/* * (C) Copyright 2001 * Humboldt Solutions Ltd, adrian@humboldt.co.uk. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ #include #include #include #include #include #include #include #include #include #include "i2c.h" #include "mpc107.h" #define NUM_DIMMS 1 #define NUM_BANKS 2 void mpc107_init(void); void sdram_init(void) { struct sdram_dimm_info dimms[NUM_DIMMS]; struct sdram_bank_info banks[NUM_BANKS]; mpc107_init(); mpc107_probe_dimms(NUM_DIMMS, dimms, banks); (void)mpc107_config_memory(NUM_BANKS, banks, 2); } struct mem_range * sizeram(void) { int i; struct sdram_dimm_info dimms[NUM_DIMMS]; struct sdram_bank_info banks[NUM_BANKS]; static struct mem_range meminfo; meminfo.basek = 0; meminfo.sizek = 0; mpc107_probe_dimms(NUM_DIMMS, dimms, banks); for (i = 0; i < NUM_BANKS; i++) meminfo.sizek += banks[i].size; meminfo.sizek >>= 10; return &meminfo; } /* * Configure the MPC107 with the most pessimistic settings. These * are modified by reading the SPD EEPROM and adjusting accordingly. * One thing to note. The SPD settings can be wrong, as * was the case for my machine. I could only configure 32Mb out of * 128Mb using these settings. */ void mpc107_init(void) { uint16_t reg16; uint32_t reg32; uint32_t is32bits; /* * PCI Cmd */ pci_ppc_write_config16(0, 0, 0x04, 0x0006); /* * PCI Stat */ reg16 = pci_ppc_read_config16(0, 0, 0x06); reg16 |= 0xffff; pci_ppc_write_config16(0, 0, 0x06, reg16); /* * PICR1 * 0x00400000 burst read wait states = 1 * 0x00040000 processor type = 603/750 * 0x00002000 enable LocalBusSlave * 0x00001000 enable Flash write * 0x00000800 enable MCP* assertion * 0x00000400 enable TEA* assertion * 0x00000200 enable data bus parking * 0x00000080 restrict flash write width * 0x00000040 enable PCI store gathering * 0x00000010 enable loop-snoop * 0x00000008 enable address bus parking * 0x00000004 enable speculative PCI reads */ reg32 = pci_ppc_read_config32(0, 0, 0xa8); /* * Preserve RCS0/Addr Map bits */ reg32 &= 0x11; reg32 |= 0xff041a98; pci_ppc_write_config32(0, 0, 0xa8, reg32); /* * PICR2 * 0x20000000 no Serialize Config cycles * 0x08000000 No PCI Snoop cycles * 0x04000000 FF0 is Local ROM * 0x02000000 Flash write lockout * 0x00000000 snoop wt states = 0 * 0x00040000 snoop wt states = 1 * 0x00080000 snoop wt states = 2 * 0x000c0000 snoop wt states = 3 * 0x00000000 addr phase wt states = 0 * 0x00000004 addr phase wt states = 1 * 0x00000008 addr phase wt states = 2 * 0x0000000c addr phase wt states = 3 */ reg32 = 0x04000000; pci_ppc_write_config32(0, 0, 0xac, reg32); /* * EUMBBAR */ reg32 = 0xfc000000; pci_ppc_write_config32(0, 0, 0x78, reg32); /* * MCCR1 - Set MEMGO bit later! * 0x75800000 Safe local ROM = 10+3 clocks * 0x73800000 Fast local ROM = 7+3 clocks * 0x00100000 Burst ROM/Flash enable * 0x00040000 Self-refresh enable * 0x00020000 EDO/FP enable (else SDRAM) * 0x00010000 Parity check * 