/* * This file is part of the coreboot project. * * Copyright (C) 2015-2016 Advanced Micro Devices, Inc. * Copyright (C) 2015 Intel Corp. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "chip.h" void __weak mainboard_romstage_entry_s3(int s3_resume) { /* By default, don't do anything */ } asmlinkage void car_stage_entry(void) { struct postcar_frame pcf; uintptr_t top_of_ram; int s3_resume = acpi_s3_resume_allowed() && acpi_is_wakeup_s3(); console_init(); mainboard_romstage_entry_s3(s3_resume); elog_boot_notify(s3_resume); if (!s3_resume) { post_code(0x40); } else { printk(BIOS_INFO, "S3 detected\n"); post_code(0x60); } post_code(0x43); if (cbmem_recovery(s3_resume)) printk(BIOS_CRIT, "Failed to recover cbmem\n"); if (romstage_handoff_init(s3_resume)) printk(BIOS_ERR, "Failed to set romstage handoff data\n"); if (CONFIG(SMM_TSEG)) smm_list_regions(); post_code(0x44); if (postcar_frame_init(&pcf, 1 * KiB)) die("Unable to initialize postcar frame.\n"); /* * We need to make sure ramstage will be run cached. At this point exact * location of ramstage in cbmem is not known. Instruct postcar to cache * 16 megs under cbmem top which is a safe bet to cover ramstage. */ top_of_ram = (uintptr_t) cbmem_top(); postcar_frame_add_mtrr(&pcf, top_of_ram - 16*MiB, 16*MiB, MTRR_TYPE_WRBACK); /* Cache the memory-mapped boot media. */ postcar_frame_add_romcache(&pcf, MTRR_TYPE_WRPROT); /* Cache the TSEG region */ postcar_enable_tseg_cache(&pcf); post_code(0x45); run_postcar_phase(&pcf); post_code(0x50); /* Should never see this post code. */ }