/* SPDX-License-Identifier: GPL-2.0-only */ /* * ACPI - create the Fixed ACPI Description Tables (FADT) */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include unsigned long acpi_fill_madt(unsigned long current) { /* create all subtables for processors */ current = acpi_create_madt_lapics(current); /* Write Kern IOAPIC, only one */ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, CONFIG_MAX_CPUS, IO_APIC_ADDR, 0); current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, CONFIG_MAX_CPUS+1, IO_APIC2_ADDR, 24); /* 0: mean bus 0--->ISA */ /* 0: PIC 0 */ /* 2: APIC 2 */ /* 5 mean: 0101 --> Edge-triggered, Active high */ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) current, 0, 0, 2, 0); current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) current, 0, 9, 9, 0xf); /* create all subtables for processors */ current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)current, 0xff, 5, 1); /* 1: LINT1 connect to NMI */ return current; } /* * Reference section 5.2.9 Fixed ACPI Description Table (FADT) * in the ACPI 3.0b specification. */ void acpi_fill_fadt(acpi_fadt_t *fadt) { printk(BIOS_DEBUG, "pm_base: 0x%04x\n", STONEYRIDGE_ACPI_IO_BASE); fadt->sci_int = 9; /* IRQ 09 - ACPI SCI */ if (permanent_smi_handler()) { fadt->smi_cmd = APM_CNT; fadt->acpi_enable = APM_CNT_ACPI_ENABLE; fadt->acpi_disable = APM_CNT_ACPI_DISABLE; } fadt->pm1a_evt_blk = ACPI_PM_EVT_BLK; fadt->pm1b_evt_blk = 0x0000; fadt->pm1a_cnt_blk = ACPI_PM1_CNT_BLK; fadt->pm1b_cnt_blk = 0x0000; fadt->pm2_cnt_blk = 0x0000; fadt->pm_tmr_blk = ACPI_PM_TMR_BLK; fadt->gpe0_blk = ACPI_GPE0_BLK; fadt->gpe1_blk = 0x0000; /* No gpe1 block */ fadt->pm1_evt_len = 4; /* 32 bits */ fadt->pm1_cnt_len = 2; /* 16 bits */ fadt->pm2_cnt_len = 0; fadt->pm_tmr_len = 4; /* 32 bits */ fadt->gpe0_blk_len = 8; /* 64 bits */ fadt->gpe1_blk_len = 0; fadt->gpe1_base = 0; fadt->p_lvl2_lat = ACPI_FADT_C2_NOT_SUPPORTED; fadt->p_lvl3_lat = ACPI_FADT_C3_NOT_SUPPORTED; fadt->flush_size = 0; /* set to 0 if WBINVD is 1 in flags */ fadt->flush_stride = 0; /* set to 0 if WBINVD is 1 in flags */ fadt->duty_offset = 1; /* CLK_VAL bits 3:1 */ fadt->duty_width = 3; /* CLK_VAL bits 3:1 */ fadt->day_alrm = 0; /* 0x7d these have to be */ fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */ fadt->century = 0; /* 0x7f to make rtc alarm work */ fadt->iapc_boot_arch = FADT_BOOT_ARCH; /* See table 5-10 */ fadt->res2 = 0; /* reserved, MUST be 0 ACPI 3.0 */ fadt->flags = ACPI_FADT_WBINVD | /* See table 5-10 ACPI 3.0a spec */ ACPI_FADT_C1_SUPPORTED | ACPI_FADT_SLEEP_BUTTON | ACPI_FADT_S4_RTC_WAKE | ACPI_FADT_32BIT_TIMER | ACPI_FADT_RESET_REGISTER | ACPI_FADT_PCI_EXPRESS_WAKE | ACPI_FADT_PLATFORM_CLOCK | ACPI_FADT_S4_RTC_VALID | ACPI_FADT_REMOTE_POWER_ON; /* Format is from 5.2.3.1: Generic Address Structure */ /* reset_reg: see section 4.7.3.6 ACPI 3.0a spec */ /* 8 bit write of value 0x06 to 0xCF9 in IO space */ fadt->reset_reg.space_id = ACPI_ADDRESS_SPACE_IO; fadt->reset_reg.bit_width = 8; fadt->reset_reg.bit_offset = 0; fadt->reset_reg.