM1", msr.lo); msr = rdmsr(TOP_MEM2); /* * Since XP only implements parts of ACPI 2.0, we can't use a qword * here. * See http://www.acpi.info/presentations/S01USMOBS169_OS%2520new.ppt * slide 22ff. * Shift value right by 20 bit to make it fit into 32bit, * giving us 1MB granularity and a limit of almost 4Exabyte of memory. */ acpigen_write_name_dword("TOM2", (msr.hi << 12) | msr.lo >> 20); acpigen_pop_len(); } static void patch_ssdt_processor_scope(acpi_header_t *ssdt) { unsigned int len = ssdt->length - sizeof(acpi_header_t); unsigned int i; for (i = sizeof(acpi_header_t); i < len; i++) { /* Search for _PR_ scope and replace it with _SB_ */ if (*(uint32_t *)((unsigned long)ssdt + i) == 0x5f52505f) *(uint32_t *)((unsigned long)ssdt + i) = 0x5f42535f; } /* Recalculate checksum */ ssdt->checksum = 0; ssdt->checksum = acpi_checksum((void *)ssdt, ssdt->length); } static unsigned long agesa_write_acpi_tables(const struct device *device, unsigned long current, acpi_rsdp_t *rsdp) { acpi_srat_t *srat; acpi_slit_t *slit; acpi_header_t *ssdt; acpi_header_t *alib; acpi_header_t *ivrs; acpi_hest_t *hest; acpi_bert_t *bert; /* HEST */ current = ALIGN(current, 8); hest = (acpi_hest_t *)current; acpi_write_hest(hest, acpi_fill_hest); acpi_add_table(rsdp, (void *)current); current += hest->header.length; /* BERT */ if (CONFIG(ACPI_BERT) && bert_errors_present()) { /* Skip the table if no errors are present. ACPI driver reports * a table with a 0-length region: * BERT: [Firmware Bug]: table invalid. */ void *rgn; size_t size; bert_errors_region(&rgn, &size); if (!rgn) { printk(BIOS_ERR, "Error: Can't find BERT storage area\n"); } else { current = ALIGN(current, 8); bert = (acpi_bert_t *)current; acpi_write_bert(bert, (uintptr_t)rgn, size); acpi_add_table(rsdp, (void *)current); current += bert->header.length; } } current = ALIGN(current, 8); printk(BIOS_DEBUG, "ACPI: * IVRS at %lx\n", current); ivrs = agesawrapper_getlateinitptr(PICK_IVRS); if (ivrs != NULL) { memcpy((void *)current, ivrs, ivrs->length); ivrs = (acpi_header_t *)current; current += ivrs->length; acpi_add_table(rsdp, ivrs); } else { printk(BIOS_DEBUG, " AGESA IVRS table NULL. Skipping.\n"); } /* SRAT */ current = ALIGN(current, 8); printk(BIOS_DEBUG, "ACPI: * SRAT at %lx\n", current); srat = (acpi_srat_t *)agesawrapper_getlateinitptr(PICK_SRAT); if (srat != NULL) { memcpy((void *)current, srat, srat->header.length); srat = (acpi_srat_t *)current; current += srat->header.length; acpi_add_table(rsdp, srat); } else { printk(BIOS_DEBUG, " AGESA SRAT table NULL. Skipping.\n"); } /* SLIT */ current = ALIGN(current, 8); printk(BIOS_DEBUG, "ACPI: * SLIT at %lx\n", current); slit = (acpi_slit_t *)agesawrapper_getlateinitptr(PICK_SLIT); if (slit != NULL) { memcpy((void *)current, slit, slit->header.length); slit = (acpi_slit_t *)current; current += slit->header.length; acpi_add_table(rsdp, slit); } else { printk(BIOS_DEBUG, " AGESA SLIT table NULL. Skipping.\n"); } /* ALIB */ current = ALIGN(current, 16); printk(BIOS_DEBUG, "ACPI: * AGESA ALIB SSDT at %lx\n", current); alib = (acpi_header_t *)agesawrapper_getlateinitptr(PICK_ALIB); if (alib != NULL) { memcpy((void *)current, alib, alib->length); alib = (acpi_header_t *)current; current += alib->length; acpi_add_table(rsdp, (void *)alib); } else { printk(BIOS_DEBUG, " AGESA ALIB SSDT table NULL." " Skipping.