/* SPDX-License-Identifier: GPL-2.0-only */ /* TODO: Check if this is still correct */ #ifndef MENDOCINO_CHIP_H #define MENDOCINO_CHIP_H #include #include #include #include #include #include #include #include #include struct soc_amd_mendocino_config { struct soc_amd_common_config common_config; u8 i2c_scl_reset; struct dw_i2c_bus_config i2c[I2C_CTRLR_COUNT]; struct i2c_pad_control i2c_pad[I2C_CTRLR_COUNT]; /* Enable S0iX support */ bool s0ix_enable; enum { DOWNCORE_AUTO = 0, DOWNCORE_1 = 1, /* Run with 1 physical core */ DOWNCORE_2 = 3, /* Run with 2 physical cores */ DOWNCORE_3 = 4, /* Run with 3 physical cores */ DOWNCORE_4 = 6, /* Run with 4 physical cores */ DOWNCORE_5 = 8, /* Run with 5 physical cores */ DOWNCORE_6 = 9, /* Run with 6 physical cores */ DOWNCORE_7 = 10, /* Run with 7 physical cores */ } downcore_mode; bool disable_smt; /* disable second thread on all physical cores */ uint8_t stt_control; uint8_t stt_pcb_sensor_count; uint16_t stt_min_limit; uint16_t stt_m1; uint16_t stt_m2; uint16_t stt_m3; uint16_t stt_m4; uint16_t stt_m5; uint16_t stt_m6; uint16_t stt_c_apu; uint16_t stt_c_gpu; uint16_t stt_c_hs2; uint16_t stt_alpha_apu; uint16_t stt_alpha_gpu; uint16_t stt_alpha_hs2; uint16_t stt_skin_temp_apu; uint16_t stt_skin_temp_gpu; uint16_t stt_skin_temp_hs2; uint16_t stt_error_coeff; uint16_t stt_error_rate_coefficient; /* Default */ uint8_t stapm_boost; uint32_t stapm_time_constant_s; uint32_t apu_only_sppt_limit; uint32_t sustained_power_limit_mW; uint32_t fast_ppt_limit_mW; uint32_t slow_ppt_limit_mW; uint32_t slow_ppt_time_constant_s; uint32_t thermctl_limit_degreeC; uint32_t vrm_current_limit_mA; uint32_t vrm_maximum_current_limit_mA; uint32_t vrm_soc_current_limit_mA; /* Throttle (e.g., Low/No Battery) */ uint32_t vrm_current_limit_throttle_mA; uint32_t vrm_maximum_current_limit_throttle_mA; uint32_t vrm_soc_current_limit_throttle_mA; /* tablet mode.*/ uint32_t sustained_power_limit_mW_tablet; /* Thermal profile B*/ uint32_t fast_ppt_limit_mW_B; uint32_t slow_ppt_limit_mW_B; uint32_t slow_ppt_time_constant_s_B; uint32_t sustained_power_limit_mW_B; uint16_t stt_min_limit_B; uint16_t stt_m1_B; uint16_t stt_m2_B; uint16_t stt_c_apu_B; uint16_t stt_skin_temp_apu_B; /* Thermal profile C*/ uint32_t fast_ppt_limit_mW_C; uint32_t slow_ppt_limit_mW_C; uint32_t slow_ppt_time_constant_s_C; uint32_t sustained_power_limit_mW_C; uint16_t stt_min_limit_C; uint16_t stt_m1_C; uint16_t stt_m2_C; uint16_t stt_c_apu_C; uint16_t stt_skin_temp_apu_C; /* Thermal profile D*/ uint32_t fast_ppt_limit_mW_D; uint32_t slow_ppt_limit_mW_D; uint32_t slow_ppt_time_constant_s_D; uint32_t sustained_power_limit_mW_D; uint16_t stt_min_limit_D; uint16_t stt_m1_D; uint16_t stt_m2_D; uint16_t stt_c_apu_D; uint16_t stt_skin_temp_apu_D; /* Thermal profile E*/ uint32_t fast_ppt_limit_mW_E; uint32_t slow_ppt_limit_mW_E; uint32_t slow_ppt_time_constant_s_E; uint32_t sustained_power_limit_mW_E; uint16_t stt_min_limit_E; uint16_t stt_m1_E; uint16_t stt_m2_E; uint16_t stt_c_apu_E; uint16_t stt_skin_temp_apu_E; /* Thermal profile F*/ uint32_t fast_ppt_limit_mW_F; uint32_t slow_ppt_limit_mW_F; uint32_t slow_ppt_time_constant_s_F; uint32_t sustained_power_limit_mW_F; uint16_t stt_min_limit_F; uint16_t stt_m1_F; uint16_t stt_m2_F; uint16_t stt_c_apu_F; uint16_t stt_skin_temp_apu_F; uint8_t smartshift_enable; uint8_t system_configuration; uint8_t cppc_ctrl; uint8_t cppc_perf_limit_max_range; uint8_t cppc_perf_limit_min_range; uint8_t cppc_epp_max_range; uint8_t cppc_epp_min_range; uint8_t cppc_preferred_cores; /* telemetry settings */ uint32_t telemetry_vddcrvddfull_scale_current_mA; uint32_t telemetry_vddcrvddoffset; uint32_t telemetry_vddcrsocfull_scale_current_mA; uint32_t telemetry_vddcrsocoffset; /* The array index is the general purpose PCIe clock output number. Values in here aren't the values written to the register to have the default to be always on. */ enum gpp_clk_req gpp_clk_config[GPP_CLK_OUTPUT_AVAILABLE]; /* performance policy for the PCIe links: power consumption vs. link speed */ enum { DXIO_PSPP_DISABLED = 0, DXIO_PSPP_PERFORMANCE, DXIO_PSPP_BALANCED, DXIO_PSPP_POWERSAVE, } pspp_policy; uint8_t usb_phy_custom; struct usb_phy_config usb_phy; /* Set for PCIe optimization w/a and a double confirming on the result of PCIe Signal Integrity is highly recommended. */ uint8_t dxio_tx_vboost_enable; }; #endif /* MENDOCINO_CHIP_H */