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS; fadt->reset_reg.addrl = SYS_RESET; fadt->reset_reg.addrh = 0x0; fadt->reset_value = 6; fadt->ARM_boot_arch = 0; /* MUST be 0 ACPI 3.0 */ fadt->FADT_MinorVersion = 0; /* MUST be 0 ACPI 3.0 */ fadt->x_firmware_ctl_l = 0; /* set to 0 if firmware_ctrl is used */ fadt->x_firmware_ctl_h = 0; fadt->x_pm1a_evt_blk.space_id = ACPI_ADDRESS_SPACE_IO; fadt->x_pm1a_evt_blk.bit_width = 32; fadt->x_pm1a_evt_blk.bit_offset = 0; fadt->x_pm1a_evt_blk.access_size = ACPI_ACCESS_SIZE_WORD_ACCESS; fadt->x_pm1a_evt_blk.addrl = ACPI_PM_EVT_BLK; fadt->x_pm1a_evt_blk.addrh = 0x0; fadt->x_pm1b_evt_blk.space_id = ACPI_ADDRESS_SPACE_IO; fadt->x_pm1b_evt_blk.bit_width = 0; fadt->x_pm1b_evt_blk.bit_offset = 0; fadt->x_pm1b_evt_blk.access_size = 0; fadt->x_pm1b_evt_blk.addrl = 0x0; fadt->x_pm1b_evt_blk.addrh = 0x0; fadt->x_pm1a_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO; fadt->x_pm1a_cnt_blk.bit_width = 16; fadt->x_pm1a_cnt_blk.bit_offset = 0; fadt->x_pm1a_cnt_blk.access_size = ACPI_ACCESS_SIZE_WORD_ACCESS; fadt->x_pm1a_cnt_blk.addrl = ACPI_PM1_CNT_BLK; fadt->x_pm1a_cnt_blk.addrh = 0x0; fadt->x_pm1b_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO; fadt->x_pm1b_cnt_blk.bit_width = 0; fadt->x_pm1b_cnt_blk.bit_offset = 0; fadt->x_pm1b_cnt_blk.access_size = 0; fadt->x_pm1b_cnt_blk.addrl = 0x0; fadt->x_pm1b_cnt_blk.addrh = 0x0; /* * Note: Under this current AMD C state implementation, this is no * longer used and should not be reported to OS. */ fadt->x_pm2_cnt_blk.space_id = ACPI_ADDRESS_SPACE_IO; fadt->x_pm2_cnt_blk.bit_width = 0; fadt->x_pm2_cnt_blk.bit_offset = 0; fadt->x_pm2_cnt_blk.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS; fadt->x_pm2_cnt_blk.addrl = 0; fadt->x_pm2_cnt_blk.addrh = 0x0; fadt->x_pm_tmr_blk.space_id = ACPI_ADDRESS_SPACE_IO; fadt->x_pm_tmr_blk.bit_width = 32; fadt->x_pm_tmr_blk.bit_offset = 0; fadt->x_pm_tmr_blk.access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; fadt->x_pm_tmr_blk.addrl = ACPI_PM_TMR_BLK; fadt->x_pm_tmr_blk.addrh = 0x0; fadt->x_gpe0_blk.space_id = ACPI_ADDRESS_SPACE_IO; fadt->x_gpe0_blk.bit_width = 64; /* EventStatus + Event Enable */ fadt->x_gpe0_blk.bit_offset = 0; fadt->x_gpe0_blk.access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS; fadt->x_gpe0_blk.addrl = ACPI_GPE0_BLK; fadt->x_gpe0_blk.addrh = 0x0; fadt->x_gpe1_blk.space_id = ACPI_ADDRESS_SPACE_IO; fadt->x_gpe1_blk.bit_width = 0; fadt->x_gpe1_blk.bit_offset = 0; fadt->x_gpe1_blk.access_size = 0; fadt->x_gpe1_blk.addrl = 0; fadt->x_gpe1_blk.addrh = 0x0; } void generate_cpu_entries(const struct device *device) { int cores, cpu; /* Stoney Ridge is single node, just report # of cores */ cores = pci_read_config32(SOC_NB_DEV, NB_CAPABILITIES2) & CMP_CAP_MASK; cores++; /* number of cores is CmpCap+1 */ printk(BIOS_DEBUG, "ACPI \\_SB report %d core(s)\n", cores); /* Generate BSP \_SB.P000 */ acpigen_write_processor(0, ACPI_GPE0_BLK, 6); acpigen_pop_len(); /* Generate AP \_SB.Pxxx */ for (cpu = 1; cpu < cores; cpu++) { acpigen_write_processor(cpu, 0, 0); acpigen_pop_len(); } } unsigned long southbridge_write_acpi_tables(const struct device *device, unsigned long current, struct acpi_rsdp *rsdp) { return