#define ASSEMBLY 1 #include #include #include #include #include #include #include #include "option_table.h" #include "pc80/mc146818rtc_early.c" #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "ram/ramtest.c" #define K8_HT_FREQ_1G_SUPPORT 1 #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/nvidia/ck804/ck804_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" #include "cpu/amd/model_fxx/apic_timer.c" #include "lib/delay.c" #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" #include "cpu/amd/dualcore/dualcore.c" #include "northbridge/amd/amdk8/setup_resource_map.c" #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) static void hard_reset(void) { set_bios_reset(); /* full reset */ outb(0x0a, 0x0cf9); outb(0x0e, 0x0cf9); } static void soft_reset(void) { set_bios_reset(); #if 1 /* link reset */ outb(0x02, 0x0cf9); outb(0x06, 0x0cf9); #endif } static void memreset_setup(void) { } static void memreset(int controllers, const struct mem_controller *ctrl) { } static inline void activate_spd_rom(const struct mem_controller *ctrl) { /* nothing to do */ } static inline int spd_read_byte(unsigned device, unsigned address) { return smbus_read_byte(device, address); } #define QRANK_DIMM_SUPPORT 1 #include "northbridge/amd/amdk8/raminit.c" #include "northbridge/amd/amdk8/coherent_ht.c" #include "sdram/generic_sdram.c" /* tyan does not want the default */ #include "resourcemap.c" #define FIRST_CPU 1 #define SECOND_CPU 1 #define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) #define CK804_NUM 1 #include "southbridge/nvidia/ck804/ck804_early_setup_ss.h" //set GPIO to input mode #define CK804_MB_SETUP \ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+15, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* M8,GPIO16, PCIXA_PRSNT2_L*/ \ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+44, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P5,GPIO45, PCIXA_PRSNT1_L*/ \ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+16, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* K4,GPIO17, PCIXB_PRSNT1_L*/ \ RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+45, ~(0xff), ((0<<4)|(0<<2)|(0<<0)),/* P7,GPIO46, PCIXB_PRSNT2_L*/ \ #include "southbridge/nvidia/ck804/ck804_early_setup.c" static void main(unsigned long bist) { static const struct mem_controller cpu[] = { #if FIRST_CPU { .node_id = 0, .f0 = PCI_DEV(0, 0x18, 0), .f1 = PCI_DEV(0, 0x18, 1), .f2 = PCI_DEV(0, 0x18, 2), .f3 = PCI_DEV(0, 0x18, 3), .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, }, #endif #if SECOND_CPU { .node_id = 1, .f0 = PCI_DEV(0, 0x19, 0), .f1 = PCI_DEV(0, 0x19, 1), .f2 = PCI_DEV(0, 0x19, 2), .f3 = PCI_DEV(0, 0x19, 3), .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, }, #endif }; int needs_reset; if (bist == 0) { k8_init_and_stop_secondaries(); } w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); uart_init(); console_init(); /* Halt if there was a built in self test failure */ // report_bist_failure(bist); setup_s2892_resource_map(); needs_reset = setup_coherent_ht_domain(); needs_reset |= ht_setup_chains_x(); needs_reset |= ck804_early_setup_x(); if (needs_reset) { print_info("ht reset -\r\n"); soft_reset(); } enable_smbus(); memreset_setup(); sdram_initialize(ARRAY_SIZE(cpu), cpu); }