\n"); } current = ALIGN(current, 16); printk(BIOS_DEBUG, "ACPI: * SSDT at %lx\n", current); ssdt = (acpi_header_t *)agesawrapper_getlateinitptr(PICK_PSTATE); if (ssdt != NULL) { patch_ssdt_processor_scope(ssdt); memcpy((void *)current, ssdt, ssdt->length); ssdt = (acpi_header_t *)current; current += ssdt->length; } else { printk(BIOS_DEBUG, " AGESA PState table NULL. Skipping.\n"); } acpi_add_table(rsdp, ssdt); printk(BIOS_DEBUG, "ACPI: * SSDT for PState at %lx\n", current); return current; } static struct device_operations northbridge_operations = { .read_resources = read_resources, .set_resources = set_resources, .enable_resources = pci_dev_enable_resources, .init = northbridge_init, .acpi_fill_ssdt = northbridge_fill_ssdt_generator, .write_acpi_tables = agesa_write_acpi_tables, }; static const unsigned short pci_device_ids[] = { PCI_DEVICE_ID_AMD_15H_MODEL_606F_NB_HT, PCI_DEVICE_ID_AMD_15H_MODEL_707F_NB_HT, 0 }; static const struct pci_driver family15_northbridge __pci_driver = { .ops = &northbridge_operations, .vendor = PCI_VENDOR_ID_AMD, .devices = pci_device_ids, }; /* * Enable VGA cycles. Set memory ranges of the FCH legacy devices (TPM, HPET, * BIOS RAM, Watchdog Timer, IOAPIC and ACPI) as non-posted. Set remaining * MMIO to posted. Route all I/O to the southbridge. */ void amd_initcpuio(void) { uintptr_t topmem = bsp_topmem(); uintptr_t base, limit; /* Enable legacy video routing: D18F1xF4 VGA Enable */ pci_write_config32(SOC_ADDR_DEV, D18F1_VGAEN, VGA_ADDR_ENABLE); /* Non-posted: range(HPET-LAPIC) or 0xfed00000 through 0xfee00000-1 */ base = (HPET_BASE_ADDRESS >> 8) | MMIO_WE | MMIO_RE; limit = (ALIGN_DOWN(LOCAL_APIC_ADDR - 1, 64 * KiB) >> 8) | MMIO_NP; pci_write_config32(SOC_ADDR_DEV, NB_MMIO_LIMIT_LO(0), limit); pci_write_config32(SOC_ADDR_DEV, NB_MMIO_BASE_LO(0), base); /* Remaining PCI hole posted MMIO: TOM-HPET (TOM through 0xfed00000-1 */ base = (topmem >> 8) | MMIO_WE | MMIO_RE; limit = ALIGN_DOWN(HPET_BASE_ADDRESS - 1, 64 * KiB) >> 8; pci_write_config32(SOC_ADDR_DEV, NB_MMIO_LIMIT_LO(1), limit); pci_write_config32(SOC_ADDR_DEV, NB_MMIO_BASE_LO(1), base); /* Route all I/O downstream */ base = 0 | IO_WE | IO_RE; limit = ALIGN_DOWN(0xffff, 4 * KiB); pci_write_config32(SOC_ADDR_DEV, NB_IO_LIMIT(0), limit); pci_write_config32(SOC_ADDR_DEV, NB_IO_BASE(0), base); } void fam15_finalize(void *chip_info) { u32 value; /* TODO: move IOAPIC code to dsdt.asl */ pci_write_config32(SOC_GNB_DEV, NB_IOAPIC_INDEX, 0); pci_write_config32(SOC_GNB_DEV, NB_IOAPIC_DATA, 5); /* disable No Snoop */ value = pci_read_config32(SOC_HDA0_DEV, HDA_DEV_CTRL_STATUS); value &= ~HDA_NO_SNOOP_EN; pci_write_config32(SOC_HDA0_DEV, HDA_DEV_CTRL_STATUS, value); } void domain_enable_resources(struct device *dev) { /* Must be called after PCI enumeration and resource allocation */ if (!acpi_is_wakeup_s3()) do_agesawrapper(AMD_INIT_MID, "amdinitmid"); } void domain_read_resources(struct device *dev) { uint64_t uma_base = get_uma_base(); uint32_t uma_size = get_uma_size(); uint32_t mem_useable = (uintptr_t)cbmem_top(); msr_t tom = rdmsr(TOP_MEM); msr_t high_tom = rdmsr(TOP_MEM2); uint64_t high_mem_useable; int