0x0000FFFF 16Mbit/2 bank SDRAM * 0x0000AAAA 256Mbit/4 bank SDRAM * 0x00005555 64Mbit/2 bank SDRAM * 0x00000000 64Mbit/4 bank SDRAM */ reg32 = pci_ppc_read_config32(0, 0, 0xf0); is32bits = (reg32 & 0x00400000) == 0; reg32 &= 0x00080000; /* Preserve MEMGO bit in case we're in RAM */ reg32 |= 0x75800000; pci_ppc_write_config32(0, 0, 0xf0, reg32); /* * MCCR2 * 0x40000000 TS_WAIT_TIMER = 3 clocks * 0x04000000 ASRISE = 2 clocks * 0x00400000 ASFALL = 2 clocks * 0x00100000 SDRAM parity (else ECC) * 0x00080000 SDRAM inline writes * 0x00040000 SDRAM inline reads * 0x00020000 ECC enable * 0x00010000 EDO (else FP) * 0x000004cc Refresh 33MHz bus (307 clocks) * 0x00000cc4 Refresh 66MHz bus (817 clocks) * 0x000010fc Refresh 83MHz bus (1087 clocks) * 0x0000150c Refresh 100MHz bus (1347 clocks) * 0x00001d2c Refresh 133MHz bus (1867 clocks) * 0x00000002 Reserve a page * 0x00000001 RWM parity */ reg32 = 0x044004cc; pci_ppc_write_config32(0, 0, 0xf4, reg32); /* * MCCR3 * 0x70000000 BSTOPRE_M = 7 * 0x08000000 REFREC = 8 clocks * 0x00400000 RDLAT = 4 clocks * 0x00300000 RDLAT = 3 clocks */ reg32 = 0x78400000; pci_ppc_write_config32(0, 0, 0xf8, reg32); /* * MCCR4 * 0x30000000 PRETOACT = 3 clocks * 0x05000000 ACTOPRE = 5 clocks * 0x00800000 Enable 8-beat burst (32-bit bus) * 0x00400000 Enable Inline ECC/Parity * 0x00200000 Enable Extended ROM (RCS2/RCS3) * 0x00100000 Registered buffers * 0x00000000 BSTOPRE_U = 0 * 0x00020000 Change RCS1 to 8-bit mode * 0x00008000 Registered DIMMs * 0x00003000 CAS Latencey (CL=3) * 0x00002000 CAS Latencey (CL=2) * 0x00000200 Sequential wrap/4-beat burst * 0x00000300 Sequential wrap/8-beat burst * 0x00000030 Reserve a page * 0x00000009 RWM parity */ reg32 = 0x35323239; if (!is32bits) reg32 |= 0x0300; pci_ppc_write_config32(0, 0, 0xfc, reg32); /* * MSAR1/MSAR2/MESAR1/MESAR2 * * Assume each memory block is 32Mb. This is * most likely NOT correct. */ pci_ppc_write_config32(0, 0, 0x80, 0xc0804000); pci_ppc_write_config32(0, 0, 0x84, 0xc0804000); pci_ppc_write_config32(0, 0, 0x88, 0x00000000); pci_ppc_write_config32(0, 0, 0x8c, 0x01010101); /* * MEAR1/MEAR2/MEEAR1/MEEAR2 */ pci_ppc_write_config32(0, 0, 0x90, 0xffbf7f3f); pci_ppc_write_config32(0, 0, 0x94, 0xffbf7f3f); pci_ppc_write_config32(0, 0, 0x98, 0x00000000); pci_ppc_write_config32(0, 0, 0x9c, 0x10101010); /* * ODCR * 0x80 PCI I/O 50 ohms * 0x40 CPU I/O 50 ohms * 0x30 Mem I/O 8 ohms * 0x20 Mem I/O 13 ohms * 0x10 Mem I/O 20 ohms * 0x00 Mem I/O 40 ohms * 0x0c PCIClk 8 ohms * 0x08 PCIClk 13 ohms * 0x04 PCIClk 20 ohms * 0x00 PCIClk 40 ohms * 0x03 MemClk 8 ohms * 0x02 MemClk 13.3 ohms * 0x01 MemClk 20 ohms * 0x00 MemClk 40 ohms */ pci_ppc_write_config8(0, 0, 0x73, 0xd1); /* * CDCR * 0x8000 PCI_SYNC_OUT disabled * 0x7c00 PCI_CLK disabled * 0x0300 CPU_CLK 8 ohms * 0x0200 CPU_CLK 13 ohms * 0x0100 CPU_CLK 20 ohms * 0x0000 CPU_CLK 40 ohms * 0x0080 SDRAM_SYNC_OUT disabled * 0x0078 SDRAM_CLK disabled * 0x0004 CPU_CLK0 disabled * 0x0002 CPU_CLK1 disabled * 0x0001 CPU_CLK2 disabled */ pci_ppc_write_config16(0, 0, 0x74, 0xfd00); /* * MICR * 0x80 MCP 1=open-drain, 0=output * 0x40 SRESET 1=open-drain, 0=output * 0x20 QACK 1=high-Z, 0=output */ pci_ppc_write_config8(0, 0, 0x76, 0x40); /* * MBEN * 0x02 Enable bank 1 * 0x01 Enable bank 0 */ pci_ppc_write_config8(0, 0, 0xa0, 0x03); /* * PGMAX * 0x32 33MHz value w/ROMFAL=8 */ pci_ppc_write_config8(0, 0, 0xa3, 0x32); /* * Wait 200us */ udelay(200); /* * Now set memgo bit in MCCR1 */ reg32 = pci_ppc_read_config32(0, 0, 0xf0); reg32 |= 0x00080000; /* MEMGO=1 */ pci_ppc_write_config32(0, 0, 0xf0, reg32); /* * Wait again */ udelay(10000); } /* * Configure real memory settings. */ unsigned long mpc107_config_memory(int no_banks, sdram_bank_info * bank, int for_real) { int i, j; char ignore[8]; /* Convert bus clock to cycle time in 100ns units */ unsigned cycle_time = 10 * (2500000000U / get_clock_speed()); /* Approximate */ unsigned access_time = cycle_time - 300; unsigned cas_latency = 0; unsigned rdlat; unsigned refint; unsigned refrec; unsigned acttorw, acttopre; unsigned pretoact, bstopre; enum sdram_error_detect error_detect; uint32_t mccr1; uint32_t mccr2; uint32_t mccr3; uint32_t mccr4; uint8_t bank_enable; uint32_t memstart1, memstart2; uint32_t extmemstart1, extmemstart2; uint32_t memend1, memend2; uint32_t extmemend1, extmemend2; uint32_t address; /* Set up the ignore mask */ for(i = 0; i < no_banks; i++) ignore[i] = (bank[i].size == 0); /* Pick best CAS latency possible */ for (i = 0; i < no_banks; i++) { if (! ignore[i]) { for (j = 0; j < 3; j++) { if (cycle_time >= bank[i].cycle_time[j] && access_time >= bank[i].access_time[j]) { cas_latency = bank[i].cas_latency[j]; break; } } } } if (!cas_latency) return 0; /* For various parameters there is a risk of clashing between banks */ error_detect = (for_real > 1) ? ERRORS_ECC : ERRORS_NONE; for (i = 0; i < no_banks; i++) { if (! ignore[i]) { { for (j = 0; j < 3; j++) if (bank[i].cas_latency[j] == cas_latency) break; if (j == 3) { ignore[i] = 1; if (! for_real) printk_info("Disabling memory bank %d (cas latency)\n", i); } if (bank[i].error_detect < error_detect) error_detect = bank[i].error_detect; } } } /* Read in configuration of port X */ mccr1 = pci_ppc_read_config32(0, 0, 0xf0); mccr2 = pci_ppc_read_config32(0, 0, 0xf4); mccr4 = pci_ppc_read_config32(0, 0, 0xfc); mccr1 &= 0xfff00000; mccr2 &= 0xffe00000; mccr3 = 0; mccr4 &= 0x00230000; pretoact = 0; acttorw = 0; acttopre = 0; for (i = 0; i < no_banks; i++) if (! ignore[i]) { int rowcode = -1; if (for_real) { bank[i].actual_detect = error_detect; bank[i].actual_cas = cas_latency; } switch (bank[i].row_bits) { case 13: if (bank[i].internal_banks == 4) rowcode = 2; else if (bank[i].internal_banks == 2) rowcode = 1; break; case 12: if (bank[i].internal_banks == 4) rowcode = 0; else if (bank[i].internal_banks == 2) rowcode = 1; break; case 11: if (bank[i].internal_banks == 4) rowcode = 0; else if (bank[i].internal_banks == 2) rowcode = 3; break; } if (rowcode == -1) { ignore[i] = 1; if (! for_real) printk_info("Memory bank %d disabled: row bits %d and banks %d not supported\n", i, bank[i].row_bits, bank[i].internal_banks); } else mccr1 |= rowcode << (2 * i); /* Update worst case settings */ if (! ignore[i]) { if (bank[i].min_row_precharge > pretoact) pretoact = bank[i].min_row_precharge; if (bank[i].min_ras_to_cas > acttorw) acttorw = bank[i].min_ras_to_cas; if (bank[i].min_ras > acttopre) acttopre = bank[i].min_ras; } } /* Now convert to clock cycles, rounding up */ pretoact = (100 * pretoact + cycle_time - 1) / cycle_time; acttopre = (100 * acttopre + cycle_time - 1) / cycle_time; acttorw = (100 * acttorw + cycle_time - 1) / cycle_time; refrec = acttopre; bstopre = 0x240; /* Set conservative values, because we can't derive */ refint = 1000; if (error_detect == ERRORS_ECC) { rdlat = cas_latency + 2; mccr4 |= 0x00400000; mccr2 |= 0x000c0001; } else { rdlat = cas_latency + 1; mccr4 |= 0x00100000; } if (pretoact > 16 || acttopre > 16 || acttorw > 16) if (! for_real) printk_info("Timings out of range\n"); mccr4 |= ((pretoact & 0x0f) << 28) | ((acttopre & 0xf) << 24) | ((acttorw & 0x0f) << 4) | ((bstopre & 0x003) << 18) | ((bstopre & 0x3c0) >> 6) | (cas_latency << 12) | 0x00000200 /* burst length */ ; mccr3 |= ((bstopre & 0x03c) << 26) | ((refrec & 0x0f) << 24) | (rdlat << 20); mccr2 |= refint << 2; mccr1 |= 0x00080000; /* memgo */ address = 0; memstart1 = memstart2 = 0; extmemstart1 = extmemstart2 = 0; memend1 = memend2 = 0; extmemend1 = extmemend2 = 0; bank_enable = 0; for (i = 0; i < no_banks; i++) { if (! ignore[i]) { uint32_t end = address + bank[i].size - 1; bank_enable |= 1 << i; if (i < 4) { memstart1 |= ((address >> 20) & 0xff) << (8 * i); extmemstart1 |= ((address >> 28) & 0x03) << (8 * i); memend1 |= ((end >> 20) & 0xff) << (8 * i); extmemend1 |= ((end >> 28) & 0x03) << (8 * i); } else { int k = i - 4; memstart2 |= ((address >> 20) & 0xff) << (8 * k); extmemstart2 |= ((address >> 28) & 0x03) << (8 * k); memend2 |= ((end >> 20) & 0xff) << (8 * k); extmemend2 |= ((end >> 28) & 0x03) << (8 * k); } address += bank[i].size; } } if (for_real) { /* * Mask MEMGO bit before setting MCCR1 */ mccr1 &= ~0x80000; printk_info("MCCR1 = 0x%08x\n", mccr1); pci_ppc_write_config32(0, 0, 0xf0, mccr1); printk_info("MBEN = 0x%02x\n", bank_enable); pci_ppc_write_config8(0, 0, 0xa0, bank_enable); printk_info("MSAR1 = 0x%08x\n", memstart1); pci_ppc_write_config32(0, 0, 0x80, memstart1); printk_info("MSAR2 = 0x%08x\n", memstart2); pci_ppc_write_config32(0, 0, 0x84, memstart2); printk_info("MSAR3 = 0x%08x\n", extmemstart1); pci_ppc_write_config32(0, 0, 0x88, extmemstart1); printk_info("MSAR4 = 0x%08x\n", extmemstart2); pci_ppc_write_config32(0, 0, 0x8c, extmemstart2); printk_info("MEAR1 = 0x%08x\n", memend1); pci_ppc_write_config32(0, 0, 0x90, memend1); printk_info("MEAR2 = 0x%08x\n", memend2); pci_ppc_write_config32(0, 0, 0x94, memend2); printk_info("MEAR3 = 0x%08x\n", extmemend1); pci_ppc_write_config32(0, 0, 0x98, extmemend1); printk_info("MEAR4 = 0x%08x\n", extmemend2); pci_ppc_write_config32(0, 0, 0x9c, extmemend2); printk_info("MCCR2 = 0x%08x\n", mccr2); pci_ppc_write_config32(0, 0, 0xf4, mccr2); printk_info("MCCR3 = 0x%08x\n", mccr3); pci_ppc_write_config32(0, 0, 0xf8, mccr3); printk_info("MCCR4 = 0x%08x\n", mccr4); pci_ppc_write_config32(0, 0, 0xfc, mccr4); udelay(200); /* * Set MEMGO bit */ mccr1 |= 0x80000; printk_info("MCCR1 = 0x%08x\n", mccr1); pci_ppc_write_config32(0, 0, 0xf0, mccr1); udelay(10000); } return address; } static int i2c_wait(unsigned timeout, int writing) { uint32_t x; while (((x = readl(MPC107_BASE + MPC107_I2CSR)) & (MPC107_I2C_CSR_MCF | MPC107_I2C_CSR_MIF)) != (MPC107_I2C_CSR_MCF | MPC107_I2C_CSR_MIF)) { if (ticks_since_boot() > timeout) return -1; } if (x & MPC107_I2C_CSR_MAL) { return -1; } if (writing && (x & MPC107_I2C_CSR_RXAK)) { printk_info("No RXAK\n"); /* generate stop */ writel(MPC107_I2C_CCR_MEN, MPC107_BASE + MPC107_I2CCR); return -1; } writel(0, MPC107_BASE + MPC107_I2CSR); return 0; } static void mpc107_i2c_start(struct i2c_bus *bus) { /* Set clock */ writel(0x1031, MPC107_BASE + MPC107_I2CFDR); /* Clear arbitration */ writel(0, MPC107_BASE + MPC107_I2CSR); } static void mpc107_i2c_stop(struct i2c_bus *bus) { /* After last DIMM shut down I2C */ writel(0x0, MPC107_BASE + MPC107_I2CCR); } static int mpc107_i2c_byte_write(struct i2c_bus *bus, int target, int address, uint8_t data) { unsigned timeout = ticks_since_boot() + 3 * get_hz(); /* Must wait here for clocks to start */ udelay(25000); /* Start with MEN */ writel(MPC107_I2C_CCR_MEN, MPC107_BASE + MPC107_I2CCR); /* Start as master */ writel(MPC107_I2C_CCR_MEN | MPC107_I2C_CCR_MSTA | MPC107_I2C_CCR_MTX, MPC107_BASE + MPC107_I2CCR); /* Write target byte */ writel(target, MPC107_BASE + MPC107_I2CDR); if (i2c_wait(timeout, 1) < 0) return -1; /* Write data address byte */ writel(address, MPC107_BASE + MPC107_I2CDR); if (i2c_wait(timeout, 1) < 0) return -1; /* Write data byte */ writel(data, MPC107_BASE + MPC107_I2CDR); if (i2c_wait(timeout, 1) < 0) return -1; /* generate stop */ writel(MPC107_I2C_CCR_MEN, MPC107_BASE + MPC107_I2CCR); return 0; } static int mpc107_i2c_master_write(struct i2c_bus *bus, int target, int address, const uint8_t *data, int length) { unsigned count; for(count = 0; count < length; count++) { if (mpc107_i2c_byte_write(bus, target, address, data[count]) < 0) return -1; } return count; } #define DIMM_LENGTH 0xfff static int mpc107_i2c_master_read(struct i2c_bus *bus, int