acpi_write_hpet(device, current, rsdp); } static void acpi_create_gnvs(struct global_nvs_t *gnvs) { /* Clear out GNVS. */ memset(gnvs, 0, sizeof(*gnvs)); if (CONFIG(CONSOLE_CBMEM)) gnvs->cbmc = (uintptr_t)cbmem_find(CBMEM_ID_CONSOLE); if (CONFIG(CHROMEOS)) { /* Initialize Verified Boot data */ chromeos_init_chromeos_acpi(&gnvs->chromeos); gnvs->chromeos.vbt2 = ACTIVE_ECFW_RO; } /* Set unknown wake source */ gnvs->pm1i = ~0ULL; gnvs->gpei = ~0ULL; /* CPU core count */ gnvs->pcnt = dev_count_cpu(); } void southbridge_inject_dsdt(const struct device *device) { struct global_nvs_t *gnvs; gnvs = cbmem_find(CBMEM_ID_ACPI_GNVS); if (gnvs) { acpi_create_gnvs(gnvs); /* Add it to DSDT */ acpigen_write_scope("\\"); acpigen_write_name_dword("NVSA", (uintptr_t)gnvs); acpigen_pop_len(); } } static void acpigen_soc_get_gpio_in_local5(uintptr_t addr) { /* * Store (\_SB.GPR2 (addr), Local5) * \_SB.GPR2 is used to read control byte 2 from control register. * / It is defined in gpio_lib.asl. */ acpigen_write_store(); acpigen_emit_namestring("\\_SB.GPR2"); acpigen_write_integer(addr); acpigen_emit_byte(LOCAL5_OP); } static int acpigen_soc_get_gpio_val(unsigned int gpio_num, uint32_t mask) { if (gpio_num >= SOC_GPIO_TOTAL_PINS) { printk(BIOS_WARNING, "Warning: Pin %d should be smaller than" " %d\n", gpio_num, SOC_GPIO_TOTAL_PINS); return -1; } uintptr_t addr = (uintptr_t) gpio_get_address(gpio_num); acpigen_soc_get_gpio_in_local5(addr); /* If (And (Local5, mask)) */ acpigen_write_if_and(LOCAL5_OP, mask); /* Store (One, Local0) */ acpigen_write_store_ops(ONE_OP, LOCAL0_OP); acpigen_pop_len(); /* If */ /* Else */ acpigen_write_else(); /* Store (Zero, Local0) */ acpigen_write_store_ops(ZERO_OP, LOCAL0_OP); acpigen_pop_len(); /* Else */ return 0; } static int acpigen_soc_set_gpio_val(unsigned int gpio_num, uint32_t val) { if (gpio_num >= SOC_GPIO_TOTAL_PINS) { printk(BIOS_WARNING, "Warning: Pin %d should be smaller than" " %d\n", gpio_num, SOC_GPIO_TOTAL_PINS); return -1; } uintptr_t addr = (uintptr_t) gpio_get_address(gpio_num); /* Store (0x40, Local0) */ acpigen_write_store(); acpigen_write_integer(GPIO_PIN_OUT); acpigen_emit_byte(LOCAL0_OP); acpigen_soc_get_gpio_in_local5(addr); if (val) { /* Or (Local5, GPIO_PIN_OUT, Local5) */ acpigen_write_or(LOCAL5_OP, LOCAL0_OP, LOCAL5_OP); } else { /* Not (GPIO_PIN_OUT, Local6) */ acpigen_write_not(LOCAL0_OP, LOCAL6_OP); /* And (Local5, Local6, Local5) */ acpigen_write_and(LOCAL5_OP, LOCAL6_OP, LOCAL5_OP); } /* * SB.GPW2 (addr, Local5) * \_SB.GPW2 is used to write control byte in control register * / byte 2. It is defined in gpio_lib.asl. */ acpigen_emit_namestring("\\_SB.GPW2"); acpigen_write_integer(addr); acpigen_emit_byte(LOCAL5_OP); return 0; } int acpigen_soc_read_rx_gpio(unsigned int gpio_num) { return acpigen_soc_get_gpio_val(gpio_num, GPIO_PIN_IN); } int acpigen_soc_get_tx_gpio(unsigned int gpio_num) { return acpigen_soc_get_gpio_val(gpio_num, GPIO_PIN_OUT); } int acpigen_soc_set_tx_gpio(unsigned int gpio_num) { return acpigen_soc_set_gpio_val(gpio_num, 1); } int acpigen_soc_clear_tx_gpio(unsigned int gpio_num) { return acpigen_soc_set_gpio_val(gpio_num, 0); }