idx = 0x10; pci_domain_read_resources(dev); /* 0x0 -> 0x9ffff */ ram_resource(dev, idx++, 0, 0xa0000 / KiB); /* 0xa0000 -> 0xbffff: legacy VGA */ mmio_resource(dev, idx++, 0xa0000 / KiB, 0x20000 / KiB); /* 0xc0000 -> 0xfffff: Option ROM */ reserved_ram_resource(dev, idx++, 0xc0000 / KiB, 0x40000 / KiB); /* * 0x100000 (1MiB) -> low top useable RAM * cbmem_top() accounts for low UMA and TSEG if they are used. */ ram_resource(dev, idx++, (1 * MiB) / KiB, (mem_useable - (1 * MiB)) / KiB); /* Low top useable RAM -> Low top RAM (bottom pci mmio hole) */ reserved_ram_resource(dev, idx++, mem_useable / KiB, (tom.lo - mem_useable) / KiB); /* If there is memory above 4GiB */ if (high_tom.hi) { /* 4GiB -> high top useable */ if (uma_base >= (4ull * GiB)) high_mem_useable = uma_base; else high_mem_useable = ((uint64_t)high_tom.lo | ((uint64_t)high_tom.hi << 32)); ram_resource(dev, idx++, (4ull * GiB) / KiB, ((high_mem_useable - (4ull * GiB)) / KiB)); /* High top useable RAM -> high top RAM */ if (uma_base >= (4ull * GiB)) { reserved_ram_resource(dev, idx++, uma_base / KiB, uma_size / KiB); } } } /********************************************************************* * Change the vendor / device IDs to match the generic VBIOS header. * *********************************************************************/ u32 map_oprom_vendev(u32 vendev) { u32 new_vendev; if ((vendev >= 0x100298e0) && (vendev <= 0x100298ef)) new_vendev = 0x100298e0; else if ((vendev >= 0x10029870) && (vendev <= 0x1002987f)) new_vendev = 0x10029870; else new_vendev = vendev; if (vendev != new_vendev) printk(BIOS_NOTICE, "Mapping PCI device %8x to %8x\n", vendev, new_vendev); return new_vendev; } __weak void set_board_env_params(GNB_ENV_CONFIGURATION *params) { } void SetNbEnvParams(GNB_ENV_CONFIGURATION *params) { const struct device *dev = SOC_IOMMU_DEV; params->IommuSupport = dev && dev->enabled; set_board_env_params(params); } void SetNbMidParams(GNB_MID_CONFIGURATION *params) { /* 0=Primary and decode all VGA resources, 1=Secondary - decode none */ params->iGpuVgaMode = 0; params->GnbIoapicAddress = IO_APIC2_ADDR; } void hda_soc_ssdt_quirks(const struct device *dev) { const char *scope = acpi_device_path(dev); static const struct fieldlist list[] = { FIELDLIST_OFFSET(0x42), FIELDLIST_NAMESTR("NSDI", 1), FIELDLIST_NAMESTR("NSDO", 1), FIELDLIST_NAMESTR("NSEN", 1), }; struct opregion opreg = OPREGION("AZPD", PCI_CONFIG, 0x0, 0x100); assert(scope); acpigen_write_scope(scope); /* * OperationRegion(AZPD, PCI_Config, 0x00, 0x100) * Field (AZPD, AnyAcc, NoLock, Preserve) { * Offset (0x42), * NSDI, 1, * NSDO, 1, * NSEN, 1, * } */ acpigen_write_opregion(&opreg); acpigen_write_field(opreg.name, list, ARRAY_SIZE(list), FIELD_ANYACC | FIELD_NOLOCK | FIELD_PRESERVE); /* * Method (_INI, 0, NotSerialized) { * If (LEqual (OSVR, 0x03)) { * Store (Zero, NSEN) * Store (One, NSDO) * Store (One, NSDI) * } * } */ acpigen_write_method("_INI", 0); acpigen_write_if_lequal_namestr_int("OSVR", 0x03); acpigen_write_store_op_to_namestr(ZERO_OP, "NSEN"); acpigen_write_store_op_to_namestr(ONE_OP, "NSDO"); acpigen_write_store_op_to_namestr(ONE_OP, "NSDI"); acpigen_pop_len(); /* If */ acpigen_pop_len(); /* Method _INI */ acpigen_pop_len(); /* Scope */ }