/* SPDX-License-Identifier: GPL-2.0-only */ #ifndef PHOENIX_CHIP_OPENSIL_H #define PHOENIX_CHIP_OPENSIL_H #include #define DDI_DESCRIPTOR_COUNT 5 /* DDI display connector type */ enum ddi_connector_type { DDI_DP = 0, // DP DDI_EDP, // eDP DDI_SINGLE_LINK_DVI, // Single Link DVI-D DDI_DUAL_LINK_DVI, // Dual Link DVI-D DDI_HDMI, // HDMI DDI_DP_TO_VGA, // DP-to-VGA DDI_DP_TO_LVDS, // DP-to-LVDS DDI_NUTMEG_DP_TO_VGA, // Hudson-2 NutMeg DP-to-VGA DDI_SINGLE_LINK_DVI_I, // Single Link DVI-I DDI_DP_W_TYPEC, // DP with USB type C DDI_DP_WO_TYPEC, // DP without USB type C DDI_EDP_TO_LVDS, // eDP-to-LVDS translator chip without AMD SW init DDI_EDP_TO_LVDS_SW, // eDP-to-LVDS translator which requires AMD SW init DDI_AUTO_DETECT, // VBIOS auto detect connector type DDI_UNUSED_TYPE, // UnusedType DDI_MAX_CONNECTOR_TYPE // Not valid value, used to verify input }; /* DDI Descriptor: used for configuring display outputs */ struct ddi_descriptor { uint8_t connector_type; // see ddi_connector_type uint8_t aux_index; uint8_t hdp_index; }; #define USB2_PORT_COUNT 8 #define USB3_PORT_COUNT 3 #define USBC_COMBO_PHY_COUNT 3 struct fch_usb2_phy { uint8_t compdistune; ///< COMPDISTUNE uint8_t pllbtune; ///< PLLBTUNE uint8_t pllitune; ///< PLLITUNE uint8_t pllptune; ///< PLLPTUNE uint8_t sqrxtune; ///< SQRXTUNE uint8_t txfslstune; ///< TXFSLSTUNE uint8_t txpreempamptune; ///< TXPREEMPAMPTUNE uint8_t txpreemppulsetune; ///< TXPREEMPPULSETUNE uint8_t txrisetune; ///< TXRISETUNE uint8_t txvreftune; ///< TXVREFTUNE uint8_t txhsxvtune; ///< TXHSXVTUNE uint8_t txrestune; ///< TXRESTUNE }; struct fch_usb3_phy { uint8_t tx_term_ctrl; ///< tx_term_ctrl uint8_t rx_term_ctrl; ///< rx_term_ctrl uint8_t tx_vboost_lvl_en; ///< TX_VBOOST_LVL_EN uint8_t tx_vboost_lvl; ///< TX_VBOOST_LVL }; #define USB0_PORT0 0 #define USB0_PORT1 1 #define USB0_PORT2 1 #define USB0_PORT3 3 #define USB1_PORT0 (0<<2) #define USB1_PORT1 (1<<2) #define USB1_PORT2 (1<<2) #define USB1_PORT3 (3<<2) #define USB_COMBO_PHY_MODE_USB_C 0 #define USB_COMBO_PHY_MODE_USB_ONLY 1 #define USB_COMBO_PHY_MODE_USB_DPM 2 #define USB_COMBO_PHY_MODE_USB_DPP 3 struct usb_phy_config { struct fch_usb2_phy Usb2PhyPort[USB2_PORT_COUNT]; ///< USB 2.0 Driving Strength struct fch_usb3_phy Usb3PhyPort[USB3_PORT_COUNT]; ///< USB3 PHY Adjustment uint8_t BatteryChargerEnable; ///< bit[1:0]-Usb0 Port[1:0], bit[3:2]-Usb1 Port[1:0] uint8_t PhyP3CpmP4Support; ///< bit[1:0]-Usb0 Port[1:0], bit[3:2]-Usb1 Port[1:0] uint8_t ComboPhyStaticConfig[USBC_COMBO_PHY_COUNT]; ///< 0-Type C, 1- USB only mode, 2- DP only mode, 3- USB + DP }; #endif /* PHOENIX_CHIP_OPENSIL_H */