/* * This file is part of the coreboot project. * * Copyright (C) 2015 Timothy Pearson , Raptor Engineering * Copyright (C) 2007 Advanced Micro Devices, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if CONFIG_LOGICAL_CPUS #include #include #endif #include "northbridge.h" #include "amdfam10.h" #include "ht_config.h" #include "chip.h" #if CONFIG_HW_MEM_HOLE_SIZEK != 0 #include #endif #if CONFIG_AMD_SB_CIMX #include #endif struct amdfam10_sysconf_t sysconf; #define FX_DEVS NODE_NUMS static device_t __f0_dev[FX_DEVS]; device_t __f1_dev[FX_DEVS]; static device_t __f2_dev[FX_DEVS]; static device_t __f4_dev[FX_DEVS]; static unsigned fx_devs=0; device_t get_node_pci(u32 nodeid, u32 fn) { #if NODE_NUMS + CONFIG_CDB >= 32 if((CONFIG_CDB + nodeid) < 32) { return dev_find_slot(CONFIG_CBB, PCI_DEVFN(CONFIG_CDB + nodeid, fn)); } else { return dev_find_slot(CONFIG_CBB-1, PCI_DEVFN(CONFIG_CDB + nodeid - 32, fn)); } #else return dev_find_slot(CONFIG_CBB, PCI_DEVFN(CONFIG_CDB + nodeid, fn)); #endif } static void get_fx_devs(void) { int i; for(i = 0; i < FX_DEVS; i++) { __f0_dev[i] = get_node_pci(i, 0); __f1_dev[i] = get_node_pci(i, 1); __f2_dev[i] = get_node_pci(i, 2); __f4_dev[i] = get_node_pci(i, 4); if (__f0_dev[i] != NULL && __f1_dev[i] != NULL) fx_devs = i+1; } if (__f1_dev[0] == NULL || __f0_dev[0] == NULL || fx_devs == 0) { die("Cannot find 0:0x18.[0|1]\n"); } } static u32 f1_read_config32(unsigned reg) { if (fx_devs == 0) get_fx_devs(); return pci_read_config32(__f1_dev[0], reg); } static void f1_write_config32(unsigned reg, u32 value) { int i; if (fx_devs == 0) get_fx_devs(); for(i = 0; i < fx_devs; i++) { device_t dev; dev = __f1_dev[i]; if (dev && dev->enabled) { pci_write_config32(dev, reg, value); } } } static u32 amdfam10_nodeid(device_t dev) { #if NODE_NUMS == 64 unsigned busn; busn = dev->bus->secondary; if(busn != CONFIG_CBB) { return (dev->path.pci.devfn >> 3) - CONFIG_CDB + 32; } else { return (dev->path.pci.devfn >> 3) - CONFIG_CDB; } #else return (dev->path.pci.devfn >> 3) - CONFIG_CDB; #endif } static void set_vga_enable_reg(u32 nodeid, u32 linkn) { u32 val; val = 1 | (nodeid<<4) | (linkn<<12); /* it will routing (1)mmio 0xa0000:0xbffff (2) io 0x3b0:0x3bb, 0x3c0:0x3df */ f1_write_config32(0xf4, val); } static bool is_non_coherent_link(struct device *dev, struct bus *link) { u32 link_type; do { link_type = pci_read_config32(dev, link->cap + 0x18); } while (link_type & ConnectionPending); if (!(link_type & LinkConnected)) return false; do { link_type = pci_read_config32(dev, link->cap + 0x18); } while (!(link_type & InitComplete)); return !!(link_type & NonCoherent); } static u32 amdfam10_scan_chain(device_t dev, u32 nodeid, struct bus *link, bool is_sblink, u32 max) { // I want to put sb chain in bus 0 can I? int i; unsigned int next_unitid; u32 ht_c_index; u32 ht_unitid_base[4]; // here assume only 4 HT device on chain u32 max_bus; u32 min_bus; u32 busses; #if CONFIG_SB_HT_CHAIN_ON_BUS0 > 1 u32 busn = max&0xff; #endif u32 max_devfn; if (link->link_num > 3) { u32 regpos; u32 reg; regpos = 0x170 + 4 * (link->link_num & 3); // it is only on sublink0 reg = pci_read_config32(dev, regpos); if(reg & 1) return max; // already ganged no sblink1 dev = get_node_pci(nodeid, 4); } /* Check for connected link. */ link->cap = 0x80 + ((link->link_num & 3) * 0x20); if (!is_non_coherent_link(dev, link)) return max; /* See if there is an available configuration space mapping * register in function 1. */ ht_c_index = get_ht_c_index(nodeid, link->link_num, &sysconf); if(ht_c_index>=4) return max; /* Set up the primary, secondary and subordinate bus numbers. * We have no idea how many busses are behind this bridge yet, * so we set the subordinate bus number to 0xff for the moment. */ #if CONFIG_SB_HT_CHAIN_ON_BUS0 > 0 // first chain will on bus 0 if (is_sblink) { // actually max is 0 here min_bus = max; } #if CONFIG_SB_HT_CHAIN_ON_BUS0 > 1 // second chain will be on 0x40, third 0x80, forth 0xc0 // i would refined that to 2, 3, 4 ==> 0, 0x, 40, 0x80, 0xc0 // >4 will use more segments, We can have 16 segmment and every segment have 256 bus, For that case need the kernel support mmio pci config. else { min_bus = ((busn>>3) + 1) << 3; // one node can have 8 link and segn is the same } max = min_bus; #else //other ... else { min_bus = ++max; } #endif #else min_bus = ++max; #endif max_bus = 0xfc; link->secondary = min_bus; link->subordinate = link->secondary; /* Read the existing primary/secondary/subordinate bus * number configuration. */ busses = pci_read_config32(dev, link->cap + 0x14); /* Configure the bus numbers for this bridge: the configuration * transactions will not be propagates by the bridge if it is * not correctly configured */ busses &= 0xffff00ff; busses |= ((u32)(link->secondary) << 8); pci_write_config32(dev, link->cap + 0x14, busses); /* set the config map space */ set_config_map_reg(nodeid, link->link_num, ht_c_index, link->secondary, max_bus, sysconf.segbit, sysconf.nodes); /* Now we can scan all of the subordinate busses i.e. the * chain on the hypertranport link */ for(i=0;i<4;i++) { ht_unitid_base[i] = 0x20; } //if ext conf is enabled, only need use 0x1f if (min_bus == 0) max_devfn = (0x17<<3) | 7; else max_devfn = (0x1f<<3) | 7; next_unitid = hypertransport_scan_chain(link, 0, max_devfn, ht_unitid_base, offset_unit_id(is_sblink)); /* Now that nothing is overlapping it is safe to scan the children. */ pci_scan_bus(link, 0x00, ((next_unitid - 1) << 3) | 7); /* We know the number of busses behind this bridge. Set the * subordinate bus number to it's real value */ set_config_map_reg(nodeid, link->link_num, ht_c_index, link->secondary, link->subordinate, sysconf.segbit, sysconf.nodes); sysconf.ht_c_num++; { // use ht_unitid_base to update hcdn_reg u32 temp = 0; for(i=0;i<4;i++) { temp |= (ht_unitid_base[i] & 0xff) << (i*8); } sysconf.hcdn_reg[ht_c_index] = temp; } store_ht_c_conf_bus(nodeid, link->link_num, ht_c_index, link->secondary, link->subordinate, &sysconf); return link->subordinate; } static unsigned amdfam10_scan_chains(device_t dev, unsigned unused) { unsigned nodeid; struct bus *link; unsigned sblink = sysconf.sblk; unsigned int max = dev->bus->subordinate; nodeid = amdfam10_nodeid(dev); /* Do sb ht chain at first, in case s2885 put sb chain (8131/8111) on link2, but put 8151 on link0 */ for (link = dev->link_list; link; link = link->next) { bool is_sblink = (nodeid == 0) && (link->link_num == sblink); if ((CONFIG_SB_HT_CHAIN_ON_BUS0 > 0) && is_sblink) max = amdfam10_scan_chain(dev, nodeid, link, is_sblink, max); } for (link = dev->link_list; link; link = link->next) { bool is_sblink = (nodeid == 0) && (link->link_num == sblink); if ((CONFIG_SB_HT_CHAIN_ON_BUS0 > 0) && is_sblink) continue; max = amdfam10_scan_chain(dev, nodeid, link, is_sblink, max); } dev->bus->subordinate = max; return unused; } static int reg_useable(unsigned reg, device_t goal_dev, unsigned goal_nodeid, unsigned goal_link) { struct resource *res; unsigned nodeid, link = 0; int result; res = 0; for(nodeid = 0; !res && (nodeid < fx_devs); nodeid++) { device_t dev; dev = __f0_dev[nodeid]; if (!dev) continue; for(link = 0; !res && (link < 8); link++) { res = probe_resource(dev, IOINDEX(0x1000 + reg, link)); } } result = 2; if (res) { result = 0; if ( (goal_link == (link - 1)) && (goal_nodeid == (nodeid - 1)) && (res->flags <= 1)) { result = 1; } } return result; } static struct resource *amdfam10_find_iopair(device_t dev, unsigned nodeid, unsigned link) { struct resource *resource; u32 free_reg, reg; resource = 0; free_reg = 0; for(reg = 0xc0; reg <= 0xd8; reg += 0x8) { int result; result = reg_useable(reg, dev, nodeid, link); if (result == 1) { /* I have been allocated this one */ break; } else if (result > 1) { /* I have a free register pair */ free_reg = reg; } } if (reg > 0xd8) { reg = free_reg; // if no free, the free_reg still be 0 } //Ext conf space if(!reg) { //because of Extend conf space, we will never run out of reg, but we need one index to differ them. so same node and same link can have multi range u32 index = get_io_addr_index(nodeid, link); reg = 0x110+ (index<<24) + (4<<20); // index could be 0, 255 } resource = new_resource(dev, IOINDEX(0x1000 + reg, link)); return resource; } static struct resource *amdfam10_find_mempair(device_t dev, u32 nodeid, u32 link) { struct resource *resource; u32 free_reg, reg; resource = 0; free_reg = 0; for(reg = 0x80; reg <= 0xb8; reg += 0x8) { int result; result = reg_useable(reg, dev, nodeid, link); if (result == 1) { /* I have been allocated this one */ break; } else if (result > 1) { /* I have a free register pair */ free_reg = reg; } } if (reg > 0xb8) { reg = free_reg; } //Ext conf space if(!reg) { //because of Extend conf space, we will never run out of reg, // but we need one index to differ them. so same node and // same link can have multi range u32 index = get_mmio_addr_index(nodeid, link); reg = 0x110+ (index<<24) + (6<<20); // index could be 0, 63 } resource = new_resource(dev, IOINDEX(0x1000 + reg, link)); return resource; } static void amdfam10_link_read_bases(device_t dev, u32 nodeid, u32 link) { struct resource *resource; /* Initialize the io space constraints on the current bus */ resource = amdfam10_find_iopair(dev, nodeid, link); if (resource) { u32 align; align = log2(HT_IO_HOST_ALIGN); resource->base = 0; resource->size = 0; resource->align = align; resource->gran = align; resource->limit = 0xffffUL; resource->flags = IORESOURCE_IO | IORESOURCE_BRIDGE; } /* Initialize the prefetchable memory constraints on the current bus */ resource = amdfam10_find_mempair(dev, nodeid, link); if (resource) { resource->base = 0; resource->size = 0; resource->align = log2(HT_MEM_HOST_ALIGN); resource->gran = log2(HT_MEM_HOST_ALIGN); resource->limit = 0xffffffffffULL; resource->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; resource->flags |= IORESOURCE_BRIDGE; } /* Initialize the memory constraints on the current bus */ resource = amdfam10_find_mempair(dev, nodeid, link); if (resource) { resource->base = 0; resource->size = 0; resource->align = log2(HT_MEM_HOST_ALIGN); resource->gran = log2(HT_MEM_HOST_ALIGN); resource->limit = 0xffffffffffULL; resource->flags = IORESOURCE_MEM | IORESOURCE_BRIDGE; } } static void amdfam10_read_resources(device_t dev) { u32 nodeid; struct bus *link; nodeid = amdfam10_nodeid(dev); for(link = dev->link_list; link; link = link->next) { if (link->children) { amdfam10_link_read_bases(dev, nodeid, link->link_num); } } } static void amdfam10_set_resource(device_t dev, struct resource *resource, u32 nodeid) { resource_t rbase, rend; unsigned reg, link_num; char buf[50]; /* Make certain the resource has actually been set */ if (!(resource->flags & IORESOURCE_ASSIGNED)) { return; } /* If I have already stored this resource don't worry about it */ if (resource->flags & IORESOURCE_STORED) { return; } /* Only handle PCI memory and IO resources */ if (!(resource->flags & (IORESOURCE_MEM | IORESOURCE_IO))) return; /* Ensure I am actually looking at a resource of function 1 */ if ((resource->index & 0xffff) < 0x1000) { return; } /* Get the base address */ rbase = resource->base; /* Get the limit (rounded up) */ rend = resource_end(resource); /* Get the register and link */ reg = resource->index & 0xfff; // 4k link_num = IOINDEX_LINK(resource->index); if (resource->flags & IORESOURCE_IO) { set_io_addr_reg(dev, nodeid, link_num, reg, rbase>>8, rend>>8); store_conf_io_addr(nodeid, link_num, reg, (resource->index >> 24), rbase>>8, rend>>8); } else if (resource->flags & IORESOURCE_MEM) { set_mmio_addr_reg(nodeid, link_num, reg, (resource->index >>24), rbase>>8, rend>>8, sysconf.nodes) ;// [39:8] store_conf_mmio_addr(nodeid, link_num, reg, (resource->index >>24), rbase>>8, rend>>8); } resource->flags |= IORESOURCE_STORED; snprintf(buf, sizeof (buf), " ", nodeid, link_num); report_resource_stored(dev, resource, buf); } /** * I tried to reuse the resource allocation code in amdfam10_set_resource() * but it is too difficult to deal with the resource allocation magic. */ static void amdfam10_create_vga_resource(device_t dev, unsigned nodeid) { struct bus *link; /* find out which link the VGA card is connected, * we only deal with the 'first' vga card */ for (link = dev->link_list; link; link = link->next) { if (link->bridge_ctrl & PCI_BRIDGE_CTL_VGA) { #if CONFIG_MULTIPLE_VGA_ADAPTERS extern device_t vga_pri; // the primary vga device, defined in device.c printk(BIOS_DEBUG, "VGA: vga_pri bus num = %d bus range [%d,%d]\n", vga_pri->bus->secondary, link->secondary,link->subordinate); /* We need to make sure the vga_pri is under the link */ if((vga_pri->bus->secondary >= link->secondary ) && (vga_pri->bus->secondary <= link->subordinate ) ) #endif break; } } /* no VGA card installed */ if (link == NULL) return; printk(BIOS_DEBUG, "VGA: %s (aka node %d) link %d has VGA device\n", dev_path(dev), nodeid, link->link_num); set_vga_enable_reg(nodeid, link->link_num); } static void amdfam10_set_resources(device_t dev) { unsigned nodeid; struct bus *bus; struct resource *res; /* Find the nodeid */ nodeid = amdfam10_nodeid(dev); amdfam10_create_vga_resource(dev, nodeid); /* Set each resource we have found */ for(res = dev->resource_list; res; res = res->next) { amdfam10_set_resource(dev, res, nodeid); } for(bus = dev->link_list; bus; bus = bus->next) { if (bus->children) { assign_resources(bus); } } } static void mcf0_control_init(struct device *dev) { } static struct device_operations northbridge_operations = { .read_resources = amdfam10_read_resources, .set_resources = amdfam10_set_resources, .enable_resources = pci_dev_enable_resources, .init = mcf0_control_init, .scan_bus = amdfam10_scan_chains, #if IS_ENABLED(CONFIG_HAVE_ACPI_TABLES) .write_acpi_tables = northbridge_write_acpi_tables, .acpi_fill_ssdt_generator = northbridge_acpi_write_vars, #endif .enable = 0, .ops_pci = 0, }; static const struct pci_driver mcf0_driver __pci_driver = { .ops = &northbridge_operations, .vendor = PCI_VENDOR_ID_AMD, .device = 0x1200, }; struct chip_operations northbridge_amd_amdfam10_ops = { CHIP_NAME("AMD FAM10 Northbridge") .enable_dev = 0, }; static void amdfam10_domain_read_resources(device_t dev) { unsigned reg; /* Find the already assigned resource pairs */ get_fx_devs(); for(reg = 0x80; reg <= 0xd8; reg+= 0x08) { u32 base, limit; base = f1_read_config32(reg); limit = f1_read_config32(reg + 0x04); /* Is this register allocated? */ if ((base & 3) != 0) { unsigned nodeid, reg_link; device_t reg_dev; if(reg<0xc0) { // mmio nodeid = (limit & 0xf) + (base&0x30); } else { // io nodeid = (limit & 0xf) + ((base>>4)&0x30); } reg_link = (limit >> 4) & 7; reg_dev = __f0_dev[nodeid]; if (reg_dev) { /* Reserve the resource */ struct resource *res; res = new_resource(reg_dev, IOINDEX(0x1000 + reg, reg_link)); if (res) { res->flags = 1; } } } } /* FIXME: do we need to check extend conf space? I don't believe that much preset value */ #if !CONFIG_PCI_64BIT_PREF_MEM pci_domain_read_resources(dev); #else struct bus *link; struct resource *resource; for(link=dev->link_list; link; link = link->next) { /* Initialize the system wide io space constraints */ resource = new_resource(dev, 0|(link->link_num<<2)); resource->base = 0x400; resource->limit = 0xffffUL; resource->flags = IORESOURCE_IO; /* Initialize the system wide prefetchable memory resources constraints */ resource = new_resource(dev, 1|(link->link_num<<2)); resource->limit = 0xfcffffffffULL; resource->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; /* Initialize the system wide memory resources constraints */ resource = new_resource(dev, 2|(link->link_num<<2)); resource->limit = 0xfcffffffffULL; resource->flags = IORESOURCE_MEM; } #endif #if CONFIG_MMCONF_SUPPORT struct resource *res = new_resource(dev, 0xc0010058); res->base = CONFIG_MMCONF_BASE_ADDRESS; res->size = CONFIG_MMCONF_BUS_NUMBER * 4096*256; res->flags = IORESOURCE_MEM | IORESOURCE_RESERVE | IORESOURCE_FIXED | IORESOURCE_STORED | IORESOURCE_ASSIGNED; /* Reserve lower DRAM region to force PCI MMIO region to correct location above 0xefffffff */ ram_resource(dev, 7, 0, rdmsr(TOP_MEM).lo >> 10); #endif } static u32 my_find_pci_tolm(struct bus *bus, u32 tolm) { struct resource *min; min = 0; search_bus_resources(bus, IORESOURCE_MEM, IORESOURCE_MEM, tolm_test, &min); if (min && tolm > min->base) { tolm = min->base; } return tolm; } #if CONFIG_HW_MEM_HOLE_SIZEK != 0 struct hw_mem_hole_info { unsigned hole_startk; int node_id; }; static struct hw_mem_hole_info get_hw_mem_hole_info(void) { struct hw_mem_hole_info mem_hole; int i; mem_hole.hole_startk = CONFIG_HW_MEM_HOLE_SIZEK; mem_hole.node_id = -1; for (i = 0; i < sysconf.nodes; i++) { struct dram_base_mask_t d; u32 hole; d = get_dram_base_mask(i); if(!(d.mask & 1)) continue; // no memory on this node hole = pci_read_config32(__f1_dev[i], 0xf0); if(hole & 1) { // we find the hole mem_hole.hole_startk = (hole & (0xff<<24)) >> 10; mem_hole.node_id = i; // record the node No with hole break; // only one hole } } /* We need to double check if there is special set on base reg and limit reg * are not continuous instead of hole, it will find out its hole_startk. */ if(mem_hole.node_id==-1) { resource_t limitk_pri = 0; for(i=0; i 4 *1024 * 1024) break; // don't need to go to check if(limitk_pri != base_k) { // we find the hole mem_hole.hole_startk = (unsigned)limitk_pri; // must beblow 4G mem_hole.node_id = i; break; //only one hole } limit_k = ((resource_t)((d.mask + 0x00000100) & 0x1fffff00)) << 9; limitk_pri = limit_k; } } return mem_hole; } #endif #include static void setup_uma_memory(void) { #if CONFIG_GFXUMA uint32_t topmem = (uint32_t) bsp_topmem(); uma_memory_size = get_uma_memory_size(topmem); uma_memory_base = topmem - uma_memory_size; /* TOP_MEM1 */ printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n", __func__, uma_memory_size, uma_memory_base); #endif } static void amdfam10_domain_set_resources(device_t dev) { #if CONFIG_PCI_64BIT_PREF_MEM struct resource *mem1, *mem2; struct resource *res; #endif unsigned long mmio_basek; u32 pci_tolm; int i, idx; struct bus *link; #if CONFIG_HW_MEM_HOLE_SIZEK != 0 struct hw_mem_hole_info mem_hole; u32 reset_memhole = 1; #endif #if CONFIG_PCI_64BIT_PREF_MEM for(link = dev->link_list; link; link = link->next) { /* Now reallocate the pci resources memory with the * highest addresses I can manage. */ mem1 = find_resource(dev, 1|(link->link_num<<2)); mem2 = find_resource(dev, 2|(link->link_num<<2)); printk(BIOS_DEBUG, "base1: 0x%08Lx limit1: 0x%08Lx size: 0x%08Lx align: %d\n", mem1->base, mem1->limit, mem1->size, mem1->align); printk(BIOS_DEBUG, "base2: 0x%08Lx limit2: 0x%08Lx size: 0x%08Lx align: %d\n", mem2->base, mem2->limit, mem2->size, mem2->align); /* See if both resources have roughly the same limits */ if (((mem1->limit <= 0xffffffff) && (mem2->limit <= 0xffffffff)) || ((mem1->limit > 0xffffffff) && (mem2->limit > 0xffffffff))) { /* If so place the one with the most stringent alignment first */ if (mem2->align > mem1->align) { struct resource *tmp; tmp = mem1; mem1 = mem2; mem2 = tmp; } /* Now place the memory as high up as it will go */ mem2->base = resource_max(mem2); mem1->limit = mem2->base - 1; mem1->base = resource_max(mem1); } else { /* Place the resources as high up as they will go */ mem2->base = resource_max(mem2); mem1->base = resource_max(mem1); } printk(BIOS_DEBUG, "base1: 0x%08Lx limit1: 0x%08Lx size: 0x%08Lx align: %d\n", mem1->base, mem1->limit, mem1->size, mem1->align); printk(BIOS_DEBUG, "base2: 0x%08Lx limit2: 0x%08Lx size: 0x%08Lx align: %d\n", mem2->base, mem2->limit, mem2->size, mem2->align); } for(res = dev->resource_list; res; res = res->next) { res->flags |= IORESOURCE_ASSIGNED; res->flags |= IORESOURCE_STORED; report_resource_stored(dev, res, ""); } #endif pci_tolm = 0xffffffffUL; for(link = dev->link_list; link; link = link->next) { pci_tolm = my_find_pci_tolm(link, pci_tolm); } // FIXME handle interleaved nodes. If you fix this here, please fix // amdk8, too. mmio_basek = pci_tolm >> 10; /* Round mmio_basek to something the processor can support */ mmio_basek &= ~((1 << 6) -1); // FIXME improve mtrr.c so we don't use up all of the mtrrs with a 64M // MMIO hole. If you fix this here, please fix amdk8, too. /* Round the mmio hole to 64M */ mmio_basek &= ~((64*1024) - 1); #if CONFIG_HW_MEM_HOLE_SIZEK != 0 /* if the hw mem hole is already set in raminit stage, here we will compare * mmio_basek and hole_basek. if mmio_basek is bigger that hole_basek and will * use hole_basek as mmio_basek and we don't need to reset hole. * otherwise We reset the hole to the mmio_basek */ mem_hole = get_hw_mem_hole_info(); // Use hole_basek as mmio_basek, and we don't need to reset hole anymore if ((mem_hole.node_id != -1) && (mmio_basek > mem_hole.hole_startk)) { mmio_basek = mem_hole.hole_startk; reset_memhole = 0; } #endif idx = 0x10; for(i = 0; i < sysconf.nodes; i++) { struct dram_base_mask_t d; resource_t basek, limitk, sizek; // 4 1T d = get_dram_base_mask(i); if(!(d.mask & 1)) continue; basek = ((resource_t)(d.base & 0x1fffff00)) << 9; // could overflow, we may lost 6 bit here limitk = ((resource_t)((d.mask + 0x00000100) & 0x1fffff00)) << 9 ; sizek = limitk - basek; /* see if we need a hole from 0xa0000 to 0xbffff */ if ((basek < ((8*64)+(8*16))) && (sizek > ((8*64)+(16*16)))) { ram_resource(dev, (idx | i), basek, ((8*64)+(8*16)) - basek); idx += 0x10; basek = (8*64)+(16*16); sizek = limitk - ((8*64)+(16*16)); } // printk(BIOS_DEBUG, "node %d : mmio_basek=%08x, basek=%08x, limitk=%08x\n", i, mmio_basek, basek, limitk); /* split the region to accommodate pci memory space */ if ( (basek < 4*1024*1024 ) && (limitk > mmio_basek) ) { if (basek <= mmio_basek) { unsigned pre_sizek; pre_sizek = mmio_basek - basek; if(pre_sizek>0) { ram_resource(dev, (idx | i), basek, pre_sizek); idx += 0x10; sizek -= pre_sizek; } basek = mmio_basek; } if ((basek + sizek) <= 4*1024*1024) { sizek = 0; } else { basek = 4*1024*1024; sizek -= (4*1024*1024 - mmio_basek); } } ram_resource(dev, (idx | i), basek, sizek); idx += 0x10; printk(BIOS_DEBUG, "%d: mmio_basek=%08lx, basek=%08llx, limitk=%08llx\n", i, mmio_basek, basek, limitk); } #if CONFIG_GFXUMA uma_resource(dev, 7, uma_memory_base >> 10, uma_memory_size >> 10); #endif for(link = dev->link_list; link; link = link->next) { if (link->children) { assign_resources(link); } } } static u32 amdfam10_domain_scan_bus(device_t dev, u32 unused) { u32 reg; int i; struct bus *link; /* Unmap all of the HT chains */ for(reg = 0xe0; reg <= 0xec; reg += 4) { f1_write_config32(reg, 0); } for(link = dev->link_list; link; link = link->next) { link->secondary = dev->bus->subordinate; pci_scan_bus(link, PCI_DEVFN(CONFIG_CDB, 0), 0xff); dev->bus->subordinate = link->subordinate; } /* Tune the hypertransport transaction for best performance. * Including enabling relaxed ordering if it is safe. */ get_fx_devs(); for(i = 0; i < fx_devs; i++) { device_t f0_dev; f0_dev = __f0_dev[i]; if (f0_dev && f0_dev->enabled) { u32 httc; httc = pci_read_config32(f0_dev, HT_TRANSACTION_CONTROL); httc &= ~HTTC_RSP_PASS_PW; if (!dev->link_list->disable_relaxed_ordering) { httc |= HTTC_RSP_PASS_PW; } printk(BIOS_SPEW, "%s passpw: %s\n", dev_path(dev), (!dev->link_list->disable_relaxed_ordering)? "enabled":"disabled"); pci_write_config32(f0_dev, HT_TRANSACTION_CONTROL, httc); } } return unused; } #if IS_ENABLED(CONFIG_GENERATE_SMBIOS_TABLES) static int amdfam10_get_smbios_data16(int* count, int handle, unsigned long *current) { struct amdmct_memory_info *mem_info; mem_info = cbmem_find(CBMEM_ID_AMDMCT_MEMINFO); if (mem_info == NULL) return 0; /* can't find amdmct information in cbmem */ struct device *dev = get_node_pci(0, 0); struct northbridge_amd_amdfam10_config *config = dev->chip_info; int node; int slot; struct smbios_type16 *t = (struct smbios_type16 *)*current; int len = sizeof(struct smbios_type16); memset(t, 0, sizeof(struct smbios_type16)); t->type = SMBIOS_PHYS_MEMORY_ARRAY; t->handle = handle; t->length = len - 2; t->location = MEMORY_ARRAY_LOCATION_SYSTEM_BOARD; t->use = MEMORY_ARRAY_USE_SYSTEM; t->memory_error_correction = MEMORY_ARRAY_ECC_NONE; if ((mem_info->ecc_enabled) && (mem_info->mct_stat.GStatus & (1 << GSB_ECCDIMMs)) && !(mem_info->mct_stat.GStatus & (1 << GSB_DramECCDis))) /* Single-bit ECC enabled */ t->memory_error_correction = MEMORY_ARRAY_ECC_SINGLE_BIT; t->maximum_capacity = config->maximum_memory_capacity / 1024; /* Convert to kilobytes */ t->memory_error_information_handle = 0xFFFE; /* no error information handle available */ t->number_of_memory_devices = 0; /* Check all nodes for installed DIMMs */ for (node = 0; node < MAX_NODES_SUPPORTED; node++) /* Check all slots for installed DIMMs */ for (slot = 0; slot < MAX_DIMMS_SUPPORTED; slot++) if (mem_info->dct_stat[node].DIMMPresent & (1 << slot)) /* Found an installed DIMM; increment count */ t->number_of_memory_devices++; *current += len; *count += 1; return len; } static uint16_t amdmct_mct_speed_enum_to_mhz(uint8_t speed) { switch (speed) { case 1: return 200; case 2: return 266; case 3: return 333; case 4: return 400; case 5: return 533; default: return 0; } } static int amdfam10_get_smbios_data17(int* count, int handle, int parent_handle, unsigned long *current) { struct amdmct_memory_info *mem_info; mem_info = cbmem_find(CBMEM_ID_AMDMCT_MEMINFO); if (mem_info == NULL) return 0; /* can't find amdmct information in cbmem */ int single_len; int len = 0; int node; int slot; /* Check all nodes for installed DIMMs */ for (node = 0; node < MAX_NODES_SUPPORTED; node++) { /* Get configured RAM bus speed */ uint16_t speed; speed = amdmct_mct_speed_enum_to_mhz(mem_info->dct_stat[node].Speed); /* Get maximum RAM bus speed */ uint16_t max_speed; max_speed = amdmct_mct_speed_enum_to_mhz(mem_info->dct_stat[node].DIMMAutoSpeed); /* Check all slots for installed DIMMs */ for (slot = 0; slot < MAX_DIMMS_SUPPORTED; slot++) { if (mem_info->dct_stat[node].DIMMPresent & (1 << slot)) { /* Found an installed DIMM; populate tables */ struct smbios_type17 *t = (struct smbios_type17 *)*current; char string_buffer[256]; /* Initialize structure */ memset(t, 0, sizeof(struct smbios_type17)); /* Calculate the total module size in bytes: * Primary data width * 2^(#rows) * 2^(#cols) * #banks * #ranks */ uint8_t width, rows, cols, banks, ranks; width = 8; rows = mem_info->dct_stat[node].DimmRows[slot]; cols = mem_info->dct_stat[node].DimmCols[slot]; ranks = mem_info->dct_stat[node].DimmRanks[slot]; banks = mem_info->dct_stat[node].DimmBanks[slot]; uint64_t dimm_size_bytes = width * (1ULL << rows) * (1ULL << cols) * banks * ranks; memset(t, 0, sizeof(struct smbios_type17)); t->type = SMBIOS_MEMORY_DEVICE; t->handle = handle; t->phys_memory_array_handle = parent_handle; t->length = sizeof(struct smbios_type17) - 2; if (dimm_size_bytes > 0x800000000) { t->size = 0x7FFF; t->extended_size = dimm_size_bytes; } else { t->size = dimm_size_bytes / (1024*1024); t->size &= (~0x8000); /* size specified in megabytes */ } t->total_width = t->data_width = 64; if (mem_info->dct_stat[node].DimmECCPresent & (1 << slot)) t->total_width += 8; t->attributes = 0; t->attributes |= ranks & 0xf; /* rank number is stored in the lowest 4 bits of the attributes field */ t->form_factor = MEMORY_FORMFACTOR_DIMM; snprintf(string_buffer, sizeof (string_buffer), "NODE %d DIMM_%s%d", node, (slot & 0x1)?"B":"A", (slot >> 1) + 1); t->device_locator = smbios_add_string(t->eos, string_buffer); if (IS_ENABLED(CONFIG_DIMM_DDR2)) t->memory_type = MEMORY_TYPE_DDR2; else if (IS_ENABLED(CONFIG_DIMM_DDR3)) t->memory_type = MEMORY_TYPE_DDR3; t->type_detail = MEMORY_TYPE_DETAIL_SYNCHRONOUS; if (mem_info->dct_stat[node].DimmRegistered[slot]) t->type_detail |= MEMORY_TYPE_DETAIL_REGISTERED; else t->type_detail |= MEMORY_TYPE_DETAIL_UNBUFFERED; t->speed = max_speed; t->clock_speed = speed; smbios_fill_dimm_manufacturer_from_id(mem_info->dct_stat[node].DimmManufacturerID[slot], t); t->part_number = smbios_add_string(t->eos, mem_info->dct_stat[node].DimmPartNumber[slot]); if (mem_info->dct_stat[node].DimmSerialNumber[slot] == 0) { t->serial_number = smbios_add_string(t->eos, "None"); } else { snprintf(string_buffer, sizeof (string_buffer), "%08X", mem_info->dct_stat[node].DimmSerialNumber[slot]); t->serial_number = smbios_add_string(t->eos, string_buffer); } t->memory_error_information_handle = 0xFFFE; /* no error information handle available */ single_len = t->length + smbios_string_table_len(t->eos); len += single_len; *current += single_len; handle++; *count += 1; } } } return len; } static int amdfam10_get_smbios_data(device_t dev, int *handle, unsigned long *current) { int len; int count = 0; len = amdfam10_get_smbios_data16(&count, *handle, current); len += amdfam10_get_smbios_data17(&count, *handle + 1, *handle, current); *handle += count; return len; } #endif static struct device_operations pci_domain_ops = { .read_resources = amdfam10_domain_read_resources, .set_resources = amdfam10_domain_set_resources, .enable_resources = NULL, .init = NULL, .scan_bus = amdfam10_domain_scan_bus, .ops_pci_bus = pci_bus_default_ops, #if CONFIG_GENERATE_SMBIOS_TABLES .get_smbios_data = amdfam10_get_smbios_data, #endif }; static void sysconf_init(device_t dev) // first node { sysconf.sblk = (pci_read_config32(dev, 0x64)>>8) & 7; // don't forget sublink1 sysconf.segbit = 0; sysconf.ht_c_num = 0; unsigned ht_c_index; for(ht_c_index=0; ht_c_index<32; ht_c_index++) { sysconf.ht_c_conf_bus[ht_c_index] = 0; } sysconf.nodes = ((pci_read_config32(dev, 0x60)>>4) & 7) + 1; #if CONFIG_MAX_PHYSICAL_CPUS > 8 sysconf.nodes += (((pci_read_config32(dev, 0x160)>>4) & 7)<<3); #endif sysconf.enabled_apic_ext_id = 0; sysconf.lift_bsp_apicid = 0; /* Find the bootstrap processors apicid */ sysconf.bsp_apicid = lapicid(); sysconf.apicid_offset = sysconf.bsp_apicid; #if CONFIG_ENABLE_APIC_EXT_ID if (pci_read_config32(dev, 0x68) & (HTTC_APIC_EXT_ID|HTTC_APIC_EXT_BRD_CST)) { sysconf.enabled_apic_ext_id = 1; } #if (CONFIG_APIC_ID_OFFSET>0) if(sysconf.enabled_apic_ext_id) { if(sysconf.bsp_apicid == 0) { /* bsp apic id is not changed */ sysconf.apicid_offset = CONFIG_APIC_ID_OFFSET; } else { sysconf.lift_bsp_apicid = 1; } } #endif #endif } static void add_more_links(device_t dev, unsigned total_links) { struct bus *link, *last = NULL; int link_num; for (link = dev->link_list; link; link = link->next) last = link; if (last) { int links = total_links - last->link_num; link_num = last->link_num; if (links > 0) { link = malloc(links*sizeof(*link)); if (!link) die("Couldn't allocate more links!\n"); memset(link, 0, links*sizeof(*link)); last->next = link; } } else { link_num = -1; link = malloc(total_links*sizeof(*link)); memset(link, 0, total_links*sizeof(*link)); dev->link_list = link; } for (link_num = link_num + 1; link_num < total_links; link_num++) { link->link_num = link_num; link->dev = dev; link->next = link + 1; last = link; link = link->next; } last->next = NULL; } static u32 cpu_bus_scan(device_t dev, u32 passthru) { struct bus *cpu_bus; device_t dev_mc; #if CONFIG_CBB device_t pci_domain; #endif int i,j; int nodes; unsigned nb_cfg_54; unsigned siblings; int cores_found; int disable_siblings; unsigned ApicIdCoreIdSize; nb_cfg_54 = 0; ApicIdCoreIdSize = (cpuid_ecx(0x80000008)>>12 & 0xf); if(ApicIdCoreIdSize) { siblings = (1<bus) { printk(BIOS_DEBUG, "%s found", dev_path(dev_mc)); pci_domain = dev_mc->bus->dev; if(pci_domain && (pci_domain->path.type == DEVICE_PATH_DOMAIN)) { printk(BIOS_DEBUG, "\n%s move to ",dev_path(dev_mc)); dev_mc->bus->secondary = CONFIG_CBB; // move to 0xff printk(BIOS_DEBUG, "%s",dev_path(dev_mc)); } else { printk(BIOS_DEBUG, " but it is not under pci_domain directly "); } printk(BIOS_DEBUG, "\n"); } dev_mc = dev_find_slot(CONFIG_CBB, PCI_DEVFN(CONFIG_CDB, 0)); if(!dev_mc) { dev_mc = dev_find_slot(0, PCI_DEVFN(0x18, 0)); if (dev_mc && dev_mc->bus) { printk(BIOS_DEBUG, "%s found\n", dev_path(dev_mc)); pci_domain = dev_mc->bus->dev; if(pci_domain && (pci_domain->path.type == DEVICE_PATH_DOMAIN)) { if((pci_domain->link_list) && (pci_domain->link_list->children == dev_mc)) { printk(BIOS_DEBUG, "%s move to ",dev_path(dev_mc)); dev_mc->bus->secondary = CONFIG_CBB; // move to 0xff printk(BIOS_DEBUG, "%s\n",dev_path(dev_mc)); while(dev_mc){ printk(BIOS_DEBUG, "%s move to ",dev_path(dev_mc)); dev_mc->path.pci.devfn -= PCI_DEVFN(0x18,0); printk(BIOS_DEBUG, "%s\n",dev_path(dev_mc)); dev_mc = dev_mc->sibling; } } } } } #endif dev_mc = dev_find_slot(CONFIG_CBB, PCI_DEVFN(CONFIG_CDB, 0)); if (!dev_mc) { printk(BIOS_ERR, "%02x:%02x.0 not found", CONFIG_CBB, CONFIG_CDB); die(""); } sysconf_init(dev_mc); nodes = sysconf.nodes; #if CONFIG_CBB && (NODE_NUMS > 32) if(nodes>32) { // need to put node 32 to node 63 to bus 0xfe if(pci_domain->link_list && !pci_domain->link_list->next) { struct bus *new_link = new_link(pci_domain); pci_domain->link_list->next = new_link; new_link->link_num = 1; new_link->dev = pci_domain; new_link->children = 0; printk(BIOS_DEBUG, "%s links now 2\n", dev_path(pci_domain)); } pci_domain->link_list->next->secondary = CONFIG_CBB - 1; } #endif /* Find which cpus are present */ cpu_bus = dev->link_list; /* Always use the devicetree node with lapic_id 0 for BSP. */ remap_bsp_lapic(cpu_bus); for(i = 0; i < nodes; i++) { device_t cdb_dev; unsigned busn, devn; struct bus *pbus; busn = CONFIG_CBB; devn = CONFIG_CDB+i; pbus = dev_mc->bus; #if CONFIG_CBB && (NODE_NUMS > 32) if(i>=32) { busn--; devn-=32; pbus = pci_domain->link_list->next); } #endif /* Find the cpu's pci device */ cdb_dev = dev_find_slot(busn, PCI_DEVFN(devn, 0)); if (!cdb_dev) { /* If I am probing things in a weird order * ensure all of the cpu's pci devices are found. */ int fn; for(fn = 0; fn <= 5; fn++) { //FBDIMM? cdb_dev = pci_probe_dev(NULL, pbus, PCI_DEVFN(devn, fn)); } cdb_dev = dev_find_slot(busn, PCI_DEVFN(devn, 0)); } if (cdb_dev) { /* Ok, We need to set the links for that device. * otherwise the device under it will not be scanned */ add_more_links(cdb_dev, 8); } cores_found = 0; // one core cdb_dev = dev_find_slot(busn, PCI_DEVFN(devn, 3)); int enable_node = cdb_dev && cdb_dev->enabled; if (enable_node) { j = pci_read_config32(cdb_dev, 0xe8); cores_found = (j >> 12) & 3; // dev is func 3 if (siblings > 3) cores_found |= (j >> 13) & 4; printk(BIOS_DEBUG, " %s siblings=%d\n", dev_path(cdb_dev), cores_found); } u32 jj; if(disable_siblings) { jj = 0; } else { jj = cores_found; } for (j = 0; j <=jj; j++ ) { u32 apic_id = i * (nb_cfg_54?(siblings+1):1) + j * (nb_cfg_54?1:64); // ? #if CONFIG_ENABLE_APIC_EXT_ID && (CONFIG_APIC_ID_OFFSET>0) if(sysconf.enabled_apic_ext_id) { if (apic_id != 0 || sysconf.lift_bsp_apicid) { apic_id += sysconf.apicid_offset; } } #endif device_t cpu = add_cpu_device(cpu_bus, apic_id, enable_node); if (cpu) amd_cpu_topology(cpu, i, j); } //j } return passthru; } static void cpu_bus_init(device_t dev) { initialize_cpus(dev->link_list); #if CONFIG_AMD_SB_CIMX sb_After_Pci_Init(); sb_Mid_Post_Init(); #endif } static void cpu_bus_set_resources(struct device *dev) { struct resource *resource = find_resource(dev, 0xc0010058); if (resource) { report_resource_stored(dev, resource, " "); } pci_dev_set_resources(dev); } static struct device_operations cpu_bus_ops = { .read_resources = DEVICE_NOOP, .set_resources = cpu_bus_set_resources, .enable_resources = DEVICE_NOOP, .init = cpu_bus_init, .scan_bus = cpu_bus_scan, }; static void root_complex_enable_dev(struct device *dev) { static int done = 0; /* Do not delay UMA setup, as a device on the PCI bus may evaluate the global uma_memory variables already in its enable function. */ if (!done) { setup_bsp_ramtop(); setup_uma_memory(); done = 1; } /* Set the operations if it is a special bus type */ if (dev->path.type == DEVICE_PATH_DOMAIN) { dev->ops = &pci_domain_ops; } else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER) { dev->ops = &cpu_bus_ops; } } struct chip_operations northbridge_amd_amdfam10_root_complex_ops = { CHIP_NAME("AMD FAM10 Root Complex") .enable_dev = root_complex_enable_dev, };