/* SPDX-License-Identifier: GPL-2.0-only */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include _Static_assert(CONFIG_MAX_CPUS == 8, "Do not override MAX_CPUS. To reduce the number of " "available cores, use the downcore_mode and disable_smt devicetree settings instead."); /* MP and SMM loading initialization. */ /* * Do essential initialization tasks before APs can be fired up - * * 1. Prevent race condition in MTRR solution. Enable MTRRs on the BSP. This * creates the MTRR solution that the APs will use. Otherwise APs will try to * apply the incomplete solution as the BSP is calculating it. */ static void pre_mp_init(void) { x86_setup_mtrrs_with_detect_no_above_4gb(); x86_mtrr_check(); } static void post_mp_init(void) { global_smi_enable(); apm_control(APM_CNT_SMMINFO); } static const struct mp_ops mp_ops = { .pre_mp_init = pre_mp_init, .get_cpu_count = get_cpu_count, .get_smm_info = get_smm_info, .relocation_handler = smm_relocation_handler, .post_mp_init = post_mp_init, }; void mp_init_cpus(struct bus *cpu_bus) { if (mp_init_with_smm(cpu_bus, &mp_ops) != CB_SUCCESS) die_with_post_code(POST_HW_INIT_FAILURE, "mp_init_with_smm failed. Halting.\n"); /* pre_mp_init made the flash not cacheable. Reset to WP for performance. */ mtrr_use_temp_range(FLASH_BASE_ADDR, CONFIG_ROM_SIZE, MTRR_TYPE_WRPROT); } static void model_17_init(struct device *dev) { check_mca(); set_cstate_io_addr(); amd_update_microcode_from_cbfs(); } static struct device_operations cpu_dev_ops = { .init = model_17_init, }; static struct cpu_device_id cpu_table[] = { { X86_VENDOR_AMD, RAVEN1_B0_CPUID}, { X86_VENDOR_AMD, PICASSO_B0_CPUID }, { X86_VENDOR_AMD, PICASSO_B1_CPUID }, { X86_VENDOR_AMD, RAVEN2_A0_CPUID }, { X86_VENDOR_AMD, RAVEN2_A1_CPUID }, { 0, 0 }, }; static const struct cpu_driver model_17 __cpu_driver = { .ops = &cpu_dev_ops, .id_table = cpu_table, };