/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2010 Advanced Micro Devices, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
 */
/* IBV defined Structure */ /* IBV Specific Options */
#ifndef MWLC_D_H
#define MWLC_D_H

#define MAX_TOTAL_DIMMS 8	/* Maximum Number of DIMMs in systems */
				/* (DCT0 + DCT1) */
#define MAX_DIMMS 4		/* Maximum Number of DIMMs on each DCT */
#define MAX_LDIMMS 4		/* Maximum number of Logical DIMMs per DCT */

/*MCT Max variables */
#define MAX_ERRORS 32		/* Maximum number of Errors Reported */
#define MAX_STATUS 32		/* Maximum number of Status variables*/
#define MAX_BYTE_LANES (8+1)	/* Maximum number of Byte Lanes - include ECC */

#define C_MAX_DIMMS 4		/* Maximum Number of DIMMs on each DCT */

/* STATUS Definition */
#define DCT_STATUS_REGISTERED 3	/* Registered DIMMs support */
#define DCT_STATUS_OnDimmMirror 24	/* OnDimmMirror support */

/* PCI Defintions */
#define FUN_HT 0	  /* Funtion 0 Access */
#define FUN_MAP 1	  /* Funtion 1 Access */
#define FUN_DCT 2	  /* Funtion 2 Access */
#define FUN_MISC 3	  /* Funtion 3 Access */
#define FUN_ADD_DCT 0xF	  /* Funtion 2 Additional Register Access */
#define BOTH_DCTS 2	  /* The access is independent of DCTs */
#define PCI_MIN_LOW 0	  /* Lowest possible PCI register location */
#define PCI_MAX_HIGH 31	  /* Highest possible PCI register location */

/*Function 2 */
/* #define DRAM_INIT 0x7C */
#define DRAM_MRS_REGISTER 0x84
#define DRAM_CONFIG_HIGH 0x94
#define DRAM_CONTROLLER_ADD_DATA_OFFSET_REG 0x98
#define DRAM_CONTROLLER_ADD_DATA_PORT_REG 0x9C

/*Function 2 Additional DRAM control registers */
#define DRAM_ADD_DCT_PHY_CONTROL_REG 0x8
#define DRAM_CONT_ADD_DQS_TIMING_CTRL_BL_01 0x30
#define DRAM_CONT_ADD_DQS_TIMING_CTRL_BL_45 0x40
#define DRAM_CONT_ADD_PHASE_REC_CTRL_LOW 0x50
#define DRAM_CONT_ADD_PHASE_REC_CTRL_HIGH 0x51
#define DRAM_CONT_ADD_ECC_PHASE_REC_CTRL 0x52
#define DRAM_CONT_ADD_WRITE_LEV_ERROR_REG 0x53

/* CPU Register defintions */

/* Register Bit Location */
#define DctAccessDone 31
#define DctAccessWrite 30
#define RDqsEn 12
#define TrDimmSelStart 4
#define TrDimmSelEnd 5
#define WrLvTrMode 1
#define TrNibbleSel 2
#define WrLvOdtEn 12
#define WrLvErrStart 0
#define WrLvErrEnd 8
#define SendMrsCmd 26
#define Qoff 12
#define MRS_Level 7
#define MrsAddressStart 0
#define MrsAddressEnd 15
#define MrsBankStart 16
#define MrsBankEnd 18
#define MrsChipSelStart 20
#define MrsChipSelEnd 22
#define ASR 18
#define SRT 19
#define DramTermDynStart 10
#define DramTermDynEnd 11
#define WrtLvTrMode 1
#define TrNibbleSel 2
#define TrDimmSelStart 4
#define TrDimmSelEnd 5
#define WrtLvTrEn 0
#define DrvImpCtrlStart 2
#define DrvImpCtrlEnd 3
#define DramTermNbStart 7
#define DramTermNbEnd 9
#define onDimmMirror 3

typedef struct _sMCTStruct
{
	u8 PlatMaxTotalDimms;			/* IBV defined total number of DIMMs */
						/* on a particular node */
	u8 PlatMaxDimmsDct;			/* IBV defined maximum number of */
						/* DIMMs on a DCT */
	void (*AgesaDelay)(u32 delayval);	/* IBV defined Delay Function */
} sMCTStruct;

/* DCT 0 and DCT 1 Data structure */
typedef struct _sDCTStruct
{
	u8 NodeId;			/* Node ID */
	u8 DctTrain;			/* Current DCT being trained */
	u8 CurrDct;			/* Current DCT number (0 or 1) */
	u8 DctCSPresent;		/* Current DCT CS mapping */
	u8 WLGrossDelay[MAX_BYTE_LANES*MAX_LDIMMS];	/* Write Levelization Gross Delay */
							/* per byte Lane Per Logical DIMM*/
	u8 WLFineDelay[MAX_BYTE_LANES*MAX_LDIMMS];	/* Write Levelization Fine Delay */
							/* per byte Lane Per Logical DIMM*/
	u16 RegMan1Present;
	u8 DimmPresent[MAX_TOTAL_DIMMS];/* Indicates which DIMMs are present */
					/* from Total Number of DIMMs(per Node)*/
	u8 DimmX8Present[MAX_TOTAL_DIMMS];	/* Which DIMMs x8 devices */
	u8 Status[MAX_STATUS];		/* Status for DCT0 and 1 */
	u8 ErrCode[MAX_ERRORS];		/* Major Error codes for DCT0 and 1 */
	u8 ErrStatus[MAX_ERRORS];	/* Minor Error codes for DCT0 and 1 */
	u8 DimmValid[MAX_TOTAL_DIMMS];	/* Indicates which DIMMs are valid for */
					/* Total Number of DIMMs(per Node) */
	u8 WLTotalDelay[MAX_BYTE_LANES];/* Write Levelization Toral Delay */
					/* per byte lane */
	u8 MaxDimmsInstalled;		/* Max Dimms Installed for current DCT */
	u8 DimmRanks[MAX_TOTAL_DIMMS];	/* Total Number of Ranks(per Dimm) */
	u32 LogicalCPUID;
	u8 WLPass;
} sDCTStruct;

#endif