/* SPDX-License-Identifier: GPL-2.0-only */ #include #include #include #include #include #include #include #include #include #include #include #include #include "raminit.h" #include "i945.h" #include "chip.h" #include #include /* Debugging macros. */ #if CONFIG(DEBUG_RAM_SETUP) #define PRINTK_DEBUG(x...) printk(BIOS_DEBUG, x) #else #define PRINTK_DEBUG(x...) #endif #define RAM_INITIALIZATION_COMPLETE (1 << 19) #define RAM_COMMAND_SELF_REFRESH (0x0 << 16) #define RAM_COMMAND_NOP (0x1 << 16) #define RAM_COMMAND_PRECHARGE (0x2 << 16) #define RAM_COMMAND_MRS (0x3 << 16) #define RAM_COMMAND_EMRS (0x4 << 16) #define RAM_COMMAND_CBR (0x6 << 16) #define RAM_COMMAND_NORMAL (0x7 << 16) #define RAM_EMRS_1 (0x0 << 21) #define RAM_EMRS_2 (0x1 << 21) #define RAM_EMRS_3 (0x2 << 21) #define DEFAULT_PCI_MMIO_SIZE 768 static int get_dimm_spd_address(struct sys_info *sysinfo, int device) { if (sysinfo->spd_addresses) return sysinfo->spd_addresses[device]; else return 0x50 + device; } static __attribute__((noinline)) void do_ram_command(u32 command) { u32 reg32; reg32 = mchbar_read32(DCC); reg32 &= ~((3 << 21) | (1 << 20) | (1 << 19) | (7 << 16)); reg32 |= command; /* Also set Init Complete */ if (command == RAM_COMMAND_NORMAL) reg32 |= RAM_INITIALIZATION_COMPLETE; PRINTK_DEBUG(" Sending RAM command 0x%08x", reg32); mchbar_write32(DCC, reg32); /* This is the actual magic */ PRINTK_DEBUG("...done\n"); udelay(1); } static void ram_read32(u32 offset) { PRINTK_DEBUG(" RAM read: %08x\n", offset); read32((void *)offset); } void sdram_dump_mchbar_registers(void) { int i; printk(BIOS_DEBUG, "Dumping MCHBAR Registers\n"); for (i = 0; i < 0xfff; i += 4) { if (mchbar_read32(i) == 0) continue; printk(BIOS_DEBUG, "0x%04x: 0x%08x\n", i, mchbar_read32(i)); } } static int memclk(void) { int offset = CONFIG(NORTHBRIDGE_INTEL_SUBTYPE_I945GM) ? 1 : 0; switch (((mchbar_read32(CLKCFG) >> 4) & 7) - offset) { case 1: return 400; case 2: return 533; case 3: return 667; default: printk(BIOS_DEBUG, "%s: unknown register value %x\n", __func__, ((mchbar_read32(CLKCFG) >> 4) & 7) - offset); } return -1; } static u16 fsbclk(void) { if (CONFIG(NORTHBRIDGE_INTEL_SUBTYPE_I945GM)) { switch (mchbar_read32(CLKCFG) & 7) { case 0: return 400; case 1: return 533; case 3: return 667; default: printk(BIOS_DEBUG, "%s: unknown register value %x\n", __func__, mchbar_read32(CLKCFG) & 7); } return 0xffff; } else if (CONFIG(NORTHBRIDGE_INTEL_SUBTYPE_I945GC)) { switch (mchbar_read32(CLKCFG) & 7) { case 0: return 1066; case 1: return 533; case 2: return 800; default: printk(BIOS_DEBUG, "%s: unknown register value %x\n", __func__, mchbar_read32(CLKCFG) & 7); } return 0xffff; } } static int sdram_capabilities_max_supported_memory_frequency(void) { u32 reg32; #if CONFIG_MAXIMUM_SUPPORTED_FREQUENCY return CONFIG_MAXIMUM_SUPPORTED_FREQUENCY; #endif reg32 = pci_read_config32(HOST_BRIDGE, 0xe4); /* CAPID0 + 4 */ reg32 &= (7 << 0); switch (reg32) { case 4: return 400; case 3: return 533; case 2: return 667; } /* Newer revisions of this chipset rather support faster memory clocks, * so if it's a reserved value, return the fastest memory clock that we * know of and can handle */ return 667; } /** * @brief determine whether chipset is capable of dual channel interleaved mode * * @return 1 if interleaving is supported, 0 otherwise */ static int sdram_capabilities_interleave(void) { u32 reg32; reg32 = pci_read_config32(HOST_BRIDGE, 0xe4); /* CAPID0 + 4 */ reg32 >>= 25; reg32 &= 1; return (!reg32); } /** * @brief determine whether chipset is capable of two memory channels * * @return 1 if dual channel operation is supported, 0 otherwise */ static int sdram_capabilities_dual_channel(void) { u32 reg32; reg32 = pci_read_config32(HOST_BRIDGE, 0xe4); /* CAPID0 + 4 */ reg32 >>= 24; reg32 &= 1; return (!reg32); } static int sdram_capabilities_enhanced_addressing_xor(void) { u8 reg8; reg8 = pci_read_config8(HOST_BRIDGE, 0xe5); /* CAPID0 + 5 */ reg8 &= (1 << 7); return (!reg8); } #define GFX_FREQUENCY_CAP_166MHZ 0x04 #define GFX_FREQUENCY_CAP_200MHZ 0x03 #define GFX_FREQUENCY_CAP_250MHZ 0x02 #define GFX_FREQUENCY_CAP_ALL 0x00 static int sdram_capabilities_core_frequencies(void) { u8 reg8; reg8 = pci_read_config8(HOST_BRIDGE, 0xe5); /* CAPID0 + 5 */ reg8 &= (1 << 3) | (1 << 2) | (1 << 1); reg8 >>= 1; return reg8; } static void sdram_detect_errors(struct sys_info *sysinfo) { u8 reg8; u8 do_reset = 0; reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_2); if (reg8 & ((1 << 7) | (1 << 2))) { if (reg8 & (1 << 2)) { printk(BIOS_DEBUG, "SLP S4# Assertion Width Violation.\n"); /* Write back clears bit 2 */ pci_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_2, reg8); do_reset = 1; } if (reg8 & (1 << 7)) { printk(BIOS_DEBUG, "DRAM initialization was interrupted.\n"); reg8 &= ~(1 << 7); pci_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_2, reg8); do_reset = 1; } /* Set SLP_S3# Assertion Stretch Enable */ reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3); reg8 |= (1 << 3); pci_write_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3, reg8); if (do_reset) { printk(BIOS_DEBUG, "Reset required.\n"); full_reset(); } } /* Set DRAM initialization bit in ICH7 */ pci_or_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_2, 1 << 7); /* clear self refresh status if check is disabled or not a resume */ if (!CONFIG(CHECK_SLFRCS_ON_RESUME) || sysinfo->boot_path != BOOT_PATH_RESUME) { mchbar_setbits8(SLFRCS, 3); } else { /* Validate self refresh config */ if (((sysinfo->dimm[0] != SYSINFO_DIMM_NOT_POPULATED) || (sysinfo->dimm[1] != SYSINFO_DIMM_NOT_POPULATED)) && !(mchbar_read8(SLFRCS) & (1 << 0))) { do_reset = 1; } if (((sysinfo->dimm[2] != SYSINFO_DIMM_NOT_POPULATED) || (sysinfo->dimm[3] != SYSINFO_DIMM_NOT_POPULATED)) && !(mchbar_read8(SLFRCS) & (1 << 1))) { do_reset = 1; } } if (do_reset) { printk(BIOS_DEBUG, "Reset required.\n"); full_reset(); } } struct timings { u32 min_tCLK_cas[8]; u32 min_tRAS; u32 min_tRP; u32 min_tRCD; u32 min_tWR; u32 min_tRFC; u32 max_tRR; u8 cas_mask; }; /** * @brief loop over dimms and save maximal timings */ static void gather_common_timing(struct sys_info *sysinfo, struct timings *saved_timings) { int i, j; u8 raw_spd[SPD_SIZE_MAX_DDR2]; u8 dimm_mask = 0; memset(saved_timings, 0, sizeof(*saved_timings)); saved_timings->max_tRR = UINT32_MAX; saved_timings->cas_mask = SPD_CAS_LATENCY_DDR2_3 | SPD_CAS_LATENCY_DDR2_4 | SPD_CAS_LATENCY_DDR2_5; /** * i945 supports two DIMMs, in two configurations: * * - single channel with two DIMMs * - dual channel with one DIMM per channel * * In practice dual channel mainboards have their SPD at 0x50/0x52 * whereas single channel configurations have their SPD at 0x50/0x51. * * The capability register knows a lot about the channel configuration * but for now we stick with the information we gather via SPD. */ printk(BIOS_DEBUG, "This mainboard supports "); if (sdram_capabilities_dual_channel()) { sysinfo->dual_channel = 1; printk(BIOS_DEBUG, "Dual Channel Operation.\n"); } else { sysinfo->dual_channel = 0; printk(BIOS_DEBUG, "only Single Channel Operation.\n"); } for (i = 0; i < (2 * DIMM_SOCKETS); i++) { int device = get_dimm_spd_address(sysinfo, i), bytes_read; struct dimm_attr_ddr2_st dimm_info; /* Initialize the socket information with a sane value */ sysinfo->dimm[i] = SYSINFO_DIMM_NOT_POPULATED; /* Dual Channel not supported, but Channel 1? Bail out */ if (!sdram_capabilities_dual_channel() && (i >> 1)) continue; if (smbus_read_byte(device, SPD_MEMORY_TYPE) != SPD_MEMORY_TYPE_SDRAM_DDR2) { printk(BIOS_DEBUG, "DDR II Channel %d Socket %d: N/A\n", (i >> 1), (i & 1)); continue; } /* * spd_decode_ddr2() needs a 128-byte sized array but * only the first 64 bytes contain data needed for raminit. */ bytes_read = i2c_eeprom_read(device, 0, 64, raw_spd); printk(BIOS_DEBUG, "Reading SPD using i2c block operation.\n"); if (CONFIG(DEBUG_RAM_SETUP) && bytes_read > 0) hexdump(raw_spd, bytes_read); if (bytes_read != 64) { /* Try again with SMBUS byte read */ printk(BIOS_DEBUG, "i2c block operation failed," " trying smbus byte operation.\n"); for (j = 0; j < 64; j++) raw_spd[j] = smbus_read_byte(device, j); if (CONFIG(DEBUG_RAM_SETUP)) hexdump(raw_spd, 64); } if (spd_decode_ddr2(&dimm_info, raw_spd) != SPD_STATUS_OK) { printk(BIOS_WARNING, "Encountered problems with SPD, " "skipping this DIMM.