/* SPDX-License-Identifier: GPL-2.0-only */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "raminit.h" #include "pei_data.h" #include "sandybridge.h" #include "chip.h" #include #include #include /* Management Engine is in the southbridge */ #include /* * MRC scrambler seed offsets should be reserved in * mainboard cmos.layout and not covered by checksum. */ #if CONFIG(USE_OPTION_TABLE) #include "option_table.h" #define CMOS_OFFSET_MRC_SEED (CMOS_VSTART_mrc_scrambler_seed >> 3) #define CMOS_OFFSET_MRC_SEED_S3 (CMOS_VSTART_mrc_scrambler_seed_s3 >> 3) #define CMOS_OFFSET_MRC_SEED_CHK (CMOS_VSTART_mrc_scrambler_seed_chk >> 3) #else #define CMOS_OFFSET_MRC_SEED 152 #define CMOS_OFFSET_MRC_SEED_S3 156 #define CMOS_OFFSET_MRC_SEED_CHK 160 #endif #define MRC_CACHE_VERSION 0 static void save_mrc_data(struct pei_data *pei_data) { u16 c1, c2, checksum; /* Save the MRC S3 restore data to cbmem */ mrc_cache_stash_data(MRC_TRAINING_DATA, MRC_CACHE_VERSION, pei_data->mrc_output, pei_data->mrc_output_len); /* Save the MRC seed values to CMOS */ cmos_write32(pei_data->scrambler_seed, CMOS_OFFSET_MRC_SEED); printk(BIOS_DEBUG, "Save scrambler seed 0x%08x to CMOS 0x%02x\n", pei_data->scrambler_seed, CMOS_OFFSET_MRC_SEED); cmos_write32(pei_data->scrambler_seed_s3, CMOS_OFFSET_MRC_SEED_S3); printk(BIOS_DEBUG, "Save s3 scrambler seed 0x%08x to CMOS 0x%02x\n", pei_data->scrambler_seed_s3, CMOS_OFFSET_MRC_SEED_S3); /* Save a simple checksum of the seed values */ c1 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed, sizeof(u32)); c2 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed_s3, sizeof(u32)); checksum = add_ip_checksums(sizeof(u32), c1, c2); cmos_write((checksum >> 0) & 0xff, CMOS_OFFSET_MRC_SEED_CHK); cmos_write((checksum >> 8) & 0xff, CMOS_OFFSET_MRC_SEED_CHK + 1); } static void prepare_mrc_cache(struct pei_data *pei_data) { u16 c1, c2, checksum, seed_checksum; size_t mrc_size; /* Preset just in case there is an error */ pei_data->mrc_input = NULL; pei_data->mrc_input_len = 0; /* Read scrambler seeds from CMOS */ pei_data->scrambler_seed = cmos_read32(CMOS_OFFSET_MRC_SEED); printk(BIOS_DEBUG, "Read scrambler seed 0x%08x from CMOS 0x%02x\n", pei_data->scrambler_seed, CMOS_OFFSET_MRC_SEED); pei_data->scrambler_seed_s3 = cmos_read32(CMOS_OFFSET_MRC_SEED_S3); printk(BIOS_DEBUG, "Read S3 scrambler seed 0x%08x from CMOS 0x%02x\n", pei_data->scrambler_seed_s3, CMOS_OFFSET_MRC_SEED_S3); /* Compute seed checksum and compare */ c1 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed, sizeof(u32)); c2 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed_s3, sizeof(u32)); checksum = add_ip_checksums(sizeof(u32), c1, c2); seed_checksum = cmos_read(CMOS_OFFSET_MRC_SEED_CHK); seed_checksum |= cmos_read(CMOS_OFFSET_MRC_SEED_CHK + 1) << 8; if (checksum != seed_checksum) { printk(BIOS_ERR, "%s: invalid seed checksum\n", __func__); pei_data->scrambler_seed = 0; pei_data->scrambler_seed_s3 = 0; return; } pei_data->mrc_input = mrc_cache_current_mmap_leak(MRC_TRAINING_DATA, MRC_CACHE_VERSION, &mrc_size); if (!pei_data->mrc_input) { /* Error message printed in find_current_mrc_cache */ return; } pei_data->mrc_input_len = mrc_size; printk(BIOS_DEBUG, "%s: at %p, size %zx\n", __func__, pei_data->mrc_input, mrc_size); } /** * Find PEI executable in coreboot filesystem and execute it. * * @param pei_data: configuration data for UEFI PEI reference code */ static void sdram_initialize(struct pei_data *pei_data) { int (*entry)(struct pei_data *pei_data) __attribute__((regparm(1))); /* Wait for ME to be ready */ intel_early_me_init(); intel_early_me_uma_size(); printk(BIOS_DEBUG, "Starting UEFI PEI System Agent\n"); /* * Always pass in mrc_cache data. The driver will determine * whether to use the data or not. */ prepare_mrc_cache(pei_data); /* If MRC data is not found we cannot continue S3 resume. */ if (pei_data->boot_mode == 2 && !pei_data->mrc_input) { printk(BIOS_DEBUG, "Giving up in %s: No MRC data\n", __func__); system_reset(); } /* Pass console handler in pei_data */ pei_data->tx_byte = do_putchar; /* Locate and call UEFI System Agent binary. */ entry = cbfs_map("mrc.bin", NULL); if (entry) { int rv; rv = entry (pei_data); if (rv) { switch (rv) { case -1: printk(BIOS_ERR, "PEI version mismatch.\n"); break; case -2: printk(BIOS_ERR, "Invalid memory frequency.\n"); break; default: printk(BIOS_ERR, "MRC returned %x.\n", rv); } die_with_post_code(POST_INVALID_VENDOR_BINARY, "Nonzero MRC return value.\n"); } } else { die("UEFI PEI System Agent not found.\n"); } /* mrc.bin reconfigures USB, so reinit it to have debug */ if (CONFIG(USBDEBUG_IN_PRE_RAM)) usbdebug_hw_init(true); /* Print the MRC version after executing the UEFI PEI stage */ u32 version = mchbar_read32(MRC_REVISION); printk(BIOS_DEBUG, "MRC Version %u.%u.%u Build %u\n", (version >> 24) & 0xff, (version >> 16) & 0xff, (version >> 8) & 0xff, (version >> 0) & 0xff); /* * Send ME init done for SandyBridge here. * This is done inside the SystemAgent binary on IvyBridge. */ if (BASE_REV_SNB == (pci_read_config16(PCI_CPU_DEVICE, PCI_DEVICE_ID) & BASE_REV_MASK)) intel_early_me_init_done(ME_INIT_STATUS_SUCCESS); else intel_early_me_status(); report_memory_config(); } /* * These are the location and structure of MRC_VAR data in CAR. * The CAR region looks like this: * +------------------+ -> DCACHE_RAM_BASE * | | * | | * | COREBOOT STACK | * | | * | | * +------------------+ -> DCACHE_RAM_BASE + DCACHE_RAM_SIZE * | | * | MRC HEAP | * | size = 0x5000 | * | | * +------------------+ * | | * | MRC VAR | * | size = 0x4000 | * | | * +------------------+ -> DACHE_RAM_BASE + DACHE_RAM_SIZE * + DCACHE_RAM_MRC_VAR_SIZE */ #define DCACHE_RAM_MRC_VAR_BASE (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE \ + CONFIG_DCACHE_RAM_MRC_VAR_SIZE - 0x4000) struct mrc_var_data { u32 acpi_timer_flag; u32 pool_used; u32 pool_base; u32 tx_byte; u32 reserved[4]; } __packed; static void northbridge_fill_pei_data(struct pei_data *pei_data) { pei_data->mchbar = CONFIG_FIXED_MCHBAR_MMIO_BASE; pei_data->dmibar = CONFIG_FIXED_DMIBAR_MMIO_BASE; pei_data->epbar = CONFIG_FIXED_EPBAR_MMIO_BASE; pei_data->pciexbar = CONFIG_ECAM_MMCONF_BASE_ADDRESS; pei_data->hpet_address = HPET_BASE_ADDRESS; pei_data->thermalbase = 0xfed08000; pei_data->system_type = !