## SPDX-License-Identifier: GPL-2.0-only obj ?= build src ?= src build-dir = $(obj)/sbom src-dir = $(src)/sbom # Strip quotes from binary paths and SBOM file paths. Each binary path should have a # corresponding SBOM file path, but not every SBOM file path needs a binary path. That # is because binary files are only needed if they are used to extract information from # them which in turn can be included in the SBOM files (like version or config stuff). # But for some Software there are only SBOM files, which basically tell the most generic # information about that piece of Software. Ideally one would not need the binary files # at all, because extacting information out of mostly unknown binary blobs is a pain. CONFIG_ME_BIN_PATH := $(call strip_quotes, $(CONFIG_ME_BIN_PATH)) CONFIG_SBOM_ME_PATH := $(call strip_quotes, $(CONFIG_SBOM_ME_PATH)) CONFIG_FSP_S_FILE := $(call strip_quotes, $(CONFIG_FSP_S_FILE)) CONFIG_FSP_M_FILE := $(call strip_quotes, $(CONFIG_FSP_M_FILE)) CONFIG_FSP_T_FILE := $(call strip_quotes, $(CONFIG_FSP_T_FILE)) CONFIG_SBOM_FSP_PATH := $(call strip_quotes, $(CONFIG_SBOM_FSP_PATH)) CONFIG_PAYLOAD_FILE := $(call strip_quotes, $(CONFIG_PAYLOAD_FILE)) CONFIG_SBOM_PAYLOAD_PATH := $(call strip_quotes, $(CONFIG_SBOM_PAYLOAD_PATH)) CONFIG_EC_PATH := $(call strip_quotes, $(CONFIG_EC_PATH)) CONFIG_SBOM_EC_PATH := $(call strip_quotes, $(CONFIG_SBOM_EC_PATH)) CONFIG_SBOM_BIOS_ACM_PATH := $(call strip_quotes, $(CONFIG_SBOM_BIOS_ACM_PATH)) CONFIG_SBOM_SINIT_ACM_PATH := $(call strip_quotes, $(CONFIG_SBOM_SINIT_ACM_PATH)) CONFIG_SBOM_COMPILER_PATH := $(call strip_quotes, $(CONFIG_SBOM_COMPILER_PATH)) # Select the correct payload directory for the used payload. Ideally we could just make this # a one-liner, but since the payload is generated externally (with an extra make command), we # have to hard code the paths here. ifeq ($(CONFIG_SBOM_PAYLOAD_GENERATE), y) payload-git-dir-$(CONFIG_PAYLOAD_BOOTBOOT) = payloads/external/BOOTBOOT/bootboot payload-git-dir-$(CONFIG_PAYLOAD_DEPTHCHARGE) = payloads/external/depthcharge/depthcharge payload-git-dir-$(CONFIG_PAYLOAD_FILO) = payloads/external/FILO/filo payload-git-dir-$(CONFIG_PAYLOAD_GRUB2) = payloads/external/GRUB2/grub2 payload-git-dir-$(CONFIG_PAYLOAD_LINUXBOOT) = payloads/external/LinuxBoot/linuxboot payload-git-dir-$(CONFIG_PAYLOAD_SEABIOS) = payloads/external/SeaBIOS/seabios payload-git-dir-$(CONFIG_PAYLOAD_SKIBOOT) = payloads/external/skiboot/skiboot #payload-git-dir-$(CONFIG_PAYLOAD_TIANOCORE) = payloads/external/tianocore/ payload-git-dir-$(CONFIG_PAYLOAD_UBOOT) = payloads/external/U-Boot/u-boot payload-git-dir-$(CONFIG_PAYLOAD_IPXE) = payloads/external/iPXE/ipxe ifneq ($(payload-git-dir-y),) # only proceed with payload sbom data, if one of the above payloads were selected (should be guarded by Kconfig as well) # e.g. payload-git-dir-y=payloads/external/SeaBIOS/seabios -> payload-json-file=$(build-dir)/payload-SeaBIOS.json payload-swid = $(build-dir)/payload-$(subst /,,$(dir $(patsubst payloads/external/%,%,$(payload-git-dir-y)))).json payload-swid-template = $(patsubst $(build-dir)/%.json,$(src-dir)/%.json,$(payload-swid)) endif endif # Add all SBOM files into the swid-files-y target. This target contains all # .json, .ini, .uswid, .xml, .pc SBOM files that are later merged into one uSWID SBOM file. # Some of these have an option that this Makefile generates/extracts some information from # binary files in order to give more complete/detailed information inside the SBOM file. # These files are either in src/sbom/ or build/sbom (if they are generated). swid-files-$(CONFIG_SBOM_ME) += $(if $(CONFIG_SBOM_ME_GENERATE), $(build-dir)/intel-me.json, $(CONFIG_SBOM_ME_PATH)) swid-files-$(CONFIG_SBOM_PAYLOAD) += $(if $(CONFIG_SBOM_PAYLOAD_GENERATE), $(payload-swid), $(CONFIG_SBOM_PAYLOAD_PATH)) # TODO think about just using one CoSWID tag for all intel-microcode instead of one for each. maybe put each microcode into files entity of CoSWID tag? swid-files-$(CONFIG_SBOM_MICROCODE) += $(patsubst 3rdparty/intel-microcode/intel-ucode/%, $(build-dir)/intel-microcode-%.json, $(filter 3rdparty/intel-microcode/intel-ucode/%, $(cpu_microcode_bins))) swid-files-$(CONFIG_SBOM_MICROCODE) += $(patsubst ${FIRMWARE_LOCATION}/UcodePatch_%.bin, $(build-dir)/amd-microcode-%.json, $(filter ${FIRMWARE_LOCATION}/UcodePatch_%.bin, $(cpu_microcode_bins))) swid-files-$(CONFIG_SBOM_FSP) += $(CONFIG_SBOM_FSP_PATH) swid-files-$(CONFIG_SBOM_EC) += $(CONFIG_SBOM_EC_PATH) swid-files-$(CONFIG_SBOM_BIOS_ACM) += $(CONFIG_BIOS_ACM_PATH) swid-files-$(CONFIG_SBOM_SINIT_ACM) += $(CONFIG_SINIT_ACM_PATH) vboot-pkgconfig-files = $(obj)/external/vboot_reference-bootblock/vboot_host.pc $(obj)/external/vboot_reference-romstage/vboot_host.pc $(obj)/external/vboot_reference-ramstage/vboot_host.pc $(obj)/external/vboot_reference-postcar/vboot_host.pc swid-files-$(CONFIG_SBOM_VBOOT) += $(vboot-pkgconfig-files) $(vboot-pkgconfig-files): $(VBOOT_LIB_bootblock) $(VBOOT_LIB_romstage) $(VBOOT_LIB_ramstage) $(VBOOT_LIB_postcar) # src/security/vboot/Makefile.inc ifeq ($(CONFIG_SBOM_COMPILER),y) compiler-toolchain = $(CC_bootblock) $(CC_romstage) $(CC_ramstage) $(CC_postcar) $(CC_verstage) $(LD_bootblock) $(LD_romstage) $(LD_ramstage) $(LD_postcar) $(LD_verstage) $(AS_bootblock) $(AS_romstage) $(AS_ramstage) $(AS_postcar) $(AS_verstage) swid-files-compiler = $(CONFIG_SBOM_COMPILER_PATH) endif # include all licenses used in coreboot. Ideally we would only include the licenses, # which are used in this build coreboot-licenses = $(foreach license, $(patsubst %.txt, %, $(filter-out retained-copyrights.txt, $(patsubst LICENSES/%, %, $(wildcard LICENSES/*)))), https://spdx.org/licenses/$(license).html) # only include CBFS SBOM section if there is any data for it ifeq ($(CONFIG_SBOM),y) cbfs-files-y += sbom sbom-file = $(build-dir)/sbom.uswid sbom-type = raw endif ## Build final SBOM (Software Bill of Materials) file in uswid format $(build-dir)/sbom.uswid: $(build-dir)/coreboot.json $$(swid-files-y) $(swid-files-compiler) | $(build-dir)/goswid $(build-dir) echo " SBOM " $^ $(build-dir)/goswid convert -o $@ \ --parent $(build-dir)/coreboot.json \ $(if $(swid-files-y), --requires $$(echo $(swid-files-y) | tr ' ' ','),) \ $(if $(swid-files-compiler), --compiler $(swid-files-compiler),) # all build files depend on the $(build-dir) directory being created $(build-dir): mkdir -p $(build-dir) $(build-dir)/goswid: | $(build-dir) echo " SBOM building goswid tool" cd util/goswid; \ GO111MODULE=on go build -o $(abspath $@) ./cmd/goswid ## Generate all .json files $(build-dir)/compiler-%.json: $(src-dir)/compiler-%.json | $(build-dir)/goswid cp $< $@ for tool in $$(echo $(compiler-toolchain) | tr ' ' '\n' | sort | uniq); do \ version=$$($$tool --version 2>&1 | head -n 1 | grep -Eo '([0-9]+\.[0-9]+\.*[0-9]*)'); \ $(build-dir)/goswid add-payload-file -o $@ -i $@ --name $$(basename $$tool) --version $$version; \ done $(build-dir)/coreboot.json: $(src-dir)/coreboot.json .git/HEAD | $(build-dir)/goswid cp $< $@ git_tree_hash=$$(git log -n 1 --format=%T);\ git_comm_hash=$$(git log -n 1 --format=%H);\ sed -i -e "s/<colloquial_version>/$$git_tree_hash/" -e "s/<software_version>/$$git_comm_hash/" $@;\ $(build-dir)/goswid add-license -o $@ -i $@ $(coreboot-licenses) $(build-dir)/intel-me.json: $(src-dir)/intel-me.json $(CONFIG_ME_BIN_PATH) | $(build-dir) cp $< $@ #TODO put more Intel Management Engine metadata in sbom file $(build-dir)/generic-fsp.json: $(src-dir)/generic-fsp.json $(CONFIG_FSP_S_FILE) $(CONFIG_FSP_T_FILE) $(CONFIG_FSP_M_FILE) | $(build-dir)/goswid cp $(src-dir)/generic-fsp.json $@ ifneq ($(CONFIG_FSP_S_FILE),) echo " SBOM Adding FSP-S" $(build-dir)/goswid add-payload-file -o $@ -i $@ --name "FSP-S" endif ifneq ($(CONFIG_FSP_T_FILE),) echo " SBOM Adding FSP-T" $(build-dir)/goswid add-payload-file -o $@ -i $@ --name "FSP-T" endif ifneq ($(CONFIG_FSP_M_FILE),) echo " SBOM Adding FSP-M" $(build-dir)/goswid add-payload-file -o $@ -i $@ --name "FSP-M" endif $(build-dir)/intel-microcode-%.json: $(src-dir)/intel-microcode.json 3rdparty/intel-microcode/intel-ucode/% | $(build-dir) $(build-dir)/goswid cp $< $@ year=$$(hexdump --skip 8 --length 2 --format '"%04x"' $(word 2,$^));\ day=$$(hexdump --skip 10 --length 1 --format '"%02x"' $(word 2,$^));\ month=$$(hexdump --skip 11 --length 1 --format '"%02x"' $(word 2,$^));\ sed -i "s/<software_version>/$$year-$$month-$$day/" $@ #TODO add cpuid (processor family, model, stepping) as extra attribute $(build-dir)/amd-microcode-%.json: $(src-dir)/amd-microcode.json ${FIRMWARE_LOCATION}/UcodePatch_%.bin | $(build-dir) $(build-dir)/goswid cp $< $@ year=$$(hexdump --skip 0 --length 2 --format '"%04x"' $(word 2,$^));\ day=$$(hexdump --skip 2 --length 1 --format '"%02x"' $(word 2,$^));\ month=$$(hexdump --skip 3 --length 1 --format '"%02x"' $(word 2,$^));\ sed -i "s/<software_version>/$$year-$$month-$$day/" $@ $(payload-swid): $(payload-swid-template) $(CONFIG_PAYLOAD_FILE) | $(build-dir) cp $< $@;\ git_tree_hash=$$(git --git-dir $(payload-git-dir-y)/.git log -n 1 --format=%T);\ git_comm_hash=$$(git --git-dir $(payload-git-dir-y)/.git log -n 1 --format=%H);\ sed -i -e "s/<colloquial_version>/$$git_tree_hash/" -e "s/<software_version>/$$git_comm_hash/" $@;