\n"); continue; } if (CONFIG(DEBUG_RAM_SETUP)) dram_print_spd_ddr2(&dimm_info); if (dimm_info.flags.is_ecc) die("\nError: ECC memory not supported by this chipset\n"); if (spd_dimm_is_registered_ddr2(dimm_info.dimm_type)) die("\nError: Registered memory not supported by this chipset\n"); printk(BIOS_DEBUG, "DDR II Channel %d Socket %d: ", (i >> 1), (i & 1)); /** * There are 5 different possible populations for a DIMM socket: * 0. x16 double ranked (X16DS) * 1. x8 double ranked (X8DS) * 2. x16 single ranked (X16SS) * 3. x8 double stacked (X8DDS) * 4. Unpopulated */ switch (dimm_info.width) { case 8: switch (dimm_info.ranks) { case 2: printk(BIOS_DEBUG, "x8DDS\n"); sysinfo->dimm[i] = SYSINFO_DIMM_X8DDS; break; case 1: printk(BIOS_DEBUG, "x8DS\n"); sysinfo->dimm[i] = SYSINFO_DIMM_X8DS; break; default: printk(BIOS_DEBUG, "Unsupported.\n"); } break; case 16: switch (dimm_info.ranks) { case 2: printk(BIOS_DEBUG, "x16DS\n"); sysinfo->dimm[i] = SYSINFO_DIMM_X16DS; break; case 1: printk(BIOS_DEBUG, "x16SS\n"); sysinfo->dimm[i] = SYSINFO_DIMM_X16SS; break; default: printk(BIOS_DEBUG, "Unsupported.\n"); } break; default: die("Unsupported DDR-II memory width.\n"); } /* Is the current DIMM a stacked DIMM? */ if (dimm_info.flags.stacked) sysinfo->package = SYSINFO_PACKAGE_STACKED; if (!dimm_info.flags.bl8) die("Only DDR-II RAM with burst length 8 is supported.\n"); if (dimm_info.ranksize_mb < 128) die("DDR-II rank size smaller than 128MB is not supported.\n"); sysinfo->banksize[i * 2] = dimm_info.ranksize_mb / 32; printk(BIOS_DEBUG, "DIMM %d side 0 = %d MB\n", i, sysinfo->banksize[i * 2] * 32); if (dimm_info.ranks == 2) { sysinfo->banksize[(i * 2) + 1] = dimm_info.ranksize_mb / 32; printk(BIOS_DEBUG, "DIMM %d side 1 = %d MB\n", i, sysinfo->banksize[(i * 2) + 1] * 32); } sysinfo->rows[i] = dimm_info.row_bits; sysinfo->cols[i] = dimm_info.col_bits; sysinfo->banks[i] = dimm_info.banks; /* int min_tRAS, min_tRP, min_tRCD, min_tWR, min_tRFC; */ saved_timings->min_tRAS = MAX(saved_timings->min_tRAS, dimm_info.tRAS); saved_timings->min_tRP = MAX(saved_timings->min_tRP, dimm_info.tRP); saved_timings->min_tRCD = MAX(saved_timings->min_tRCD, dimm_info.tRCD); saved_timings->min_tWR = MAX(saved_timings->min_tWR, dimm_info.tWR); saved_timings->min_tRFC = MAX(saved_timings->min_tRFC, dimm_info.tRFC); saved_timings->max_tRR = MIN(saved_timings->max_tRR, dimm_info.tRR); saved_timings->cas_mask &= dimm_info.cas_supported; for (j = 0; j < 8; j++) { if (!(saved_timings->cas_mask & (1 << j))) saved_timings->min_tCLK_cas[j] = 0; else saved_timings->min_tCLK_cas[j] = MAX(dimm_info.cycle_time[j], saved_timings->min_tCLK_cas[j]); } dimm_mask |= (1 << i); } if (!dimm_mask) die("No memory installed.\n"); if (!(dimm_mask & ((1 << DIMM_SOCKETS) - 1))) /* FIXME: Possibly does not boot in this case */ printk(BIOS_INFO, "Channel 0 has no memory populated.\n"); } static void choose_tclk(struct sys_info *sysinfo, struct timings *saved_timings) { u32 ctrl_min_tclk; int try_cas; ctrl_min_tclk = 2 * 256 * 1000 / sdram_capabilities_max_supported_memory_frequency(); normalize_tck(&ctrl_min_tclk); try_cas = spd_get_msbs(saved_timings->cas_mask); while (saved_timings->cas_mask & (1 << try_cas) && try_cas > 0) { sysinfo->cas = try_cas; sysinfo->tclk = saved_timings->min_tCLK_cas[try_cas]; if (sysinfo->tclk >= ctrl_min_tclk && saved_timings->min_tCLK_cas[try_cas] != saved_timings->min_tCLK_cas[try_cas - 1]) break; try_cas--; } normalize_tck(&sysinfo->tclk); if ((sysinfo->cas < 3) || (sysinfo->tclk == 0)) die("Could not find common memory frequency and CAS\n"); /* * The loop can still results in a timing too fast for the * memory controller. */ if (sysinfo->tclk < ctrl_min_tclk) sysinfo->tclk = ctrl_min_tclk; switch (sysinfo->tclk) { case TCK_200MHZ: sysinfo->memory_frequency = 400; break; case TCK_266MHZ: sysinfo->memory_frequency = 533; break; case TCK_333MHZ: sysinfo->memory_frequency = 667; break; } printk(BIOS_DEBUG, "Memory will be driven at %dMT with CAS=%d clocks\n", sysinfo->memory_frequency, sysinfo->cas); } static void derive_timings(struct sys_info *sysinfo, struct timings *saved_timings) { sysinfo->tras = DIV_ROUND_UP(saved_timings->min_tRAS, sysinfo->tclk); if (sysinfo->tras > 0x18) die("DDR-II Module does not support this frequency (tRAS error)\n"); sysinfo->trp = DIV_ROUND_UP(saved_timings->min_tRP, sysinfo->tclk); if (sysinfo->trp > 6) die("DDR-II Module does not support this frequency (tRP error)\n"); sysinfo->trcd = DIV_ROUND_UP(saved_timings->min_tRCD, sysinfo->tclk); if (sysinfo->trcd > 6) die("DDR-II Module does not support this frequency (tRCD error)\n"); sysinfo->twr = DIV_ROUND_UP(saved_timings->min_tWR, sysinfo->tclk); if (sysinfo->twr > 5) die("DDR-II Module does not support this frequency (tWR error)\n"); sysinfo->trfc = DIV_ROUND_UP(saved_timings->min_tRFC, sysinfo->tclk); printk(BIOS_DEBUG, "tRAS = %d cycles\n", sysinfo->tras); printk(BIOS_DEBUG, "tRP = %d cycles\n", sysinfo->trp); printk(BIOS_DEBUG, "tRCD = %d cycles\n", sysinfo->trcd); printk(BIOS_DEBUG, "tWR = %d cycles\n", sysinfo->twr); printk(BIOS_DEBUG, "tRFC = %d cycles\n", sysinfo->trfc); /* Refresh is slower than 15.6us, use 15.6us */ /* tRR is decoded in units of 1/256us */ #define T_RR_7_8US 2000000 #define T_RR_15_6US 4000000 #define REFRESH_7_8US 1 #define REFRESH_15_6US 0 if (saved_timings->max_tRR < T_RR_7_8US) die("DDR-II module has unsupported refresh value\n"); else if (saved_timings->max_tRR < T_RR_15_6US) sysinfo->refresh = REFRESH_7_8US; else sysinfo->refresh = REFRESH_15_6US; printk(BIOS_DEBUG, "Refresh: %s\n", sysinfo->refresh ? "7.8us" : "15.6us"); } /** * @brief Get generic DIMM parameters. * @param sysinfo Central memory controller information structure * * This function gathers several pieces of information for each system DIMM: * o DIMM width (x8 / x16) * o DIMM rank (single ranked / dual ranked) * * Also, some non-supported scenarios are detected. */ static void sdram_get_dram_configuration(struct sys_info *sysinfo) { struct timings saved_timings; gather_common_timing(sysinfo, &saved_timings); choose_tclk(sysinfo, &saved_timings); derive_timings(sysinfo, &saved_timings); } static void sdram_program_dram_width(struct sys_info *sysinfo) { u16 c0dramw = 0, c1dramw = 0; int i, idx; if (sysinfo->dual_channel) idx = 2; else idx = 1; for (i = 0; i < DIMM_SOCKETS; i++) { /* Channel 0 */ switch (sysinfo->dimm[i]) { case SYSINFO_DIMM_X16DS: c0dramw |= (0x0000) << 4 * (i % 2); break; case SYSINFO_DIMM_X8DS: c0dramw |= (0x0001) << 4 * (i % 2); break; case SYSINFO_DIMM_X16SS: c0dramw |= (0x0000) << 4 * (i % 2); break; case SYSINFO_DIMM_X8DDS: c0dramw |= (0x0005) << 4 * (i % 2); break; case SYSINFO_DIMM_NOT_POPULATED: c0dramw |= (0x0000) << 4 * (i % 2); break; } } for (i = DIMM_SOCKETS; i < idx * DIMM_SOCKETS; i++) { /* Channel 1 */ switch (sysinfo->dimm[i]) { case SYSINFO_DIMM_X16DS: c1dramw |= (0x0000) << 4 * (i % 2); break; case SYSINFO_DIMM_X8DS: c1dramw |= (0x0010) << 4 * (i % 2); break; case SYSINFO_DIMM_X16SS: c1dramw |= (0x0000) << 4 * (i % 2); break; case SYSINFO_DIMM_X8DDS: c1dramw |= (0x0050) << 4 * (i % 2); break; case SYSINFO_DIMM_NOT_POPULATED: c1dramw |= (0x0000) << 4 * (i % 2); break; } } mchbar_write16(C0DRAMW, c0dramw); mchbar_write16(C1DRAMW, c1dramw); } static void sdram_write_slew_rates(u32 offset, const u32 *slew_rate_table) { int i; for (i = 0; i < 16; i++) mchbar_write32(offset + (i * 4), slew_rate_table[i]); } static const u32 dq2030[] = { 0x08070706, 0x0a090908, 0x0d0c0b0a, 0x12100f0e, 0x1a181614, 0x22201e1c, 0x2a282624, 0x3934302d, 0x0a090908, 0x0c0b0b0a, 0x0e0d0d0c, 0x1211100f, 0x19171513, 0x211f1d1b, 0x2d292623, 0x3f393531 }; static const u32 dq2330[] = { 0x08070706, 0x0a090908, 0x0d0c0b0a, 0x12100f0e, 0x1a181614, 0x22201e1c, 0x2a282624, 0x3934302d, 0x0a090908, 0x0c0b0b0a, 0x0e0d0d0c, 0x1211100f, 0x19171513, 0x211f1d1b, 0x2d292623, 0x3f393531 }; static const u32 cmd2710[] = { 0x07060605, 0x0f0d0b09, 0x19171411, 0x1f1f1d1b, 0x1f1f1f1f, 0x1f1f1f1f, 0x1f1f1f1f, 0x1f1f1f1f, 0x1110100f, 0x0f0d0b09, 0x19171411, 0x1f1f1d1b, 0x1f1f1f1f, 0x1f1f1f1f, 0x1f1f1f1f, 0x1f1f1f1f }; static const u32 cmd3210[] = { 0x0f0d0b0a, 0x17151311, 0x1f1d1b19, 0x1f1f1f1f, 0x1f1f1f1f, 0x1f1f1f1f, 0x1f1f1f1f, 0x1f1f1f1f, 0x18171615, 0x1f1f1c1a, 0x1f1f1f1f, 0x1f1f1f1f, 0x1f1f1f1f, 0x1f1f1f1f, 0x1f1f1f1f, 0x1f1f1f1f }; static const u32 clk2030[] = { 0x0e0d0d0c, 0x100f0f0e, 0x100f0e0d, 0x15131211, 0x1d1b1917, 0x2523211f, 0x2a282927, 0x32302e2c, 0x17161514, 0x1b1a1918, 0x1f1e1d1c, 0x23222120, 0x27262524, 0x2d2b2928, 0x3533312f, 0x3d3b3937 }; static const u32 ctl3215[] = { 0x01010000, 0x03020101, 0x07060504, 0x0b0a0908, 0x100f0e0d, 0x14131211, 0x18171615, 0x1c1b1a19, 0x05040403, 0x07060605, 0x0a090807, 0x0f0d0c0b, 0x14131211, 0x18171615, 0x1c1b1a19, 0x201f1e1d }; static const u32 ctl3220[] = { 0x05040403, 0x07060505, 0x0e0c0a08, 0x1a171411, 0x2825221f, 0x35322f2b, 0x3e3e3b38, 0x3e3e3e3e, 0x09080807, 0x0b0a0a09, 0x0f0d0c0b, 0x1b171311, 0x2825221f, 0x35322f2b, 0x3e3e3b38, 0x3e3e3e3e }; static const u32 nc[] = { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 }; enum { DQ2030, DQ2330, CMD2710, CMD3210, CLK2030, CTL3215, CTL3220, NC, }; static const u8 dual_channel_slew_group_lookup[] = { DQ2030, CMD3210, CTL3215, CTL3215, CLK2030, CLK2030, DQ2030, CMD3210, DQ2030, CMD3210, CTL3215, CTL3215, CLK2030, CLK2030, DQ2030, CMD3210, DQ2030, CMD3210, NC, CTL3215, NC, CLK2030, DQ2030, CMD3210, DQ2030, CMD3210, CTL3215, CTL3215, CLK2030, CLK2030, DQ2030, CMD2710, DQ2030, CMD3210, NC, CTL3215, NC, CLK2030, NC, NC, DQ2030, CMD3210, CTL3215, CTL3215, CLK2030, CLK2030, DQ2030, CMD3210, DQ2030, CMD3210, CTL3215, NC, CLK2030, NC, DQ2030, CMD3210, DQ2030, CMD3210, CTL3215, CTL3215, CLK2030, CLK2030, DQ2030, CMD3210, DQ2030, CMD3210, CTL3215, NC, CLK2030, NC, DQ2030, CMD2710, DQ2030, CMD3210, CTL3215, NC, CLK2030, NC, NC, NC, DQ2030, CMD3210, NC, CTL3215, NC, CLK2030, DQ2030, CMD3210, DQ2030, CMD3210, CTL3215, CTL3215, CLK2030, CLK2030, DQ2030, CMD3210, DQ2030, CMD3210, NC, CTL3215, NC, CLK2030, DQ2030, CMD3210, DQ2030, CMD3210, CTL3215, CTL3215, CLK2030, CLK2030, DQ2030, CMD2710, DQ2030, CMD3210, NC, CTL3215, NC, CLK2030, NC, NC, DQ2030, CMD2710, CTL3215, CTL3215, CLK2030, CLK2030, DQ2030, CMD3210, DQ2030, CMD2710, CTL3215, NC, CLK2030, NC, DQ2030, CMD3210, DQ2030, CMD2710, CTL3215, CTL3215, CLK2030, CLK2030, DQ2030, CMD3210, DQ2030, CMD2710, CTL3215, NC, CLK2030, NC, DQ2030, CMD2710, DQ2030, CMD2710, CTL3215, NC, CLK2030, NC, NC, NC, NC, NC, NC, CTL3215, NC, CLK2030, DQ2030, CMD3210, NC, NC, CTL3215, NC, CLK2030, NC, DQ2030, CMD3210, NC, NC, NC, CTL3215, NC, CLK2030, DQ2030, CMD3210, NC, NC, CTL3215, NC, CLK2030, CLK2030, DQ2030, CMD2710 }; static const u8 single_channel_slew_group_lookup[] = { DQ2330, CMD3210, CTL3215, CTL3215, CLK2030, CLK2030, DQ2330, CMD3210, DQ2330, CMD3210, CTL3215, CTL3215, CLK2030, CLK2030, DQ2330, CMD3210, DQ2330, CMD3210, NC, CTL3215, NC, CLK2030, DQ2330, CMD3210, DQ2330, CMD3210, CTL3215, CTL3215, CLK2030, CLK2030, DQ2330, CMD3210, DQ2330, CMD3210, NC, CTL3215, NC, CLK2030, NC, NC, DQ2330, CMD3210, CTL3215, CTL3215, CLK2030, CLK2030, DQ2330, CMD3210, DQ2330, CMD3210, CTL3215, NC, CLK2030, NC, DQ2330, CMD3210, DQ2330, CMD3210, CTL3215, CTL3215, CLK2030, CLK2030, DQ2330, CMD3210, DQ2330, CMD3210, CTL3215, NC, CLK2030, NC, DQ2330, CMD3210, DQ2330, CMD3210, CTL3215, NC, CLK2030, NC, NC, NC, DQ2330, CMD3210, NC, CTL3215, NC, CLK2030, DQ2330, CMD3210, DQ2330, CMD3210, CTL3215, CTL3215, CLK2030, CLK2030, DQ2330, CMD3210, DQ2330, CMD3210, NC, CTL3215, NC, CLK2030, DQ2330, CMD3210, DQ2330, CMD3210, CTL3215, CTL3215, CLK2030, CLK2030, DQ2330, CMD3210, DQ2330, CMD3210, NC, CTL3215, NC, CLK2030, NC, NC, DQ2330, CMD3210, CTL3215, CTL3215, CLK2030, CLK2030, DQ2330, CMD3210, DQ2330, CMD3210, CTL3215, NC, CLK2030, NC, DQ2330, CMD3210, DQ2330, CMD3210, CTL3215, CTL3215, CLK2030, CLK2030, DQ2330, CMD3210, DQ2330, CMD3210, CTL3215, NC, CLK2030, NC, DQ2330, CMD3210, DQ2330, CMD3210, CTL3215, NC, CLK2030, NC, NC, NC, DQ2330, NC, NC, CTL3215, NC, CLK2030, DQ2030, CMD3210, DQ2330, NC, CTL3215, NC, CLK2030, NC, DQ2030, CMD3210, DQ2330, NC, NC, CTL3215, NC, CLK2030, DQ2030, CMD3210, DQ2330, NC, CTL3215, NC, CLK2030, CLK2030, DQ2030, CMD3210 }; static const u32 *slew_group_lookup(int dual_channel, int index) { const u8 *slew_group; /* Dual Channel needs different tables. */ if (dual_channel) slew_group = dual_channel_slew_group_lookup; else slew_group = single_channel_slew_group_lookup; switch (slew_group[index]) { case DQ2030: return dq2030; case DQ2330: return dq2330; case CMD2710: return cmd2710; case CMD3210: return cmd3210; case CLK2030: return clk2030; case CTL3215: return ctl3215; case CTL3220: return ctl3220; case NC: return nc; } return nc; } #if CONFIG(NORTHBRIDGE_INTEL_SUBTYPE_I945GM) /* Strength multiplier tables */ static const u8 dual_channel_strength_multiplier[] = { 0x44, 0x11, 0x11, 0x11, 0x44, 0x44, 0x44, 0x11, 0x44, 0x11, 0x11, 0x11, 0x44, 0x44, 0x44, 0x11, 0x44, 0x11, 0x00, 0x11, 0x00, 0x44, 0x44, 0x11, 0x44, 0x11, 0x11, 0x11, 0x44, 0x44, 0x44, 0x22, 0x44, 0x11, 0x00, 0x11, 0x00, 0x44, 0x00, 0x00, 0x44, 0x11, 0x11, 0x11, 0x44, 0x44, 0x44, 0x11, 0x44, 0x11, 0x11, 0x00, 0x44, 0x00, 0x44, 0x11, 0x44, 0x11, 0x11, 0x11, 0x44, 0x44, 0x44, 0x11, 0x44, 0x11, 0x11, 0x00, 0x44, 0x00, 0x44, 0x22, 0x44, 0x11, 0x11, 0x00, 0x44, 0x00, 0x00, 0x00, 0x44, 0x11, 0x00, 0x11, 0x00, 0x44, 0x44, 0x11, 0x44, 0x11, 0x11, 0x11, 0x44, 0x44, 0x44, 0x11, 0x44, 0x11, 0x00, 0x11, 0x00, 0x44, 0x44, 0x11, 0x44, 0x11, 0x11, 0x11, 0x44, 0x44, 0x44, 0x22, 0x44, 0x11, 0x00, 0x11, 0x00, 0x44, 0x00, 0x00, 0x44, 0x22, 0x11, 0x11, 0x44, 0x44, 0x44, 0x11, 0x44, 0x22, 0x11, 0x00, 0x44, 0x00, 0x44, 0x11, 0x44, 0x22, 0x11, 0x11, 0x44, 0x44, 0x44, 0x11, 0x44, 0x22, 0x11, 0x00, 0x44, 0x00, 0x44, 0x22, 0x44, 0x22, 0x11, 0x00, 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x11, 0x00, 0x44, 0x44, 0x11, 0x00, 0x00, 0x11, 0x00, 0x44, 0x00, 0x44, 0x11, 0x00, 0x00, 0x00, 0x11, 0x00, 0x44, 0x44, 0x11, 0x00, 0x00, 0x11, 0x00, 0x44, 0x44, 0x44, 0x22 }; static const u8 single_channel_strength_multiplier[] = { 0x33, 0x11, 0x11, 0x11, 0x44, 0x44, 0x33, 0x11, 0x33, 0x11, 0x11, 0x11, 0x44, 0x44, 0x33, 0x11, 0x33, 0x11, 0x00, 0x11, 0x00, 0x44, 0x33, 0x11, 0x33, 0x11, 0x11, 0x11, 0x44, 0x44, 0x33, 0x11, 0x33, 0x11, 0x00, 0x11, 0x00, 0x44, 0x00, 0x00, 0x33, 0x11, 0x11, 0x11, 0x44, 0x44, 0x33, 0x11, 0x33, 0x11, 0x11, 0x00, 0x44, 0x00, 0x33, 0x11, 0x33, 0x11, 0x11, 0x11, 0x44, 0x44, 0x33, 0x11, 0x33, 0x11, 0x11, 0x00, 0x44, 0x00, 0x33, 0x11, 0x33, 0x11, 0x11, 0x00, 0x44, 0x00, 0x00, 0x00, 0x33, 0x11, 0x00, 0x11, 0x00, 0x44, 0x33, 0x11, 0x33, 0x11, 0x11, 0x11, 0x44, 0x44, 0x33, 0x11, 0x33, 0x11, 0x00, 0x11, 0x00, 0x44, 0x33, 0x11, 0x33, 0x11, 0x11, 0x11, 0x44, 0x44, 0x33, 0x11, 0x33, 0x11, 0x00, 0x11, 0x00, 0x44, 0x00, 0x00, 0x33, 0x11, 0x11, 0x11, 0x44, 0x44, 0x33, 0x11, 0x33, 0x11, 0x11, 0x00, 0x44, 0x00, 0x33, 0x11, 0x33, 0x11, 0x11, 0x11, 0x44, 0x44, 0x33, 0x11, 0x33, 0x11, 0x11, 0x00, 0x44, 0x00, 0x33, 0x11, 0x33, 0x11, 0x11, 0x00, 0x44, 0x00, 0x00, 0x00, 0x33, 0x00, 0x00, 0x11, 0x00, 0x44, 0x33, 0x11, 0x33, 0x00, 0x11, 0x00, 0x44, 0x00, 0x33, 0x11, 0x33, 0x00, 0x00, 0x11, 0x00, 0x44, 0x33, 0x11, 0x33, 0x00, 0x11, 0x00, 0x44, 0x44, 0x33, 0x11 }; #elif CONFIG(NORTHBRIDGE_INTEL_SUBTYPE_I945GC) static const u8 dual_channel_strength_multiplier[] = { 0x44, 0x22, 0x00, 0x00, 0x44, 0x44, 0x44, 0x22, 0x44, 0x22, 0x00, 0x00, 0x44, 0x44, 0x44, 0x22, 0x44, 0x22, 0x00, 0x00, 0x44, 0x44, 0x44, 0x22, 0x44, 0x22, 0x00, 0x00, 0x44, 0x44, 0x44, 0x33, 0x44, 0x22, 0x00, 0x00, 0x44, 0x44, 0x44, 0x00, 0x44, 0x22, 0x00, 0x00, 0x44, 0x44, 0x44, 0x22, 0x44, 0x22, 0x00, 0x00, 0x44, 0x44, 0x44, 0x22, 0x44, 0x22, 0x00, 0x00, 0x44, 0x44, 0x44, 0x22, 0x44, 0x22, 0x00, 0x00, 0x44, 0x44, 0x44, 0x33, 0x44, 0x22, 0x00, 0x00, 0x44, 0x44, 0x44, 0x00, 0x44, 0x22, 0x00, 0x00, 0x44, 0x44, 0x44, 0x22, 0x44, 0x22, 0x00, 0x00, 0x44, 0x44, 0x44, 0x22, 0x44, 0x22, 0x00, 0x00, 0x44, 0x44, 0x44, 0x22, 0x44, 0x22, 0x00, 0x00, 0x44, 0x44, 0x44, 0x33, 0x44, 0x22, 0x00, 0x00, 0x44, 0x44, 0x44, 0x00, 0x44, 0x33, 0x00, 0x00, 0x44, 0x44, 0x44, 0x22, 0x44, 0x33, 0x00, 0x00, 0x44, 0x44, 0x44, 0x22, 0x44, 0x33, 0x00, 0x00, 0x44, 0x44, 0x44, 0x22, 0x44, 0x33, 0x00, 0x00, 0x44, 0x44, 0x44, 0x33, 0x44, 0x33, 0x00, 0x00, 0x44, 0x44, 0x44, 0x00, 0x44, 0x00, 0x00, 0x00, 0x44, 0x44, 0x44, 0x22, 0x44, 0x00, 0x00, 0x00, 0x44, 0x44, 0x44, 0x22, 0x44, 0x00, 0x00, 0x00, 0x44, 0x44, 0x44, 0x22, 0x44, 0x00, 0x00, 0x00, 0x44, 0x44, 0x44, 0x33 }; static const u8 single_channel_strength_multiplier[] = { 0x44, 0x33, 0x00, 0x00, 0x44, 0x44, 0x44, 0x00, 0x44, 0x44, 0x00, 0x00, 0x44, 0x44, 0x44, 0x00, 0x44, 0x33, 0x00, 0x00, 0x44, 0x44, 0x44, 0x00, 0x44, 0x55, 0x00, 0x00, 0x44, 0x44, 0x44, 0x00, 0x44, 0x22, 0x00, 0x00, 0x44, 0x44, 0x44, 0x00, 0x44, 0x44, 0x00, 0x00, 0x44, 0x44, 0x44, 0x00, 0x44, 0x55, 0x00, 0x00, 0x44, 0x44, 0x44, 0x00, 0x44, 0x44, 0x00, 0x00, 0x44, 0x44, 0x44, 0x00, 0x44, 0x88, 0x00, 0x00, 0x44, 0x44, 0x44, 0x00, 0x44, 0x22, 0x00, 0x00, 0x44, 0x44, 0x44, 0x00, 0x44, 0x33, 0x00, 0x00, 0x44, 0x44, 0x44, 0x00, 0x44, 0x44, 0x00, 0x00, 0x44, 0x44, 0x44, 0x00, 0x44, 0x33, 0x00, 0x00, 0x44, 0x44, 0x44, 0x00, 0x44, 0x55, 0x00, 0x00, 0x44, 0x44, 0x44, 0x00, 0x44, 0x22, 0x00, 0x00, 0x44, 0x44, 0x44, 0x00, 0x44, 0x55, 0x00, 0x00, 0x44, 0x44, 0x44, 0x00, 0x44, 0x88, 0x00, 0x00, 0x44, 0x44, 0x44, 0x00, 0x44, 0x55, 0x00, 0x00, 0x44, 0x44, 0x44, 0x00, 0x44, 0x88, 0x00, 0x00, 0x44, 0x44, 0x44, 0x00, 0x44, 0x33, 0x00, 0x00, 0x44, 0x44, 0x44, 0x00, 0x44, 0x22, 0x00, 0x00, 0x44, 0x44, 0x44, 0x00, 0x44, 0x22, 0x00, 0x00, 0x44, 0x44, 0x44, 0x00, 0x44, 0x22, 0x00, 0x00, 0x44, 0x44, 0x44, 0x00, 0x44, 0x33, 0x00, 0x00, 0x44, 0x44, 0x44, 0x00 }; #endif static void sdram_rcomp_buffer_strength_and_slew(struct sys_info *sysinfo) { const u8 *strength_multiplier; int