(get_platform_type() == PLATFORM_MOBILE); pei_data->tseg_size = CONFIG_SMM_TSEG_SIZE; if ((cpu_get_cpuid() & 0xffff0) == 0x306a0) { const struct device *dev = pcidev_on_root(1, 0); pei_data->pcie_init = dev && dev->enabled; } else { pei_data->pcie_init = 0; } } static void southbridge_fill_pei_data(struct pei_data *pei_data) { const struct device *dev = pcidev_on_root(0x19, 0); pei_data->smbusbar = CONFIG_FIXED_SMBUS_IO_BASE; pei_data->wdbbar = 0x04000000; pei_data->wdbsize = 0x1000; pei_data->rcba = (uintptr_t)DEFAULT_RCBA; pei_data->pmbase = DEFAULT_PMBASE; pei_data->gpiobase = DEFAULT_GPIOBASE; pei_data->gbe_enable = dev && dev->enabled; } static void devicetree_fill_pei_data(struct pei_data *pei_data) { const struct northbridge_intel_sandybridge_config *cfg; const struct device *dev = pcidev_on_root(0, 0); if (!dev || !dev->chip_info) return; cfg = dev->chip_info; switch (cfg->max_mem_clock_mhz) { /* MRC only supports fixed numbers of frequencies */ default: printk(BIOS_WARNING, "RAMINIT: Limiting DDR3 clock to 800 Mhz\n"); __fallthrough; case 400: pei_data->max_ddr3_freq = 800; break; case 533: pei_data->max_ddr3_freq = 1066; break; case 666: pei_data->max_ddr3_freq = 1333; break; case 800: pei_data->max_ddr3_freq = 1600; break; } memcpy(pei_data->spd_addresses, cfg->spd_addresses, sizeof(pei_data->spd_addresses)); memcpy(pei_data->ts_addresses, cfg->ts_addresses, sizeof(pei_data->ts_addresses)); pei_data->ec_present = cfg->ec_present; pei_data->ddr3lv_support = cfg->ddr3lv_support; pei_data->nmode = cfg->nmode; pei_data->ddr_refresh_rate_config = cfg->ddr_refresh_rate_config; memcpy(pei_data->usb_port_config, cfg->usb_port_config, sizeof(pei_data->usb_port_config)); pei_data->usb3.mode = cfg->usb3.mode; pei_data->usb3.hs_port_switch_mask = cfg->usb3.hs_port_switch_mask; pei_data->usb3.preboot_support = cfg->usb3.preboot_support; pei_data->usb3.xhci_streams = cfg->usb3.xhci_streams; } static void disable_p2p(void) { /* Disable PCI-to-PCI bridge early to prevent probing by MRC */ const struct device *const p2p = pcidev_on_root(0x1e, 0); if (p2p && p2p->enabled) return; RCBA32(FD) |= PCH_DISABLE_P2P; } static void setup_sdram_meminfo(struct pei_data *pei_data); void perform_raminit(int s3resume) { struct pei_data pei_data; struct mrc_var_data *mrc_var; /* Prepare USB controller early in S3 resume */ if (s3resume) enable_usb_bar(); memset(&pei_data, 0, sizeof(pei_data)); pei_data.pei_version = PEI_VERSION; northbridge_fill_pei_data(&pei_data); southbridge_fill_pei_data(&pei_data); devicetree_fill_pei_data(&pei_data); mainboard_fill_pei_data(&pei_data); post_code(0x3a); /* Fill after mainboard_fill_pei_data as it might provide spd_data */ pei_data.dimm_channel0_disabled = (!pei_data.spd_addresses[0] && !pei_data.spd_data[0][0]) + (!pei_data.spd_addresses[1] && !pei_data.spd_data[1][0]) * 2; pei_data.dimm_channel1_disabled = (!pei_data.spd_addresses[2] && !pei_data.spd_data[2][0]) + (!pei_data.spd_addresses[3] && !pei_data.spd_data[3][0]) * 2; /* Fix spd_data. MRC only uses spd_data[0] and ignores the other */ for (size_t i = 1; i < ARRAY_SIZE(pei_data.spd_data); i++) { if (pei_data.spd_data[i][0] && !pei_data.spd_data[0][0]) { memcpy(pei_data.spd_data[0], pei_data.spd_data[i], sizeof(pei_data.spd_data[0])); } else if (pei_data.spd_data[i][0] && pei_data.spd_data[0][0]) { if (memcmp(pei_data.spd_data[i], pei_data.spd_data[0], sizeof(pei_data.spd_data[0])) != 0) die("Onboard SPDs must match each other"); } } disable_p2p(); pei_data.boot_mode = s3resume ? 