/* SPDX-License-Identifier: GPL-2.0-only */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "chip.h" #include "haswell.h" struct gt_reg { u32 reg; u32 andmask; u32 ormask; }; static const struct gt_reg haswell_gt_setup[] = { /* Enable Counters */ { 0x0a248, 0x00000000, 0x00000016 }, { 0x0a000, 0x00000000, 0x00070020 }, { 0x0a180, 0xff3fffff, 0x15000000 }, /* Enable DOP Clock Gating */ { 0x09424, 0x00000000, 0x000003fd }, /* Enable Unit Level Clock Gating */ { 0x09400, 0x00000000, 0x00000080 }, { 0x09404, 0x00000000, 0x40401000 }, { 0x09408, 0x00000000, 0x00000000 }, { 0x0940c, 0x00000000, 0x02000001 }, { 0x0a008, 0x00000000, 0x08000000 }, /* Wake Rate Limits */ { 0x0a090, 0xffffffff, 0x00000000 }, { 0x0a098, 0xffffffff, 0x03e80000 }, { 0x0a09c, 0xffffffff, 0x00280000 }, { 0x0a0a8, 0xffffffff, 0x0001e848 }, { 0x0a0ac, 0xffffffff, 0x00000019 }, /* Render/Video/Blitter Idle Max Count */ { 0x02054, 0x00000000, 0x0000000a }, { 0x12054, 0x00000000, 0x0000000a }, { 0x22054, 0x00000000, 0x0000000a }, /* RC Sleep / RCx Thresholds */ { 0x0a0b0, 0xffffffff, 0x00000000 }, { 0x0a0b4, 0xffffffff, 0x000003e8 }, { 0x0a0b8, 0xffffffff, 0x0000c350 }, /* RP Settings */ { 0x0a010, 0xffffffff, 0x000f4240 }, { 0x0a014, 0xffffffff, 0x12060000 }, { 0x0a02c, 0xffffffff, 0x0000e808 }, { 0x0a030, 0xffffffff, 0x0003bd08 }, { 0x0a068, 0xffffffff, 0x000101d0 }, { 0x0a06c, 0xffffffff, 0x00055730 }, { 0x0a070, 0xffffffff, 0x0000000a }, /* RP Control */ { 0x0a024, 0x00000000, 0x00000b92 }, /* HW RC6 Control */ { 0x0a090, 0x00000000, 0x88040000 }, /* Video Frequency Request */ { 0x0a00c, 0x00000000, 0x08000000 }, { 0 }, }; static const struct gt_reg haswell_gt_lock[] = { { 0x0a248, 0xffffffff, 0x80000000 }, { 0x0a004, 0xffffffff, 0x00000010 }, { 0x0a080, 0xffffffff, 0x00000004 }, { 0x0a180, 0xffffffff, 0x80000000 }, { 0 }, }; /* * Some VGA option roms are used for several chipsets but they only have one PCI ID in their * header. If we encounter such an option rom, we need to do the mapping ourselves. */ u32 map_oprom_vendev(u32 vendev) { u32 new_vendev = vendev; switch (vendev) { case 0x80860402: /* GT1 Desktop */ case 0x80860406: /* GT1 Mobile */ case 0x8086040a: /* GT1 Server */ case 0x80860a06: /* GT1 ULT */ case 0x80860a0e: /* GT1 ULX */ case 0x80860412: /* GT2 Desktop */ case 0x80860416: /* GT2 Mobile */ case 0x8086041a: /* GT2 Server */ case 0x8086041e: /* GT1.5 Desktop */ case 0x80860a16: /* GT2 ULT */ case 0x80860a1e: /* GT2 ULX */ case 0x80860422: /* GT3 Desktop */ case 0x80860426: /* GT3 Mobile */ case 0x8086042a: /* GT3 Server */ case 0x80860a26: /* GT3 ULT */ case 0x80860d22: /* GT3e Desktop */ case 0x80860d16: /* GT1 Mobile 4+3 */ case 0x80860d26: /* GT2 Mobile 4+3, GT3e Mobile */ case 0x80860d36: /* GT3 Mobile 4+3 */ new_vendev = 0x80860406; /* GT1 Mobile */ break; } return new_vendev; } static struct resource *gtt_res = NULL; u32 gtt_read(u32 reg) { u32 val; val = read32(res2mmio(gtt_res, reg, 0)); return val; } void gtt_write(u32 reg, u32 data) { write32(res2mmio(gtt_res, reg, 0), data); } static inline