idx, dual_channel; /* Set Strength Multipliers */ /* Dual Channel needs different tables. */ if (sdram_capabilities_dual_channel()) { printk(BIOS_DEBUG, "Programming Dual Channel RCOMP\n"); strength_multiplier = dual_channel_strength_multiplier; dual_channel = 1; idx = 5 * sysinfo->dimm[0] + sysinfo->dimm[2]; } else { printk(BIOS_DEBUG, "Programming Single Channel RCOMP\n"); strength_multiplier = single_channel_strength_multiplier; dual_channel = 0; idx = 5 * sysinfo->dimm[0] + sysinfo->dimm[1]; } printk(BIOS_DEBUG, "Table Index: %d\n", idx); mchbar_write8(G1SC, strength_multiplier[idx * 8 + 0]); mchbar_write8(G2SC, strength_multiplier[idx * 8 + 1]); mchbar_write8(G3SC, strength_multiplier[idx * 8 + 2]); mchbar_write8(G4SC, strength_multiplier[idx * 8 + 3]); mchbar_write8(G5SC, strength_multiplier[idx * 8 + 4]); mchbar_write8(G6SC, strength_multiplier[idx * 8 + 5]); mchbar_write8(G7SC, strength_multiplier[idx * 8 + 6]); mchbar_write8(G8SC, strength_multiplier[idx * 8 + 7]); /* Channel 0 */ sdram_write_slew_rates(G1SRPUT, slew_group_lookup(dual_channel, idx * 8 + 0)); sdram_write_slew_rates(G2SRPUT, slew_group_lookup(dual_channel, idx * 8 + 1)); if ((slew_group_lookup(dual_channel, idx * 8 + 2) != nc) && (sysinfo->package == SYSINFO_PACKAGE_STACKED)) sdram_write_slew_rates(G3SRPUT, ctl3220); else sdram_write_slew_rates(G3SRPUT, slew_group_lookup(dual_channel, idx * 8 + 2)); sdram_write_slew_rates(G4SRPUT, slew_group_lookup(dual_channel, idx * 8 + 3)); sdram_write_slew_rates(G5SRPUT, slew_group_lookup(dual_channel, idx * 8 + 4)); sdram_write_slew_rates(G6SRPUT, slew_group_lookup(dual_channel, idx * 8 + 5)); /* Channel 1 */ if (sysinfo->dual_channel) { sdram_write_slew_rates(G7SRPUT, slew_group_lookup(dual_channel, idx * 8 + 6)); sdram_write_slew_rates(G8SRPUT, slew_group_lookup(dual_channel, idx * 8 + 7)); } else { sdram_write_slew_rates(G7SRPUT, nc); sdram_write_slew_rates(G8SRPUT, nc); } } static void sdram_enable_rcomp(void) { u32 reg32; /* Enable Global Periodic RCOMP */ udelay(300); reg32 = mchbar_read32(GBRCOMPCTL); reg32 &= ~(1 << 23); mchbar_write32(GBRCOMPCTL, reg32); } static void sdram_program_dll_timings(struct sys_info *sysinfo) { u32 channeldll = 0; int i; printk(BIOS_DEBUG, "Programming DLL Timings...\n"); mchbar_clrbits16(DQSMT, 3 << 12 | 1 << 10 | 0xf << 0); mchbar_setbits16(DQSMT, 1 << 13 | 0xc << 0); /* We drive both channels with the same speed */ if (CONFIG(NORTHBRIDGE_INTEL_SUBTYPE_I945GM)) { switch (sysinfo->memory_frequency) { case 400: channeldll = 0x26262626; break; case 533: channeldll = 0x22222222; break; case 667: channeldll = 0x11111111; break; } } else if (CONFIG(NORTHBRIDGE_INTEL_SUBTYPE_I945GC)) { switch (sysinfo->memory_frequency) { case 400: channeldll = 0x33333333; break; case 533: channeldll = 0x24242424; break; case 667: channeldll = 0x25252525; break; } } for (i = 0; i < 4; i++) { mchbar_write32(C0R0B00DQST + (i * 0x10) + 0, channeldll); mchbar_write32(C0R0B00DQST + (i * 0x10) + 4, channeldll); mchbar_write32(C1R0B00DQST + (i * 0x10) + 0, channeldll); mchbar_write32(C1R0B00DQST + (i * 0x10) + 4, channeldll); if (CONFIG(NORTHBRIDGE_INTEL_SUBTYPE_I945GC)) { mchbar_write8(C0R0B00DQST + (i * 0x10) + 8, channeldll & 0xff); mchbar_write8(C1R0B00DQST + (i * 0x10) + 8, channeldll & 0xff); } } } static void sdram_force_rcomp(void) { u32 reg32; u8 reg8; reg32 = mchbar_read32(ODTC); reg32 |= (1 << 28); mchbar_write32(ODTC, reg32); reg32 = mchbar_read32(SMSRCTL); reg32 |= (1 << 0); mchbar_write32(SMSRCTL, reg32); /* Start initial RCOMP */ reg32 = mchbar_read32(GBRCOMPCTL); reg32 |= (1 << 8); mchbar_write32(GBRCOMPCTL, reg32); reg8 = i945_silicon_revision(); if ((reg8 == 0 && (mchbar_read32(DCC) & (3 << 0)) == 0) || (reg8 == 1)) { reg32 = mchbar_read32(GBRCOMPCTL); reg32 |= (3 << 5); mchbar_write32(GBRCOMPCTL, reg32); } } static void sdram_initialize_system_memory_io(struct sys_info *sysinfo) { u8 reg8; u32 reg32; printk(BIOS_DEBUG, "Initializing System Memory IO...\n"); /* Enable Data Half Clock Pushout */ reg8 = mchbar_read8(C0HCTC); reg8 &= ~0x1f; reg8 |= (1 << 0); mchbar_write8(C0HCTC, reg8); reg8 = mchbar_read8(C1HCTC); reg8 &= ~0x1f; reg8 |= (1 << 0); mchbar_write8(C1HCTC, reg8); mchbar_clrbits16(WDLLBYPMODE, 1 << 9 | 1 << 6 | 1 << 4 | 1 << 3 | 1 << 1); mchbar_setbits16(WDLLBYPMODE, 1 << 8 | 1 << 7 | 1 << 5 | 1 << 2 | 1 << 0); mchbar_write8(C0WDLLCMC, 0); mchbar_write8(C1WDLLCMC, 0); /* Program RCOMP Settings */ sdram_program_dram_width(sysinfo); sdram_rcomp_buffer_strength_and_slew(sysinfo); /* Indicate that RCOMP programming is done */ reg32 = mchbar_read32(GBRCOMPCTL); reg32 &= ~((1 << 29) | (1 << 26) | (3 << 21) | (3 << 2)); reg32 |= (3 << 27) | (3 << 0); mchbar_write32(GBRCOMPCTL, reg32); mchbar_setbits32(GBRCOMPCTL, 1 << 10); /* Program DLL Timings */ sdram_program_dll_timings(sysinfo); /* Force RCOMP cycle */ sdram_force_rcomp(); } static void sdram_enable_system_memory_io(struct sys_info *sysinfo) { u32 reg32; printk(BIOS_DEBUG, "Enabling System Memory IO...\n"); reg32 = mchbar_read32(RCVENMT); reg32 &= ~(0x3f << 6); mchbar_write32(RCVENMT, reg32); /* [11:6] = 0 */ reg32 |= (1 << 11) | (1 << 9); mchbar_write32(RCVENMT, reg32); reg32 = mchbar_read32(DRTST); reg32 |= (1 << 3) | (1 << 2); mchbar_write32(DRTST, reg32); reg32 = mchbar_read32(DRTST); reg32 |= (1 << 6) | (1 << 4); mchbar_write32(DRTST, reg32); asm volatile ("nop; nop;" ::: "memory"); reg32 = mchbar_read32(DRTST); /* Is channel 0 populated? */ if (sysinfo->dimm[0] != SYSINFO_DIMM_NOT_POPULATED || sysinfo->dimm[1] != SYSINFO_DIMM_NOT_POPULATED) reg32 |= (1 << 7) | (1 << 5); else reg32 |= (1 << 31); /* Is channel 1 populated? */ if (sysinfo->dimm[2] != SYSINFO_DIMM_NOT_POPULATED || sysinfo->dimm[3] != SYSINFO_DIMM_NOT_POPULATED) reg32 |= (1 << 9) | (1 << 8); else reg32 |= (1 << 30); mchbar_write32(DRTST, reg32); /* Activate DRAM Channel IO Buffers */ if (sysinfo->dimm[0] != SYSINFO_DIMM_NOT_POPULATED || sysinfo->dimm[1] != SYSINFO_DIMM_NOT_POPULATED) { reg32 = mchbar_read32(C0DRC1); reg32 |= (1 << 8); mchbar_write32(C0DRC1, reg32); } if (sysinfo->dimm[2] != SYSINFO_DIMM_NOT_POPULATED || sysinfo->dimm[3] != SYSINFO_DIMM_NOT_POPULATED) { reg32 = mchbar_read32(C1DRC1); reg32 |= (1 << 8); mchbar_write32(C1DRC1, reg32); } } static int sdram_program_row_boundaries(struct sys_info *sysinfo) { int i; int cum0, cum1, tolud, tom, pci_mmio_size; const struct device *dev; const struct northbridge_intel_i945_config *cfg = NULL; printk(BIOS_DEBUG, "Setting RAM size...\n"); cum0 = 0; for (i = 0; i < 2 * DIMM_SOCKETS; i++) { cum0 += sysinfo->banksize[i]; mchbar_write8(C0DRB0 + i, cum0); } /* Assume we continue in Channel 1 where we stopped in Channel 0 */ cum1 = cum0; /* Exception: Interleaved starts from the beginning */ if (sysinfo->interleaved) cum1 = 0; for (i = 0; i < 2 * DIMM_SOCKETS; i++) { cum1 += sysinfo->banksize[i + 4]; mchbar_write8(C1DRB0 + i, cum1); } /* Set TOLUD Top Of Low Usable DRAM */ if (sysinfo->interleaved) tolud = (cum0 + cum1) << 1; else tolud = (cum1 ? cum1 : cum0) << 1; /* The TOM register has a different format */ tom = tolud >> 3; /* Limit the value of TOLUD to leave some space for PCI memory. */ dev = pcidev_on_root(0, 0); if (dev) cfg = dev->chip_info; /* Don't use pci mmio sizes smaller than 768M */ if (!cfg || cfg->pci_mmio_size <= DEFAULT_PCI_MMIO_SIZE) pci_mmio_size = DEFAULT_PCI_MMIO_SIZE; else pci_mmio_size = cfg->pci_mmio_size; tolud = MIN(((4096 - pci_mmio_size) / 128) << 3, tolud); pci_write_config8(HOST_BRIDGE, TOLUD, tolud); printk(BIOS_DEBUG, "C0DRB = 0x%08x\n", mchbar_read32(C0DRB0)); printk(BIOS_DEBUG, "C1DRB = 0x%08x\n", mchbar_read32(C1DRB0)); printk(BIOS_DEBUG, "TOLUD = 0x%04x\n", pci_read_config8(HOST_BRIDGE, TOLUD)); pci_write_config16(HOST_BRIDGE, TOM, tom); return 0; } static int sdram_set_row_attributes(struct sys_info *sysinfo) { int i; u16 dra0 = 0, dra1 = 0, dra = 0; printk(BIOS_DEBUG, "Setting row attributes...\n"); for (i = 0; i < 2 * DIMM_SOCKETS; i++) { u8 columnsrows; if (sysinfo->dimm[i] == SYSINFO_DIMM_NOT_POPULATED) continue; columnsrows = (sysinfo->rows[i] & 0x0f) | (sysinfo->cols[i] & 0xf) << 4; switch (columnsrows) { case 0x9d: dra = 2; break; case 0xad: dra = 3; break; case 0xbd: dra = 4; break; case 0xae: dra = 3; break; case 0xbe: dra = 4; break; default: die("Unsupported Rows/Columns. (DRA)"); } /* Double Sided DIMMs? */ if (sysinfo->banksize[(2 * i) + 1] != 0) dra = (dra << 4) | dra; if (i < DIMM_SOCKETS) dra0 |= (dra << (i * 8)); else dra1 |= (dra << ((i - DIMM_SOCKETS) * 8)); } mchbar_write16(C0DRA0, dra0); mchbar_write16(C1DRA0, dra1); printk(BIOS_DEBUG, "C0DRA = 0x%04x\n", dra0); printk(BIOS_DEBUG, "C1DRA = 0x%04x\n", dra1); return 0; } static void sdram_set_bank_architecture(struct sys_info *sysinfo) { u32 off32; int i; mchbar_clrbits16(C1BNKARC, 0xff); mchbar_clrbits16(C0BNKARC, 0xff); off32 = C0BNKARC; for (i = 0; i < 2 * DIMM_SOCKETS; i++) { /* Switch to second channel */ if (i == DIMM_SOCKETS) off32 = C1BNKARC; if (sysinfo->dimm[i] == SYSINFO_DIMM_NOT_POPULATED) continue; if (sysinfo->banks[i] != 8) continue; printk(BIOS_SPEW, "DIMM%d has 8 banks.