2 : 0; timestamp_add_now(TS_INITRAM_START); sdram_initialize(&pei_data); timestamp_add_now(TS_INITRAM_END); /* Sanity check mrc_var location by verifying a known field */ mrc_var = (void *)DCACHE_RAM_MRC_VAR_BASE; if (mrc_var->tx_byte == (uintptr_t)pei_data.tx_byte) { printk(BIOS_DEBUG, "MRC_VAR pool occupied [%08x,%08x]\n", mrc_var->pool_base, mrc_var->pool_base + mrc_var->pool_used); } else { printk(BIOS_ERR, "Could not parse MRC_VAR data\n"); hexdump(mrc_var, sizeof(*mrc_var)); } const int cbmem_was_initted = !cbmem_recovery(s3resume); if (!s3resume) save_mrc_data(&pei_data); if (s3resume && !cbmem_was_initted) { /* Failed S3 resume, reset to come up cleanly */ system_reset(); } setup_sdram_meminfo(&pei_data); } static void setup_sdram_meminfo(struct pei_data *pei_data) { u32 addr_decode_ch[2]; struct memory_info *mem_info; struct dimm_info *dimm; int dimm_size; int i; int dimm_cnt = 0; mem_info = cbmem_add(CBMEM_ID_MEMINFO, sizeof(struct memory_info)); memset(mem_info, 0, sizeof(struct memory_info)); addr_decode_ch[0] = mchbar_read32(MAD_DIMM_CH0); addr_decode_ch[1] = mchbar_read32(MAD_DIMM_CH1); const int refclk = mchbar_read32(MC_BIOS_REQ) & 0x100 ? 100 : 133; const int ddr_frequency = (mchbar_read32(MC_BIOS_DATA) * refclk * 100 * 2 + 50) / 100; for (i = 0; i < ARRAY_SIZE(addr_decode_ch); i++) { u32 ch_conf = addr_decode_ch[i]; /* DIMM-A */ dimm_size = ((ch_conf >> 0) & 0xff) * 256; if (dimm_size) { dimm = &mem_info->dimm[dimm_cnt]; dimm->dimm_size = dimm_size; dimm->ddr_type = MEMORY_TYPE_DDR3; dimm->ddr_frequency = ddr_frequency; dimm->rank_per_dimm = 1 + ((ch_conf >> 17) & 1); dimm->channel_num = i; dimm->dimm_num = 0; dimm->bank_locator = i * 2; memcpy(dimm->serial, /* bytes 122-125 */ &pei_data->spd_data[0][SPD_DIMM_SERIAL_NUM], sizeof(uint8_t) * SPD_DIMM_SERIAL_LEN); memcpy(dimm->module_part_number, /* bytes 128-145 */ &pei_data->spd_data[0][SPD_DIMM_PART_NUM], sizeof(uint8_t) * SPD_DIMM_PART_LEN); dimm->mod_id = /* bytes 117/118 */ (pei_data->spd_data[0][SPD_DIMM_MOD_ID2] << 8) | (pei_data->spd_data[0][SPD_DIMM_MOD_ID1] & 0xFF); dimm->mod_type = SPD_DDR3_DIMM_TYPE_SO_DIMM; dimm->bus_width = MEMORY_BUS_WIDTH_64; dimm_cnt++; } /* DIMM-B */ dimm_size = ((ch_conf >> 8) & 0xff) * 256; if (dimm_size) { dimm = &mem_info->dimm[dimm_cnt]; dimm->dimm_size = dimm_size; dimm->ddr_type = MEMORY_TYPE_DDR3; dimm->ddr_frequency = ddr_frequency; dimm->rank_per_dimm = 1 + ((ch_conf >> 18) & 1); dimm->channel_num = i; dimm->dimm_num = 1; dimm->bank_locator = i * 2; memcpy(dimm->serial, /* bytes 122-125 */ &pei_data->spd_data[0][SPD_DIMM_SERIAL_NUM], sizeof(uint8_t) * SPD_DIMM_SERIAL_LEN); memcpy(dimm->module_part_number, /* bytes 128-145 */ &pei_data->spd_data[0][SPD_DIMM_PART_NUM], sizeof(uint8_t) * SPD_DIMM_PART_LEN); dimm->mod_id = /* bytes 117/118 */ (pei_data->spd_data[0][SPD_DIMM_MOD_ID2] << 8) | (pei_data->spd_data[0][SPD_DIMM_MOD_ID1] & 0xFF); dimm->mod_type = SPD_DDR3_DIMM_TYPE_SO_DIMM; dimm->bus_width = MEMORY_BUS_WIDTH_64; dimm_cnt++; } } mem_info->dimm_cnt = dimm_cnt; }