#define ASSEMBLY 1

#include <stdint.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <cpu/x86/lapic.h>
#include <arch/cpu.h>
#include "option_table.h"
#include "pc80/mc146818rtc_early.c"
#include "pc80/serial.c"
#include "arch/i386/lib/console.c"
#include "ram/ramtest.c"
#include "northbridge/amd/amdk8/incoherent_ht.c"
#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
#include "northbridge/amd/amdk8/raminit.h"
#include "cpu/amd/model_fxx/apic_timer.c"
#include "lib/delay.c"
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdk8/reset_test.c"
#include "northbridge/amd/amdk8/debug.c"
#include "northbridge/amd/amdk8/cpu_rev.c"
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "cpu/x86/bist.h"
#include "cpu/amd/dualcore/dualcore.c"

#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)

/* Look up a which bus a given node/link combination is on.
 * return 0 when we can't find the answer.
 */
static unsigned node_link_to_bus(unsigned node, unsigned link)
{
        unsigned reg;
        
        for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
                unsigned config_map;
                config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg);
                if ((config_map & 3) != 3) {
                        continue; 
                }       
                if ((((config_map >> 4) & 7) == node) &&
                        (((config_map >> 8) & 3) == link))
                {       
                        return (config_map >> 16) & 0xff;
                }       
        }       
        return 0;
}       

static void hard_reset(void)
{
        device_t dev;

        /* Find the device */
        dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 3);

        set_bios_reset();

        /* enable cf9 */
        pci_write_config8(dev, 0x41, 0xf1);
        /* reset */
        outb(0x0e, 0x0cf9);
}

static void soft_reset(void)
{
        device_t dev;

        /* Find the device */
        dev = PCI_DEV(node_link_to_bus(0, 2), 0x04, 0);

        set_bios_reset();
        pci_write_config8(dev, 0x47, 1);
}

static void memreset_setup(void)
{
   if (is_cpu_pre_c0()) {
        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=0
   }
   else {
        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);  //REVC_MEMRST_EN=1
   }
        outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); 
}

static void memreset(int controllers, const struct mem_controller *ctrl)
{
   if (is_cpu_pre_c0()) {
        udelay(800);
        outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
        udelay(90);
   }
}

static inline void activate_spd_rom(const struct mem_controller *ctrl)
{
	/* nothing to do */
}

static inline int spd_read_byte(unsigned device, unsigned address)
{
	return smbus_read_byte(device, address);
}

//#include "northbridge/amd/amdk8/setup_resource_map.c"
#define QRANK_DIMM_SUPPORT 1
#include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "sdram/generic_sdram.c"

 /* tyan does not want the default */
#include "resourcemap.c"

#define FIRST_CPU  1
#define SECOND_CPU 1
#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
static void main(unsigned long bist)
{
	static const struct mem_controller cpu[] = {
#if FIRST_CPU
		{
			.node_id = 0,
			.f0 = PCI_DEV(0, 0x18, 0),
			.f1 = PCI_DEV(0, 0x18, 1),
			.f2 = PCI_DEV(0, 0x18, 2),
			.f3 = PCI_DEV(0, 0x18, 3),
			.channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
			.channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
		},
#endif
#if SECOND_CPU
		{
			.node_id = 1,
			.f0 = PCI_DEV(0, 0x19, 0),
			.f1 = PCI_DEV(0, 0x19, 1),
			.f2 = PCI_DEV(0, 0x19, 2),
			.f3 = PCI_DEV(0, 0x19, 3),
			.channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
			.channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
		},
#endif
	};
        int needs_reset;
#if CONFIG_LOGICAL_CPUS==1
        struct node_core_id id;
#else
        unsigned nodeid;
#endif

        if (bist == 0) {
                k8_init_and_stop_secondaries();
        }

        w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
        uart_init();    
        console_init(); 
                
        /* Halt if there was a built in self test failure */
//        report_bist_failure(bist);

        setup_s2881_resource_map();
        needs_reset = setup_coherent_ht_domain();
        // automatically set that for you, but you might meet tight space
        needs_reset |= ht_setup_chains_x();
        if (needs_reset) {
                print_info("ht reset -\r\n");
                soft_reset();
        }
	
	enable_smbus();
	memreset_setup();
	sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu);

}