\n", i); if (i & 1) mchbar_setbits16(off32, 5 << 4); else mchbar_setbits16(off32, 5 << 0); } } static void sdram_program_refresh_rate(struct sys_info *sysinfo) { u32 reg32; if (sysinfo->refresh == REFRESH_7_8US) reg32 = (2 << 8); /* Refresh enabled at 7.8us */ else reg32 = (1 << 8); /* Refresh enabled at 15.6us */ mchbar_clrbits32(C0DRC0, 7 << 8); mchbar_setbits32(C0DRC0, reg32); mchbar_clrbits32(C1DRC0, 7 << 8); mchbar_setbits32(C1DRC0, reg32); } static void sdram_program_cke_tristate(struct sys_info *sysinfo) { u32 reg32; int i; reg32 = mchbar_read32(C0DRC1); for (i = 0; i < 4; i++) { if (sysinfo->banksize[i] == 0) reg32 |= (1 << (16 + i)); } reg32 |= (1 << 12); reg32 |= (1 << 11); mchbar_write32(C0DRC1, reg32); /* Do we have to do this if we're in Single Channel Mode? */ reg32 = mchbar_read32(C1DRC1); for (i = 4; i < 8; i++) { if (sysinfo->banksize[i] == 0) reg32 |= (1 << (12 + i)); } reg32 |= (1 << 12); reg32 |= (1 << 11); mchbar_write32(C1DRC1, reg32); } static void sdram_program_odt_tristate(struct sys_info *sysinfo) { u32 reg32; int i; reg32 = mchbar_read32(C0DRC2); for (i = 0; i < 4; i++) { if (sysinfo->banksize[i] == 0) reg32 |= (1 << (24 + i)); } mchbar_write32(C0DRC2, reg32); reg32 = mchbar_read32(C1DRC2); for (i = 4; i < 8; i++) { if (sysinfo->banksize[i] == 0) reg32 |= (1 << (20 + i)); } mchbar_write32(C1DRC2, reg32); } static void sdram_set_timing_and_control(struct sys_info *sysinfo) { u32 reg32, tRD_min; u32 tWTR; u32 temp_drt; int i, page_size; static const u8 cas_table[] = { 2, 1, 0, 3 }; reg32 = mchbar_read32(C0DRC0); reg32 |= (1 << 2); /* Burst Length 8 */ reg32 &= ~((1 << 13) | (1 << 12)); mchbar_write32(C0DRC0, reg32); reg32 = mchbar_read32(C1DRC0); reg32 |= (1 << 2); /* Burst Length 8 */ reg32 &= ~((1 << 13) | (1 << 12)); mchbar_write32(C1DRC0, reg32); if (!sysinfo->dual_channel && sysinfo->dimm[1] != SYSINFO_DIMM_NOT_POPULATED) { reg32 = mchbar_read32(C0DRC0); reg32 |= (1 << 15); mchbar_write32(C0DRC0, reg32); } sdram_program_refresh_rate(sysinfo); sdram_program_cke_tristate(sysinfo); sdram_program_odt_tristate(sysinfo); /* Calculate DRT0 */ temp_drt = 0; /* B2B Write Precharge (same bank) = CL-1 + BL/2 + tWR */ reg32 = (sysinfo->cas - 1) + (BURSTLENGTH / 2) + sysinfo->twr; temp_drt |= (reg32 << 28); /* Write Auto Precharge (same bank) = CL-1 + BL/2 + tWR + tRP */ reg32 += sysinfo->trp; temp_drt |= (reg32 << 4); if (sysinfo->memory_frequency == 667) tWTR = 3; /* 667MHz */ else tWTR = 2; /* 400 and 533 */ /* B2B Write to Read Command Spacing */ reg32 = (sysinfo->cas - 1) + (BURSTLENGTH / 2) + tWTR; temp_drt |= (reg32 << 24); /* CxDRT0 [23:22], [21:20], [19:18] [16] have fixed values */ temp_drt |= ((1 << 22) | (3 << 20) | (1 << 18) | (0 << 16)); /* * tRD is the delay the memory controller is waiting on the FSB, * in mclk domain. * This parameter is important for stability and performance. * Those values might not be optimal but seem stable. */ tRD_min = sysinfo->cas; switch (sysinfo->fsb_frequency) { case 533: break; case 667: tRD_min += 1; break; case 800: tRD_min += 2; break; case 1066: tRD_min += 3; break; } temp_drt |= (tRD_min << 11); /* Read Auto Precharge to Activate */ temp_drt |= (8 << 0); mchbar_write32(C0DRT0, temp_drt); mchbar_write32(C1DRT0, temp_drt); /* Calculate DRT1 */ temp_drt = mchbar_read32(C0DRT1) & 0x00020088; /* DRAM RASB Precharge */ temp_drt |= (sysinfo->trp - 2) << 0; /* DRAM RASB to CASB Delay */ temp_drt |= (sysinfo->trcd - 2) << 4; /* CASB Latency */ temp_drt |= (cas_table[sysinfo->cas - 3]) << 8; /* Refresh Cycle Time */ temp_drt |= (sysinfo->trfc) << 10; /* Pre-All to Activate Delay */ temp_drt |= (0 << 16); /* Precharge to Precharge Delay stays at 1 clock */ temp_drt |= (0 << 18); /* Activate to Precharge Delay */ temp_drt |= (sysinfo->tras << 19); /* Read to Precharge (tRTP) */ if (sysinfo->memory_frequency == 667) temp_drt |= (1 << 28); else temp_drt |= (0 << 28); /* Determine page size */ reg32 = 0; page_size = 1; /* Default: 1k pagesize */ for (i = 0; i < 2*DIMM_SOCKETS; i++) { if (sysinfo->dimm[i] == SYSINFO_DIMM_X16DS || sysinfo->dimm[i] == SYSINFO_DIMM_X16SS) page_size = 2; /* 2k pagesize */ } if (sysinfo->memory_frequency == 533 && page_size == 2) reg32 = 1; if (sysinfo->memory_frequency == 667) reg32 = page_size; temp_drt |= (reg32 << 30); mchbar_write32(C0DRT1, temp_drt); mchbar_write32(C1DRT1, temp_drt); /* Program DRT2 */ reg32 = mchbar_read32(C0DRT2); reg32 &= ~(1 << 8); mchbar_write32(C0DRT2, reg32); reg32 = mchbar_read32(C1DRT2); reg32 &= ~(1 << 8); mchbar_write32(C1DRT2, reg32); /* Calculate DRT3 */ temp_drt = mchbar_read32(C0DRT3) & ~0x07ffffff; /* Get old tRFC value */ reg32 = mchbar_read32(C0DRT1) >> 10; reg32 &= 0x3f; /* 788nS - tRFC */ switch (sysinfo->memory_frequency) { case 400: /* 5nS */ reg32 = ((78800 / 500) - reg32) & 0x1ff; reg32 |= (0x8c << 16) | (0x0c << 10); /* 1 us */ break; case 533: /* 3.75nS */ reg32 = ((78800 / 375) - reg32) & 0x1ff; reg32 |= (0xba << 16) | (0x10 << 10); /* 1 us */ break; case 667: /* 3nS */ reg32 = ((78800 / 300) - reg32) & 0x1ff; reg32 |= (0xe9 << 16) | (0x14 << 10); /* 1 us */ break; } temp_drt |= reg32; mchbar_write32(C0DRT3, temp_drt); mchbar_write32(C1DRT3, temp_drt); } static void sdram_set_channel_mode(struct sys_info *sysinfo) { u32 reg32; printk(BIOS_DEBUG, "Setting mode of operation for memory channels..."); if (sdram_capabilities_interleave() && ((sysinfo->banksize[0] + sysinfo->banksize[1] + sysinfo->banksize[2] + sysinfo->banksize[3]) == (sysinfo->banksize[4] + sysinfo->banksize[5] + sysinfo->banksize[6] + sysinfo->banksize[7]))) { /* Both channels equipped with DIMMs of the same size */ sysinfo->interleaved = 1; } else { sysinfo->interleaved = 0; } reg32 = mchbar_read32(DCC); reg32 &= ~(7 << 0); if (sysinfo->interleaved) { /* Dual Channel Interleaved */ printk(BIOS_DEBUG, "Dual Channel Interleaved.\n"); reg32 |= (1 << 1); } else if (sysinfo->dimm[0] == SYSINFO_DIMM_NOT_POPULATED && sysinfo->dimm[1] == SYSINFO_DIMM_NOT_POPULATED) { /* Channel 1 only */ printk(BIOS_DEBUG, "Single Channel 1 only.\n"); reg32 |= (1 << 2); } else if (sdram_capabilities_dual_channel() && (sysinfo->dimm[2] != SYSINFO_DIMM_NOT_POPULATED || sysinfo->dimm[3] != SYSINFO_DIMM_NOT_POPULATED)) { /* Dual Channel Asymmetric */ printk(BIOS_DEBUG, "Dual Channel Asymmetric.\n"); reg32 |= (1 << 0); } else { /* All bits 0 means Single Channel 0 operation */ printk(BIOS_DEBUG, "Single Channel 0 only.\n"); } /* Now disable channel XORing */ reg32 |= (1 << 10); mchbar_write32(DCC, reg32); PRINTK_DEBUG("DCC = 0x%08x\n", mchbar_read32(DCC)); } static void sdram_program_pll_settings(struct sys_info *sysinfo) { mchbar_write32(PLLMON, 0x80800000); sysinfo->fsb_frequency = fsbclk(); if (sysinfo->fsb_frequency == 0xffff) die("Unsupported FSB speed"); /* Program CPCTL according to FSB speed */ /* Only write the lower byte */ switch (sysinfo->fsb_frequency) { case 400: mchbar_write8(CPCTL, 0x90); break; case 533: mchbar_write8(CPCTL, 0x95); break; case 667: mchbar_write8(CPCTL, 0x8d); break; } mchbar_clrbits16(CPCTL, 1 << 11); mchbar_read16(CPCTL); /* Read back register to activate settings */ } static void sdram_program_graphics_frequency(struct sys_info *sysinfo) { u8 reg8; u8 freq, second_vco, voltage; #define CRCLK_166MHz 0x00 #define CRCLK_200MHz 0x01 #define CRCLK_250MHz 0x03 #define CRCLK_400MHz 0x05 #define CDCLK_200MHz 0x00 #define CDCLK_320MHz 0x40 #define VOLTAGE_1_05 0x00 #define VOLTAGE_1_50 0x01 printk(BIOS_DEBUG, "Setting Graphics Frequency...