void gtt_rmw(u32 reg, u32 andmask, u32 ormask) { u32 val = gtt_read(reg); val &= andmask; val |= ormask; gtt_write(reg, val); } static inline void gtt_write_regs(const struct gt_reg *gt) { for (; gt && gt->reg; gt++) { if (gt->andmask) gtt_rmw(gt->reg, gt->andmask, gt->ormask); else gtt_write(gt->reg, gt->ormask); } } #define GTT_RETRY 1000 int gtt_poll(u32 reg, u32 mask, u32 value) { unsigned int try = GTT_RETRY; u32 data; while (try--) { data = gtt_read(reg); if ((data & mask) == value) return 1; udelay(10); } printk(BIOS_ERR, "GT init timeout\n"); return 0; } static void power_well_enable(void) { gtt_write(HSW_PWR_WELL_CTL1, HSW_PWR_WELL_ENABLE); gtt_poll(HSW_PWR_WELL_CTL1, HSW_PWR_WELL_STATE, HSW_PWR_WELL_STATE); } static void gma_pm_init_pre_vbios(struct device *dev) { printk(BIOS_DEBUG, "GT Power Management Init\n"); gtt_res = probe_resource(dev, PCI_BASE_ADDRESS_0); if (!gtt_res || !gtt_res->base) return; power_well_enable(); /* * Enable RC6 */ /* Enable Force Wake */ gtt_write(0x0a180, 1 << 5); gtt_write(0x0a188, 0x00010001); gtt_poll(FORCEWAKE_ACK_HSW, 1 << 0, 1 << 0); /* GT Settings */ gtt_write_regs(haswell_gt_setup); /* Wait for Mailbox Ready */ gtt_poll(0x138124, (1 << 31), (0 << 31)); /* Mailbox Data - RC6 VIDS */ gtt_write(0x138128, 0x00000000); /* Mailbox Command */ gtt_write(0x138124, 0x80000004); /* Wait for Mailbox Ready */ gtt_poll(0x138124, (1 << 31), (0 << 31)); /* Enable PM Interrupts */ gtt_write(GEN6_PMIER, GEN6_PM_MBOX_EVENT | GEN6_PM_THERMAL_EVENT | GEN6_PM_RP_DOWN_TIMEOUT | GEN6_PM_RP_UP_THRESHOLD | GEN6_PM_RP_DOWN_THRESHOLD | GEN6_PM_RP_UP_EI_EXPIRED | GEN6_PM_RP_DOWN_EI_EXPIRED); /* Enable RC6 in idle */ gtt_write(0x0a094, 0x00040000); /* PM Lock Settings */ gtt_write_regs(haswell_gt_lock); } static void init_display_planes(void) { int pipe, plane; /* Disable cursor mode */ for (pipe = PIPE_A; pipe <= PIPE_C; pipe++) { gtt_write(CURCNTR_IVB(pipe), CURSOR_MODE_DISABLE); gtt_write(CURBASE_IVB(pipe), 0x00000000); } /* Disable primary plane and set surface base address */ for (plane = PLANE_A; plane <= PLANE_C; plane++) { gtt_write(DSPCNTR(plane), DISPLAY_PLANE_DISABLE); gtt_write(DSPSURF(plane), 0x00000000); } /* Disable VGA display */ gtt_write(CPU_VGACNTRL, CPU_VGA_DISABLE); } static void gma_setup_panel(struct device *dev) { struct northbridge_intel_haswell_config *conf = config_of(dev); const struct i915_gpu_panel_config *panel_cfg = &conf->panel_cfg; u32 reg32; /* Setup Digital Port Hotplug */ reg32 = gtt_read(PCH_PORT_HOTPLUG); if (!reg32) { reg32 = (conf->gpu_dp_b_hotplug & 0x7) << 2; reg32 |= (conf->gpu_dp_c_hotplug & 0x7) << 10; reg32 |= (conf->gpu_dp_d_hotplug & 0x7) << 18; gtt_write(PCH_PORT_HOTPLUG, reg32); } /* Setup Panel Power On Delays */ reg32 = gtt_read(PCH_PP_ON_DELAYS); if (!reg32) { reg32 |= ((panel_cfg->up_delay_ms * 10) & 0x1fff) << 16; reg32 |= (panel_cfg->backlight_on_delay_ms * 10) & 0x1fff; gtt_write(PCH_PP_ON_DELAYS, reg32); } /* Setup Panel Power Off Delays */ reg32 = gtt_read(PCH_PP_OFF_DELAYS); if (!reg32) { reg32 = ((panel_cfg->down_delay_ms * 10) & 0x1fff) << 16; reg32 |= (panel_cfg->backlight_off_delay_ms * 10) & 0x1fff; gtt_write(PCH_PP_OFF_DELAYS, reg32); } /* Setup Panel Power Cycle Delay */ if (panel_cfg->cycle_delay_ms) { reg32 = gtt_read(PCH_PP_DIVISOR); reg32 &= ~0x1f; reg32 |= (DIV_ROUND_UP(panel_cfg->cycle_delay_ms, 100) + 1) & 0x1f; gtt_write(PCH_PP_DIVISOR, reg32); } /* Enforce the PCH PWM function, as so does Linux. The CPU PWM controls are disabled after reset. */ if (panel_cfg->backlight_pwm_hz) { /* Reference clock is either 24MHz or 135MHz. We can choose either a 16 or a 128 step increment. Use 16 if we would have less than 100 steps otherwise. */ const unsigned int refclock = CONFIG(INTEL_LYNXPOINT_LP) ? 24*MHz : 135*MHz; const unsigned int hz_limit = refclock / 128 / 100; unsigned int pwm_increment, pwm_period; u32 south_chicken2; south_chicken2 = gtt_read(SOUTH_CHICKEN2); if (panel_cfg->backlight_pwm_hz > hz_limit) { pwm_increment = 16; south_chicken2 |= LPT_PWM_GRANULARITY; } else { pwm_increment = 128; south_chicken2 &= ~LPT_PWM_GRANULARITY; } gtt_write(SOUTH_CHICKEN2, south_chicken2); pwm_period = refclock / pwm_increment / panel_cfg->backlight_pwm_hz; printk(BIOS_INFO, "GMA: Setting backlight PWM frequency to %uMHz / %u / %u = %uHz\n", refclock / MHz, pwm_increment, pwm_period, DIV_ROUND_CLOSEST(refclock, pwm_increment * pwm_period)); /* Start with a 50% duty cycle. */ gtt_write(BLC_PWM_PCH_CTL2, pwm_period << 16 | pwm_period / 2); gtt_write(BLC_PWM_PCH_CTL1, (panel_cfg->backlight_polarity == GPU_BACKLIGHT_POLARITY_LOW) << 29 | BLM_PCH_OVERRIDE_ENABLE | BLM_PCH_PWM_ENABLE); } /* Get display,pipeline,and DDI registers into a basic sane state */ power_well_enable(); init_display_planes(); /* * DDI-A params set: * bit 0: Display detected (RO) * bit 4: DDI A supports 4 lanes and DDI E is not used * bit 7: DDI buffer is idle */ reg32 = DDI_BUF_IS_IDLE | DDI_INIT_DISPLAY_DETECTED; if (!conf->gpu_ddi_e_connected) reg32 |= DDI_A_4_LANES; gtt_write(DDI_BUF_CTL_A, reg32); /* Set FDI registers - is this required? */ gtt_write(_FDI_RXA_MISC, 0x00200090); gtt_write(_FDI_RXA_MISC, 0x0a000000); /* Enable the handshake with PCH display when processing reset */ gtt_write(NDE_RSTWRN_OPT, RST_PCH_HNDSHK_EN); /* Undocumented */ gtt_write(0x42090, 0x04000000); gtt_write(0x9840, 0x00000000); gtt_write(0x42090, 0xa4000000); gtt_write(SOUTH_DSPCLK_GATE_D, PCH_LP_PARTITION_LEVEL_DISABLE); /* Undocumented */ gtt_write(0x42080, 0x00004000); /* Prepare DDI buffers for DP and FDI */ intel_prepare_ddi(); /* Hot plug detect buffer enabled for port A */ gtt_write(DIGITAL_PORT_HOTPLUG_CNTRL, DIGITAL_PORTA_HOTPLUG_ENABLE); /* Enable HPD buffer for digital port D and B */ gtt_write(PCH_PORT_HOTPLUG, PORTD_HOTPLUG_ENABLE | PORTB_HOTPLUG_ENABLE); /* * Bits 4:0 - Power cycle delay (default 0x6 --> 500ms) * Bits 31:8 - Reference divider (0x0004af ----> 24MHz) */ gtt_write(PCH_PP_DIVISOR, 0x0004af06); } static void gma_pm_init_post_vbios(struct device *dev) { int cdclk = 0; int devid = pci_read_config16(dev, PCI_DEVICE_ID); int gpu_is_ulx = 0; if (devid == 0x0a0e || devid == 0x0a1e) gpu_is_ulx = 1; /* CD Frequency */ if ((gtt_read(0x42014) & 0x1000000) || gpu_is_ulx || haswell_is_ult()) cdclk = 0; /* fixed frequency */ else cdclk = 2; /* variable frequency */ if (gpu_is_ulx || cdclk != 0) gtt_rmw(0x130040, 0xf7ffffff, 0x04000000); else gtt_rmw(0x130040, 0xf3ffffff, 0x00000000); /* More magic */ if (haswell_is_ult() || gpu_is_ulx) { if (!gpu_is_ulx) gtt_write(0x138128, 0x00000000); else gtt_write(0x138128, 0x00000001); gtt_write(0x13812c, 0x00000000); gtt_write(0x138124, 0x80000017); } /* Disable Force Wake */ gtt_write(0x0a188, 0x00010000); gtt_poll(FORCEWAKE_ACK_HSW, 1 << 0, 0 << 0); gtt_write(0x0a188, 0x00000001); } /* Enable SCI to ACPI _GPE._L06 */ static void gma_enable_swsci(void) { u16 reg16; /* Clear DMISCI status */ reg16 = inw(get_pmbase() + TCO1_STS); reg16 &= DMISCI_STS; outw(reg16, get_pmbase() + TCO1_STS); /* Clear and enable ACPI TCO SCI */ enable_tco_sci(); } static void gma_func0_init(struct device *dev) { int lightup_ok = 0; intel_gma_init_igd_opregion(); /* Init graphics power management */ gma_pm_init_pre_vbios(dev); /* Pre panel init */ gma_setup_panel(dev); if (!CONFIG(NO_GFX_INIT)) pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_MASTER); int vga_disable = (pci_read_config16(dev, GGC) & 2) >> 1; if (CONFIG(MAINBOARD_USE_LIBGFXINIT)) { if (vga_disable) { printk(BIOS_INFO, "IGD is not decoding legacy VGA MEM and IO: skipping NATIVE graphic init\n"); } else { printk(BIOS_SPEW, "NATIVE graphics, run native enable\n"); gma_gfxinit(&lightup_ok); gfx_set_init_done(1); } } if (!lightup_ok) { printk(BIOS_SPEW, "FUI did not run; using VBIOS\n"); pci_dev_init(dev); } printk(BIOS_DEBUG, "GT Power Management Init (post VBIOS)\n"); gma_pm_init_post_vbios(dev); gma_enable_swsci(); } static void gma_generate_ssdt(const struct device *dev) { const struct northbridge_intel_haswell_config *chip = dev->chip_info; drivers_intel_gma_displays_ssdt_generate(&chip->gfx); } static void gma_func0_disable(struct device *dev) { /* Disable VGA decode */ pci_or_config16(pcidev_on_root(0, 0), GGC, 1 << 1); } static struct device_operations gma_func0_ops = { .read_resources = pci_dev_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .init = gma_func0_init, .acpi_fill_ssdt = gma_generate_ssdt, .vga_disable = gma_func0_disable, .ops_pci = &pci_dev_ops_pci, }; static const unsigned short pci_device_ids[] = { 0x0402, /* Desktop GT1 */ 0x0412, /* Desktop GT2 */ 0x041e, /* Desktop GT1.5 */ 0x0422, /* Desktop GT3 */ 0x0d22, /* Desktop GT3e */ 0x0406, /* Mobile GT1 */ 0x0416, /* Mobile GT2 */ 0x0426, /* Mobile GT3 */ 0x040a, /* Server GT1 */ 0x041a, /* Server GT2 */ 0x042a, /* Server GT3 */ 0x0d16, /* Mobile 4+3 GT1 */ 0x0d26, /* Mobile 4+3 GT2, Mobile GT3e */ 0x0d36, /* Mobile 4+3 GT3 */ 0x0a06, /* ULT GT1 */ 0x0a16, /* ULT GT2 */ 0x0a26, /* ULT GT3 */ 0x0a0e, /* ULX GT1 */ 0x0a1e, /* ULX GT2 */ 0, }; static const struct pci_driver pch_lpc __pci_driver = { .ops = &gma_func0_ops, .vendor = PCI_VID_INTEL, .devices = pci_device_ids, };