target, int address, uint8_t *data, int length) { unsigned timeout = ticks_since_boot() + 3 * get_hz(); unsigned count; /* Must wait here for clocks to start */ udelay(25000); /* Start with MEN */ writel(MPC107_I2C_CCR_MEN, MPC107_BASE + MPC107_I2CCR); /* Start as master */ writel(MPC107_I2C_CCR_MEN | MPC107_I2C_CCR_MSTA | MPC107_I2C_CCR_MTX, MPC107_BASE + MPC107_I2CCR); /* Write target byte */ writel(target, MPC107_BASE + MPC107_I2CDR); if (i2c_wait(timeout, 1) < 0) return -1; /* Write data address byte */ writel(address, MPC107_BASE + MPC107_I2CDR); if (i2c_wait(timeout, 1) < 0) return -1; /* Switch to read - restart */ writel(MPC107_I2C_CCR_MEN | MPC107_I2C_CCR_MSTA | MPC107_I2C_CCR_MTX | MPC107_I2C_CCR_RSTA, MPC107_BASE + MPC107_I2CCR); /* Write target address byte - this time with the read flag set */ writel(target | 1, MPC107_BASE + MPC107_I2CDR); if (i2c_wait(timeout, 0) < 0) return -1; if (length == 1) writel(MPC107_I2C_CCR_MEN | MPC107_I2C_CCR_MSTA | MPC107_I2C_CCR_TXAK, MPC107_BASE + MPC107_I2CCR); else writel(MPC107_I2C_CCR_MEN | MPC107_I2C_CCR_MSTA, MPC107_BASE + MPC107_I2CCR); /* Dummy read */ readl(MPC107_BASE + MPC107_I2CDR); count = 0; while (count < length) { if (i2c_wait(timeout, 0) < 0) return -1; /* Generate txack on next to last byte */ if (count == length - 2) writel(MPC107_I2C_CCR_MEN | MPC107_I2C_CCR_MSTA | MPC107_I2C_CCR_TXAK, MPC107_BASE + MPC107_I2CCR); /* Generate stop on last byte */ if (count == length - 1) writel(MPC107_I2C_CCR_MEN | MPC107_I2C_CCR_TXAK, MPC107_BASE + MPC107_I2CCR); data[count] = readl(MPC107_BASE + MPC107_I2CDR); if (count == 0 && length == DIMM_LENGTH) { if (data[0] == 0xff) { printk_debug("I2C device not present\n"); length = 3; } else { length = data[0]; if (length < 3) length = 3; } } count++; } /* Finish with disable master */ writel(MPC107_I2C_CCR_MEN, MPC107_BASE + MPC107_I2CCR); return length; } i2c_fn mpc107_i2c_fn = { mpc107_i2c_start, mpc107_i2c_stop, mpc107_i2c_master_write, mpc107_i2c_master_read }; /* * Find dimm information. */ void mpc107_probe_dimms(int no_dimms, sdram_dimm_info *dimms, sdram_bank_info * bank) { unsigned char data[256]; unsigned dimm; printk_debug("Probing DIMMS...\n"); mpc107_i2c_start(NULL); for(dimm = 0; dimm < no_dimms; dimm++) { dimms[dimm].number = dimm; dimms[dimm].bank1 = bank + dimm*NUM_BANKS; dimms[dimm].bank2 = bank + dimm*NUM_BANKS + 1; bank[dimm*NUM_BANKS].size = 0; bank[dimm*NUM_BANKS+1].size = 0; bank[dimm*NUM_BANKS].number = 0; bank[dimm*NUM_BANKS+1].number = 1; } for (dimm = 0; dimm < no_dimms; dimm ++) { unsigned limit = mpc107_i2c_master_read(NULL, 0xa0 + 2*dimm, 0, data, DIMM_LENGTH); if (limit > 3) { sdram_dimm_to_bank_info(data, dimms + dimm, 1); memcpy(dimms[dimm].part_number, data + 73, 18); dimms[dimm].part_number[18] = 0; printk_debug("Part Number: %s\n", dimms[dimm].part_number); } } mpc107_i2c_stop(NULL); }