\n"); printk(BIOS_DEBUG, "FSB: %d MHz ", sysinfo->fsb_frequency); voltage = VOLTAGE_1_05; if (mchbar_read32(DFT_STRAP1) & (1 << 20)) voltage = VOLTAGE_1_50; printk(BIOS_DEBUG, "Voltage: %s ", (voltage == VOLTAGE_1_05) ? "1.05V" : "1.5V"); /* Gate graphics hardware for frequency change */ reg8 = (1 << 3) | (1 << 1); /* disable crclk, gate cdclk */ pci_write_config8(IGD_DEV, GCFC + 1, reg8); /* Get graphics frequency capabilities */ reg8 = sdram_capabilities_core_frequencies(); freq = CRCLK_250MHz; switch (reg8) { case GFX_FREQUENCY_CAP_ALL: if (voltage == VOLTAGE_1_05) freq = CRCLK_250MHz; else freq = CRCLK_400MHz; /* 1.5V requires 400MHz */ break; case GFX_FREQUENCY_CAP_250MHZ: freq = CRCLK_250MHz; break; case GFX_FREQUENCY_CAP_200MHZ: freq = CRCLK_200MHz; break; case GFX_FREQUENCY_CAP_166MHZ: freq = CRCLK_166MHz; break; } if (freq != CRCLK_400MHz) { /* What chipset are we? Force 166MHz for GMS */ reg8 = (pci_read_config8(HOST_BRIDGE, 0xe7) & 0x70) >> 4; if (reg8 == 2) freq = CRCLK_166MHz; } printk(BIOS_DEBUG, "Render: "); switch (freq) { case CRCLK_166MHz: printk(BIOS_DEBUG, "166MHz"); break; case CRCLK_200MHz: printk(BIOS_DEBUG, "200MHz"); break; case CRCLK_250MHz: printk(BIOS_DEBUG, "250MHz"); break; case CRCLK_400MHz: printk(BIOS_DEBUG, "400MHz"); break; } if (i945_silicon_revision() == 0) sysinfo->mvco4x = 1; else sysinfo->mvco4x = 0; second_vco = 0; if (voltage == VOLTAGE_1_50) { second_vco = 1; } else if ((i945_silicon_revision() > 0) && (freq == CRCLK_250MHz)) { u16 mem = sysinfo->memory_frequency; u16 fsb = sysinfo->fsb_frequency; if ((fsb == 667 && mem == 533) || (fsb == 533 && mem == 533) || (fsb == 533 && mem == 400)) { second_vco = 1; } if (fsb == 667 && mem == 533) sysinfo->mvco4x = 1; } if (second_vco) sysinfo->clkcfg_bit7 = 1; else sysinfo->clkcfg_bit7 = 0; /* Graphics Core Render Clock */ pci_update_config16(IGD_DEV, GCFC, ~((7 << 0) | (1 << 13)), freq); /* Graphics Core Display Clock */ reg8 = pci_read_config8(IGD_DEV, GCFC); reg8 &= ~((1 << 7) | (7 << 4)); if (voltage == VOLTAGE_1_05) { reg8 |= CDCLK_200MHz; printk(BIOS_DEBUG, " Display: 200MHz\n"); } else { reg8 |= CDCLK_320MHz; printk(BIOS_DEBUG, " Display: 320MHz\n"); } pci_write_config8(IGD_DEV, GCFC, reg8); reg8 = pci_read_config8(IGD_DEV, GCFC + 1); reg8 |= (1 << 3) | (1 << 1); pci_write_config8(IGD_DEV, GCFC + 1, reg8); reg8 |= 0x0f; pci_write_config8(IGD_DEV, GCFC + 1, reg8); /* Ungate core render and display clocks */ reg8 &= 0xf0; pci_write_config8(IGD_DEV, GCFC + 1, reg8); } static void sdram_program_memory_frequency(struct sys_info *sysinfo) { u32 clkcfg; u8 offset = CONFIG(NORTHBRIDGE_INTEL_SUBTYPE_I945GM) ? 1 : 0; printk(BIOS_DEBUG, "Setting Memory Frequency... "); clkcfg = mchbar_read32(CLKCFG); printk(BIOS_DEBUG, "CLKCFG = 0x%08x, ", clkcfg); clkcfg &= ~((1 << 12) | (1 << 7) | (7 << 4)); if (sysinfo->mvco4x) { printk(BIOS_DEBUG, "MVCO 4x, "); clkcfg &= ~(1 << 12); } if (sysinfo->clkcfg_bit7) { printk(BIOS_DEBUG, "second VCO, "); clkcfg |= (1 << 7); } switch (sysinfo->memory_frequency) { case 400: clkcfg |= ((1 + offset) << 4); break; case 533: clkcfg |= ((2 + offset) << 4); break; case 667: clkcfg |= ((3 + offset) << 4); break; default: die("Target Memory Frequency Error"); } if (mchbar_read32(CLKCFG) == clkcfg) { printk(BIOS_DEBUG, "ok (unchanged)\n"); return; } mchbar_write32(CLKCFG, clkcfg); /* Make sure the following code is in the cache before we execute it. */ goto cache_code; vco_update: pci_and_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_2, (u8)~(1 << 7)); clkcfg &= ~(1 << 10); mchbar_write32(CLKCFG, clkcfg); clkcfg |= (1 << 10); mchbar_write32(CLKCFG, clkcfg); asm volatile ( " movl $0x100, %%ecx\n" "delay_update:\n" " nop\n" " nop\n" " nop\n" " nop\n" " loop delay_update\n" : /* No outputs */ : /* No inputs */ : "%ecx", "memory" ); clkcfg &= ~(1 << 10); mchbar_write32(CLKCFG, clkcfg); goto out; cache_code: goto vco_update; out: printk(BIOS_DEBUG, "CLKCFG = 0x%08x, ", mchbar_read32(CLKCFG)); printk(BIOS_DEBUG, "ok\n"); } static void sdram_program_clock_crossing(void) { int idx = 0; /** * We add the indices according to our clocks from CLKCFG. */ #if CONFIG(NORTHBRIDGE_INTEL_SUBTYPE_I945GM) static const u32 data_clock_crossing[] = { 0x00100401, 0x00000000, /* DDR400 FSB400 */ 0xffffffff, 0xffffffff, /* nonexistent */ 0xffffffff, 0xffffffff, /* nonexistent */ 0x08040120, 0x00000000, /* DDR400 FSB533 */ 0x00100401, 0x00000000, /* DDR533 FSB533 */ 0x00010402, 0x00000000, /* DDR667 FSB533 - fake values */ 0x04020120, 0x00000010, /* DDR400 FSB667 */ 0x10040280, 0x00000040, /* DDR533 FSB667 */ 0x00100401, 0x00000000, /* DDR667 FSB667 */ 0xffffffff, 0xffffffff, /* nonexistent */ 0xffffffff, 0xffffffff, /* nonexistent */ 0xffffffff, 0xffffffff, /* nonexistent */ 0xffffffff, 0xffffffff, /* nonexistent */ 0xffffffff, 0xffffffff, /* nonexistent */ 0xffffffff, 0xffffffff, /* nonexistent */ }; static const u32 command_clock_crossing[] = { 0x04020208, 0x00000000, /* DDR400 FSB400 */ 0xffffffff, 0xffffffff, /* nonexistent */ 0xffffffff, 0xffffffff, /* nonexistent */ 0x00060108, 0x00000000, /* DDR400 FSB533 */ 0x04020108, 0x00000000, /* DDR533 FSB533 */ 0xffffffff, 0xffffffff, /* nonexistent */ 0x00040318, 0x00000000, /* DDR400 FSB667 */ 0x04020118, 0x00000000, /* DDR533 FSB667 */ 0x02010804, 0x00000000, /* DDR667 FSB667 */ 0xffffffff, 0xffffffff, /* nonexistent */ 0xffffffff, 0xffffffff, /* nonexistent */ 0xffffffff, 0xffffffff, /* nonexistent */ 0xffffffff, 0xffffffff, /* nonexistent */ 0xffffffff, 0xffffffff, /* nonexistent */ 0xffffffff, 0xffffffff, /* nonexistent */ }; #elif CONFIG(NORTHBRIDGE_INTEL_SUBTYPE_I945GC) /* i945 G/P */ static const u32 data_clock_crossing[] = { 0xffffffff, 0xffffffff, /* nonexistent */ 0xffffffff, 0xffffffff, /* nonexistent */ 0xffffffff, 0xffffffff, /* nonexistent */ 0x10080201, 0x00000000, /* DDR400 FSB533 */ 0x00100401, 0x00000000, /* DDR533 FSB533 */ 0x00010402, 0x00000000, /* DDR667 FSB533 - fake values */ 0xffffffff, 0xffffffff, /* nonexistent */ 0xffffffff, 0xffffffff, /* nonexistent */ 0xffffffff, 0xffffffff, /* nonexistent */ 0x04020108, 0x00000000, /* DDR400 FSB800 */ 0x00020108, 0x00000000, /* DDR533 FSB800 */ 0x00080201, 0x00000000, /* DDR667 FSB800 */ 0x00010402, 0x00000000, /* DDR400 FSB1066 */ 0x04020108, 0x00000000, /* DDR533 FSB1066 */ 0x08040110, 0x00000000, /* DDR667 FSB1066 */ }; static const u32 command_clock_crossing[] = { 0xffffffff, 0xffffffff, /* nonexistent */ 0xffffffff, 0xffffffff, /* nonexistent */ 0xffffffff, 0xffffffff, /* nonexistent */ 0x00010800, 0x00000402, /* DDR400 FSB533 */ 0x01000400, 0x00000200, /* DDR533 FSB533 */ 0x00020904, 0x00000000, /* DDR667 FSB533 - fake values */ 0xffffffff, 0xffffffff, /* nonexistent */ 0xffffffff, 0xffffffff, /* nonexistent */ 0xffffffff, 0xffffffff, /* nonexistent */ 0x02010804, 0x00000000, /* DDR400 FSB800 */ 0x00010402, 0x00000000, /* DDR533 FSB800 */ 0x04020130, 0x00000008, /* DDR667 FSB800 */ 0x00020904, 0x00000000, /* DDR400 FSB1066 */ 0x02010804, 0x00000000, /* DDR533 FSB1066 */ 0x180601c0, 0x00000020, /* DDR667 FSB1066 */ }; #endif printk(BIOS_DEBUG, "Programming Clock Crossing..."); printk(BIOS_DEBUG, "MEM="); switch (memclk()) { case 400: printk(BIOS_DEBUG, "400"); idx += 0; break; case 533: printk(BIOS_DEBUG, "533"); idx += 2; break; case 667: printk(BIOS_DEBUG, "667"); idx += 4; break; default: printk(BIOS_DEBUG, "RSVD %x", memclk()); return; } printk(BIOS_DEBUG, " FSB="); switch (fsbclk()) { case 400: printk(BIOS_DEBUG, "400"); idx += 0; break; case 533: printk(BIOS_DEBUG, "533"); idx += 6; break; case 667: printk(BIOS_DEBUG, "667"); idx += 12; break; case 800: printk(BIOS_DEBUG, "800"); idx += 18; break; case 1066: printk(BIOS_DEBUG, "1066"); idx += 24; break; default: printk(BIOS_DEBUG, "RSVD %x\n", fsbclk()); return; } if (command_clock_crossing[idx] == 0xffffffff) printk(BIOS_DEBUG, "Invalid MEM/FSB combination!\n"); mchbar_write32(CCCFT + 0, command_clock_crossing[idx]); mchbar_write32(CCCFT + 4, command_clock_crossing[idx + 1]); mchbar_write32(C0DCCFT + 0, data_clock_crossing[idx]); mchbar_write32(C0DCCFT + 4, data_clock_crossing[idx + 1]); mchbar_write32(C1DCCFT + 0, data_clock_crossing[idx]); mchbar_write32(C1DCCFT + 4, data_clock_crossing[idx + 1]); printk(BIOS_DEBUG, "... ok\n"); } static void sdram_disable_fast_dispatch(void) { u32 reg32; reg32 = mchbar_read32(FSBPMC3); reg32 |= (1 << 1); mchbar_write32(FSBPMC3, reg32); reg32 = mchbar_read32(SBTEST); reg32 |= (3 << 1); mchbar_write32(SBTEST, reg32); } static void sdram_pre_jedec_initialization(void) { u32 reg32; reg32 = mchbar_read32(WCC); reg32 &= 0x113ff3ff; reg32 |= (4 << 29) | (3 << 25) | (1 << 10); mchbar_write32(WCC, reg32); mchbar_setbits32(SMVREFC, 1 << 6); mchbar_clrbits32(MMARB0, 3 << 17); mchbar_setbits32(MMARB0, 1 << 21 | 1 << 16); mchbar_clrbits32(MMARB1, 7 << 8); mchbar_setbits32(MMARB1, 3 << 8); /* Adaptive Idle Timer Control */ mchbar_write32(C0AIT + 0, 0x000006c4); mchbar_write32(C0AIT + 4, 0x871a066d); mchbar_write32(C1AIT + 0, 0x000006c4); mchbar_write32(C1AIT + 4, 0x871a066d); } #define EA_DUALCHANNEL_XOR_BANK_RANK_MODE (0xd4 << 24) #define EA_DUALCHANNEL_XOR_BANK_MODE (0xf4 << 24) #define EA_DUALCHANNEL_BANK_RANK_MODE (0xc2 << 24) #define EA_DUALCHANNEL_BANK_MODE (0xe2 << 24) #define EA_SINGLECHANNEL_XOR_BANK_RANK_MODE (0x91 << 24) #define EA_SINGLECHANNEL_XOR_BANK_MODE (0xb1 << 24) #define EA_SINGLECHANNEL_BANK_RANK_MODE (0x80 << 24) #define EA_SINGLECHANNEL_BANK_MODE (0xa0 << 24) static void sdram_enhanced_addressing_mode(struct sys_info *sysinfo) { u32 chan0 = 0, chan1 = 0; bool chan0_dualsided, chan1_dualsided, chan0_populated, chan1_populated; chan0_populated = (sysinfo->dimm[0] != SYSINFO_DIMM_NOT_POPULATED || sysinfo->dimm[1] != SYSINFO_DIMM_NOT_POPULATED); chan1_populated = (sysinfo->dimm[2] != SYSINFO_DIMM_NOT_POPULATED || sysinfo->dimm[3] != SYSINFO_DIMM_NOT_POPULATED); chan0_dualsided = (sysinfo->banksize[1] || sysinfo->banksize[3]); chan1_dualsided = (sysinfo->banksize[5] || sysinfo->banksize[7]); if (sdram_capabilities_enhanced_addressing_xor()) { if (!sysinfo->interleaved) { /* Single Channel & Dual Channel Asymmetric */ if (chan0_populated) { if (chan0_dualsided) chan0 = EA_SINGLECHANNEL_XOR_BANK_RANK_MODE; else chan0 = EA_SINGLECHANNEL_XOR_BANK_MODE; } if (chan1_populated) { if (chan1_dualsided) chan1 = EA_SINGLECHANNEL_XOR_BANK_RANK_MODE; else chan1 = EA_SINGLECHANNEL_XOR_BANK_MODE; } } else { /* Interleaved has always both channels populated */ if (chan0_dualsided) chan0 = EA_DUALCHANNEL_XOR_BANK_RANK_MODE; else chan0 = EA_DUALCHANNEL_XOR_BANK_MODE; if (chan1_dualsided) chan1 = EA_DUALCHANNEL_XOR_BANK_RANK_MODE; else chan1 = EA_DUALCHANNEL_XOR_BANK_MODE; } } else { if (!sysinfo->interleaved) { /* Single Channel & Dual Channel Asymmetric */ if (chan0_populated) { if (chan0_dualsided) chan0 = EA_SINGLECHANNEL_BANK_RANK_MODE; else chan0 = EA_SINGLECHANNEL_BANK_MODE; } if (chan1_populated) { if (chan1_dualsided) chan1 = EA_SINGLECHANNEL_BANK_RANK_MODE; else chan1 = EA_SINGLECHANNEL_BANK_MODE; } } else { /* Interleaved has always both channels populated */ if (chan0_dualsided) chan0 = EA_DUALCHANNEL_BANK_RANK_MODE; else chan0 = EA_DUALCHANNEL_BANK_MODE; if (chan1_dualsided) chan1 = EA_DUALCHANNEL_BANK_RANK_MODE; else chan1 = EA_DUALCHANNEL_BANK_MODE; } } mchbar_clrbits32(C0DRC1, 0xff << 24); mchbar_setbits32(C0DRC1, chan0); mchbar_clrbits32(C1DRC1, 0xff << 24); mchbar_setbits32(C1DRC1, chan1); } static void sdram_post_jedec_initialization(struct sys_info *sysinfo) { u32 reg32; /* Enable Channel XORing for Dual Channel Interleave */ if (sysinfo->interleaved) { reg32 = mchbar_read32(DCC); reg32 &= ~(1 << 10); reg32 |= (1 << 9); mchbar_write32(DCC, reg32); } /* DRAM mode optimizations */ sdram_enhanced_addressing_mode(sysinfo); reg32 = mchbar_read32(FSBPMC3); reg32 &= ~(1 << 1); mchbar_write32(FSBPMC3, reg32); reg32 = mchbar_read32(SBTEST); reg32 &= ~(1 << 2); mchbar_write32(SBTEST, reg32); reg32 = mchbar_read32(SBOCC); reg32 &= 0xffbdb6ff; reg32 |= (0xbdb6 << 8) | (1 << 0); mchbar_write32(SBOCC, reg32); } static void sdram_power_management(struct sys_info *sysinfo) { u16 reg16; u32 reg32; int integrated_graphics = 1; int i; if (!(pci_read_config8(HOST_BRIDGE, DEVEN) & (DEVEN_D2F0 | DEVEN_D2F1))) integrated_graphics = false; reg32 = mchbar_read32(C0DRT2); reg32 &= 0xffffff00; /* Idle timer = 8 clocks, CKE idle timer = 16 clocks */ reg32 |= (1 << 5) | (1 << 4); mchbar_write32(C0DRT2, reg32); reg32 = mchbar_read32(C1DRT2); reg32 &= 0xffffff00; /* Idle timer = 8 clocks, CKE idle timer = 16 clocks */ reg32 |= (1 << 5) | (1 << 4); mchbar_write32(C1DRT2, reg32); reg32 = mchbar_read32(C0DRC1); reg32 |= (1 << 12) | (1 << 11); mchbar_write32(C0DRC1, reg32); reg32 = mchbar_read32(C1DRC1); reg32 |= (1 << 12) | (1 << 11); mchbar_write32(C1DRC1, reg32); if (CONFIG(NORTHBRIDGE_INTEL_SUBTYPE_I945GM)) { if (i945_silicon_revision() > 1) { /* FIXME bits 5 and 0 only if PCIe graphics is disabled */ u16 peg_bits = (1 << 5) | (1 << 0); mchbar_write16(UPMC1, 0x1010 | peg_bits); } else { /* FIXME bits 5 and 0 only if PCIe graphics is disabled */ u16 peg_bits = (1 << 5) | (1 << 0); /* Rev 0 and 1 */ mchbar_write16(UPMC1, 0x0010 | peg_bits); } } reg16 = mchbar_read16(UPMC2); reg16 &= 0xfc00; reg16 |= 0x0100; mchbar_write16(UPMC2, reg16); mchbar_write32(UPMC3, 0x000f06ff); for (i = 0; i < 5; i++) { mchbar_clrbits32(UPMC3, 1 << 16); mchbar_setbits32(UPMC3, 1 << 16); } mchbar_write32(GIPMC1, 0x8000000c); reg16 = mchbar_read16(CPCTL); reg16 &= ~(7 << 11); if (i945_silicon_revision() > 2) reg16 |= (6 << 11); else reg16 |= (4 << 11); mchbar_write16(CPCTL, reg16); #if 0 if ((mchbar_read32(ECO) & (1 << 16)) != 0) { #else if (i945_silicon_revision() != 0) { #endif switch (sysinfo->fsb_frequency) { case 667: mchbar_write32(HGIPMC2, 0x0d590d59); break; case 533: mchbar_write32(HGIPMC2, 0x155b155b); break; } } else { switch (sysinfo->fsb_frequency) { case 667: mchbar_write32(HGIPMC2, 0x09c409c4); break; case 533: mchbar_write32(HGIPMC2, 0x0fa00fa0); break; } } mchbar_write32(FSBPMC1, 0x8000000c); reg32 = mchbar_read32(C2C3TT); reg32 &= 0xffff0000; switch (sysinfo->fsb_frequency) { case 667: reg32 |= 0x0600; break; case 533: reg32 |= 0x0480; break; } mchbar_write32(C2C3TT, reg32); reg32 = mchbar_read32(C3C4TT); reg32 &= 0xffff0000; switch (sysinfo->fsb_frequency) { case 667: reg32 |= 0x0b80; break; case 533: reg32 |= 0x0980; break; } mchbar_write32(C3C4TT, reg32); if (i945_silicon_revision() == 0) mchbar_clrbits32(ECO, 1 << 16); else mchbar_setbits32(ECO, 1 << 16); mchbar_clrbits32(FSBPMC3, 1 << 29); mchbar_setbits32(FSBPMC3, 1 << 21); mchbar_clrbits32(FSBPMC3, 1 << 19); mchbar_clrbits32(FSBPMC3, 1 << 13); reg32 = mchbar_read32(FSBPMC4); reg32 &= ~(3 << 24); reg32 |= (2 << 24); mchbar_write32(FSBPMC4, reg32); mchbar_setbits32(FSBPMC4, 1 << 21); mchbar_setbits32(FSBPMC4, 1 << 5); if ((i945_silicon_revision() < 2)) { /* || cpuid() = 0x6e8 */ /* stepping 0 and 1 or CPUID 6e8 */ mchbar_clrbits32(FSBPMC4, 1 << 4); } else { mchbar_setbits32(FSBPMC4, 1 << 4); } pci_or_config8(HOST_BRIDGE, 0xfc, 1 << 4); pci_or_config8(IGD_DEV, 0xc1, 1 << 2); if (integrated_graphics) { mchbar_write16(MIPMC4, 0x04f8); mchbar_write16(MIPMC5, 0x04fc); mchbar_write16(MIPMC6, 0x04fc); } else { mchbar_write16(MIPMC4, 0x64f8); mchbar_write16(MIPMC5, 0x64fc); mchbar_write16(MIPMC6, 0x64fc); } reg32 = mchbar_read32(PMCFG); reg32 &= ~(3 << 17); reg32 |= (2 << 17); mchbar_write32(PMCFG, reg32); mchbar_setbits32(PMCFG, 1 << 4); reg32 = mchbar_read32(UPMC4); reg32 &= 0xffffff00; reg32 |= 0x01; mchbar_write32(UPMC4, reg32); mchbar_clrbits32(0xb18, 1 << 21); } static void sdram_thermal_management(void) { mchbar_write8(TCO1, 0); mchbar_write8(TCO0, 0); /* The Thermal Sensors for DIMMs at 0x50, 0x52 are at I2C addr 0x30/0x32. */ /* TODO This is not implemented yet. Volunteers? */ } static void sdram_save_receive_enable(void) { int i; u32 reg32; u8 values[4]; /* The following values are stored to an unused CMOS area and restored instead of * recalculated in case of an S3 resume. * * C0WL0REOST [7:0] -> 8 bit * C1WL0REOST [7:0] -> 8 bit * RCVENMT [11:8] [3:0] -> 8 bit * C0DRT1 [27:24] -> 4 bit * C1DRT1 [27:24] -> 4 bit */ values[0] = mchbar_read8(C0WL0REOST); values[1] = mchbar_read8(C1WL0REOST); reg32 = mchbar_read32(RCVENMT); values[2] = (u8)((reg32 >> (8 - 4)) & 0xf0) | (reg32 & 0x0f); reg32 = mchbar_read32(C0DRT1); values[3] = (reg32 >> 24) & 0x0f; reg32 = mchbar_read32(C1DRT1); values[3] |= (reg32 >> (24 - 4)) & 0xf0; /* coreboot only uses bytes 0 - 127 for its CMOS values so far * so we grab bytes 128 - 131 to save the receive enable values */ for (i = 0; i < 4; i++) cmos_write(values[i], 128 + i); } static void sdram_recover_receive_enable(void) { int i; u32 reg32; u8 values[4]; for (i = 0; i < 4; i++) values[i] = cmos_read(128 + i); mchbar_write8(C0WL0REOST, values[0]); mchbar_write8(C1WL0REOST, values[1]); reg32 = mchbar_read32(RCVENMT); reg32 &= ~((0x0f << 8) | (0x0f << 0)); reg32 |= ((u32)(values[2] & 0xf0) << (8 - 4)) | (values[2] & 0x0f); mchbar_write32(RCVENMT, reg32); reg32 = mchbar_read32(C0DRT1) & ~(0x0f << 24); reg32 |= (u32)(values[3] & 0x0f) << 24; mchbar_write32(C0DRT1, reg32); reg32 = mchbar_read32(C1DRT1) & ~(0x0f << 24); reg32 |= (u32)(values[3] & 0xf0) << (24 - 4); mchbar_write32(C1DRT1, reg32); } static void sdram_program_receive_enable(struct sys_info *sysinfo) { mchbar_setbits32(REPC, 1 << 0); /* Program Receive Enable Timings */ if (sysinfo->boot_path == BOOT_PATH_RESUME) { sdram_recover_receive_enable(); } else { receive_enable_adjust(sysinfo); sdram_save_receive_enable(); } mchbar_setbits32(C0DRC1, 1 << 6); mchbar_setbits32(C1DRC1, 1 << 6); mchbar_clrbits32(C0DRC1, 1 << 6); mchbar_clrbits32(C1DRC1, 1 << 6); mchbar_setbits32(MIPMC3, 0x0f << 0); } /** * @brief Enable On-Die Termination for DDR2. * */ static void sdram_on_die_termination(struct sys_info *sysinfo) { static const u32 odt[] = { 0x00024911, 0xe0010000, 0x00049211, 0xe0020000, 0x0006db11, 0xe0030000, }; u32 reg32; int cas; reg32 = mchbar_read32(ODTC); reg32 &= ~(3 << 16); reg32 |= (1 << 14) | (1 << 6) | (2 << 16); mchbar_write32(ODTC, reg32); if (sysinfo->dimm[0] == SYSINFO_DIMM_NOT_POPULATED || sysinfo->dimm[1] == SYSINFO_DIMM_NOT_POPULATED) { printk(BIOS_DEBUG, "one dimm per channel config..\n"); reg32 = mchbar_read32(C0ODT); reg32 &= ~(7 << 28); mchbar_write32(C0ODT, reg32); reg32 = mchbar_read32(C1ODT); reg32 &= ~(7 << 28); mchbar_write32(C1ODT, reg32); } cas = sysinfo->cas; reg32 = mchbar_read32(C0ODT) & 0xfff00000; reg32 |= odt[(cas - 3) * 2]; mchbar_write32(C0ODT, reg32); reg32 = mchbar_read32(C1ODT) & 0xfff00000; reg32 |= odt[(cas - 3) * 2]; mchbar_write32(C1ODT, reg32); reg32 = mchbar_read32(C0ODT + 4) & 0x1fc8ffff; reg32 |= odt[((cas - 3) * 2) + 1]; mchbar_write32(C0ODT + 4, reg32); reg32 = mchbar_read32(C1ODT + 4) & 0x1fc8ffff; reg32 |= odt[((cas - 3) * 2) + 1]; mchbar_write32(C1ODT + 4, reg32); } /** * @brief Enable clocks to populated sockets */ static void sdram_enable_memory_clocks(struct sys_info *sysinfo) { u8 clocks[2] = { 0, 0 }; #if CONFIG(NORTHBRIDGE_INTEL_SUBTYPE_I945GM) #define CLOCKS_WIDTH 2 #elif CONFIG(NORTHBRIDGE_INTEL_SUBTYPE_I945GC) #define CLOCKS_WIDTH 3 #endif if (sysinfo->dimm[0] != SYSINFO_DIMM_NOT_POPULATED) clocks[0] |= (1 << CLOCKS_WIDTH) - 1; if (sysinfo->dimm[1] != SYSINFO_DIMM_NOT_POPULATED) clocks[0] |= ((1 << CLOCKS_WIDTH) - 1) << CLOCKS_WIDTH; if (sysinfo->dimm[2] != SYSINFO_DIMM_NOT_POPULATED) clocks[1] |= (1 << CLOCKS_WIDTH) - 1; if (sysinfo->dimm[3] != SYSINFO_DIMM_NOT_POPULATED) clocks[1] |= ((1 << CLOCKS_WIDTH) - 1) << CLOCKS_WIDTH; #if CONFIG(OVERRIDE_CLOCK_DISABLE) /* Usually system firmware turns off system memory clock signals to unused SO-DIMM slots * to reduce EMI and power consumption. * However, the Kontron 986LCD-M does not like unused clock signals to be disabled. */ clocks[0] = 0xf; /* force all clock gate pairs to enable */ clocks[1] = 0xf; /* force all clock gate pairs to enable */ #endif mchbar_write8(C0DCLKDIS, clocks[0]); mchbar_write8(C1DCLKDIS, clocks[1]); } #define RTT_ODT_NONE 0 #define RTT_ODT_50_OHM ((1 << 9) | (1 << 5)) #define RTT_ODT_75_OHM (1 << 5) #define RTT_ODT_150_OHM (1 << 9) #define EMRS_OCD_DEFAULT ((1 << 12) | (1 << 11) | (1 << 10)) #define MRS_CAS_3 (3 << 7) #define MRS_CAS_4 (4 << 7) #define MRS_CAS_5 (5 << 7) #define MRS_TWR_3 (2 << 12) #define MRS_TWR_4 (3 << 12) #define MRS_TWR_5 (4 << 12) #define MRS_BT (1 << 6) #define MRS_BL4 (2 << 3) #define MRS_BL8 (3 << 3) static void sdram_jedec_enable(struct sys_info *sysinfo) { int i, nonzero; u32 bankaddr = 0, tmpaddr, mrsaddr = 0; for (i = 0, nonzero = -1; i < 8; i++) { if (sysinfo->banksize[i] == 0) continue; printk(BIOS_DEBUG, "jedec enable sequence: bank %d\n", i); if (nonzero != -1) { if (sysinfo->interleaved && nonzero < 4 && i >= 4) { bankaddr = 0x40; } else { printk(BIOS_DEBUG, "bankaddr from bank size of rank %d\n", nonzero); bankaddr += sysinfo->banksize[nonzero] << (sysinfo->interleaved ? 26 : 25); } } /* * We have a bank with a non-zero size... Remember it * for the next offset we have to calculate */ nonzero = i; /* Get CAS latency set up */ switch (sysinfo->cas) { case 5: mrsaddr = MRS_CAS_5; break; case 4: mrsaddr = MRS_CAS_4; break; case 3: mrsaddr = MRS_CAS_3; break; default: die("Jedec Error (CAS).\n"); } /* Get tWR set */ switch (sysinfo->twr) { case 5: mrsaddr |= MRS_TWR_5; break; case 4: mrsaddr |= MRS_TWR_4; break; case 3: mrsaddr |= MRS_TWR_3; break; default: die("Jedec Error (tWR).\n"); } /* Set "Burst Type" */ mrsaddr |= MRS_BT; /* Interleaved */ if (sysinfo->interleaved) mrsaddr = mrsaddr << 1; /* Only burst length 8 supported */ mrsaddr |= MRS_BL8; /* Apply NOP */ PRINTK_DEBUG("Apply NOP\n"); do_ram_command(RAM_COMMAND_NOP); ram_read32(bankaddr); /* Precharge all banks */ PRINTK_DEBUG("All Banks Precharge\n"); do_ram_command(RAM_COMMAND_PRECHARGE); ram_read32(bankaddr); /* Extended Mode Register Set (2) */ PRINTK_DEBUG("Extended Mode Register Set(2)\n"); do_ram_command(RAM_COMMAND_EMRS | RAM_EMRS_2); ram_read32(bankaddr); /* Extended Mode Register Set (3) */ PRINTK_DEBUG("Extended Mode Register Set(3)\n"); do_ram_command(RAM_COMMAND_EMRS | RAM_EMRS_3); ram_read32(bankaddr); /* Extended Mode Register Set */ PRINTK_DEBUG("Extended Mode Register Set\n"); do_ram_command(RAM_COMMAND_EMRS | RAM_EMRS_1); tmpaddr = bankaddr; if (!sdram_capabilities_dual_channel()) tmpaddr |= RTT_ODT_75_OHM; else if (sysinfo->interleaved) tmpaddr |= (RTT_ODT_150_OHM << 1); else tmpaddr |= RTT_ODT_150_OHM; ram_read32(tmpaddr); /* Mode Register Set: Reset DLLs */ PRINTK_DEBUG("MRS: Reset DLLs\n"); do_ram_command(RAM_COMMAND_MRS); tmpaddr = bankaddr; tmpaddr |= mrsaddr; /* Set DLL reset bit */ if (sysinfo->interleaved) tmpaddr |= (1 << 12); else tmpaddr |= (1 << 11); ram_read32(tmpaddr); /* Precharge all banks */ PRINTK_DEBUG("All Banks Precharge\n"); do_ram_command(RAM_COMMAND_PRECHARGE); ram_read32(bankaddr); /* CAS before RAS Refresh */ PRINTK_DEBUG("CAS before RAS\n"); do_ram_command(RAM_COMMAND_CBR); /* CBR wants two READs */ ram_read32(bankaddr); ram_read32(bankaddr); /* Mode Register Set: Enable DLLs */ PRINTK_DEBUG("MRS: Enable DLLs\n"); do_ram_command(RAM_COMMAND_MRS); tmpaddr = bankaddr; tmpaddr |= mrsaddr; ram_read32(tmpaddr); /* Extended Mode Register Set */ PRINTK_DEBUG("Extended Mode Register Set: ODT/OCD\n"); do_ram_command(RAM_COMMAND_EMRS | RAM_EMRS_1); tmpaddr = bankaddr; if (!sdram_capabilities_dual_channel()) tmpaddr |= RTT_ODT_75_OHM | EMRS_OCD_DEFAULT; else if (sysinfo->interleaved) tmpaddr |= ((RTT_ODT_150_OHM | EMRS_OCD_DEFAULT) << 1); else tmpaddr |= RTT_ODT_150_OHM | EMRS_OCD_DEFAULT; ram_read32(tmpaddr); /* Extended Mode Register Set */ PRINTK_DEBUG("Extended Mode Register Set: OCD Exit\n"); do_ram_command(RAM_COMMAND_EMRS | RAM_EMRS_1); tmpaddr = bankaddr; if (!sdram_capabilities_dual_channel()) tmpaddr |= RTT_ODT_75_OHM; else if (sysinfo->interleaved) tmpaddr |= (RTT_ODT_150_OHM << 1); else tmpaddr |= RTT_ODT_150_OHM; ram_read32(tmpaddr); } } static void sdram_init_complete(void) { PRINTK_DEBUG("Normal Operation\n"); do_ram_command(RAM_COMMAND_NORMAL); } static void sdram_setup_processor_side(void) { if (i945_silicon_revision() == 0) mchbar_setbits32(FSBPMC3, 1 << 2); mchbar_setbits8(0xb00, 1); if (i945_silicon_revision() == 0) mchbar_setbits32(SLPCTL, 1 << 8); } /** * @param boot_path: 0 = normal, 1 = reset, 2 = resume from s3 * @param spd_addresses pointer to a list of SPD addresses */ void sdram_initialize(int boot_path, const u8 *spd_addresses) { struct sys_info sysinfo; timestamp_add_now(TS_BEFORE_INITRAM); printk(BIOS_DEBUG, "Setting up RAM controller.\n"); memset(&sysinfo, 0, sizeof(sysinfo)); sysinfo.boot_path = boot_path; sysinfo.spd_addresses = spd_addresses; /* Look at the type of DIMMs and verify all DIMMs are x8 or x16 width */ sdram_get_dram_configuration(&sysinfo); /* If error, do cold boot */ sdram_detect_errors(&sysinfo); /* Program PLL settings */ sdram_program_pll_settings(&sysinfo); /* * Program Graphics Frequency * Set core display and render clock on 945GC to the max */ if (CONFIG(NORTHBRIDGE_INTEL_SUBTYPE_I945GM)) sdram_program_graphics_frequency(&sysinfo); else pci_write_config16(IGD_DEV, GCFC, 0x0534); /* Program System Memory Frequency */ sdram_program_memory_frequency(&sysinfo); /* Determine Mode of Operation (Interleaved etc) */ sdram_set_channel_mode(&sysinfo); /* Program Clock Crossing values */ sdram_program_clock_crossing(); /* Disable fast dispatch */ sdram_disable_fast_dispatch(); /* Enable WIODLL Power Down in ACPI states */ mchbar_setbits32(C0DMC, 1 << 24); mchbar_setbits32(C1DMC, 1 << 24); /* Program DRAM Row Boundary/Attribute Registers */ /* program row size DRB and set TOLUD */ sdram_program_row_boundaries(&sysinfo); /* program page size DRA */ sdram_set_row_attributes(&sysinfo); /* Program CxBNKARC */ sdram_set_bank_architecture(&sysinfo); /* Program DRAM Timing and Control registers based on SPD */ sdram_set_timing_and_control(&sysinfo); /* On-Die Termination Adjustment */ sdram_on_die_termination(&sysinfo); /* Pre Jedec Initialization */ sdram_pre_jedec_initialization(); /* Perform System Memory IO Initialization */ sdram_initialize_system_memory_io(&sysinfo); /* Perform System Memory IO Buffer Enable */ sdram_enable_system_memory_io(&sysinfo); /* Enable System Memory Clocks */ sdram_enable_memory_clocks(&sysinfo); if (boot_path == BOOT_PATH_NORMAL) { /* Jedec Initialization sequence */ sdram_jedec_enable(&sysinfo); } /* Program Power Management Registers */ sdram_power_management(&sysinfo); /* Post Jedec Init */ sdram_post_jedec_initialization(&sysinfo); /* Program DRAM Throttling */ sdram_thermal_management(); /* Normal Operations */ sdram_init_complete(); /* Program Receive Enable Timings */ sdram_program_receive_enable(&sysinfo); /* Enable Periodic RCOMP */ sdram_enable_rcomp(); /* Tell ICH7 that we're done */ pci_and_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_2, (u8)~(1 << 7)); printk(BIOS_DEBUG, "RAM initialization finished.\n"); sdram_setup_processor_side(); timestamp_add_now(TS_AFTER_INITRAM); }