chip soc/intel/alderlake # Support 5200 MT/s memory register "max_dram_speed_mts" = "5200" device domain 0 on subsystemid 0x1558 0x3702 inherit device ref xhci on register "usb2_ports" = "{ [0] = USB2_PORT_MID(OC_SKIP), /* Type-A 3.2 Gen 2 (Left, Front) */ [1] = USB2_PORT_MID(OC_SKIP), /* Type-A 3.2 Gen 2 (Left, Rear) */ [5] = USB2_PORT_MID(OC_SKIP), /* Camera */ [6] = USB2_PORT_MID(OC_SKIP), /* Per-key RGB */ /* Port reset messaging cannot be used, * so do not use USB2_PORT_TYPE_C for these */ [8] = USB2_PORT_MID(OC_SKIP), /* Type-C Thunderbolt (Right, Front) */ [9] = USB2_PORT_MID(OC_SKIP), /* Type-C Thunderbolt with PD (Right, Rear) */ [13] = USB2_PORT_MID(OC_SKIP), /* Bluetooth */ }" register "usb3_ports" = "{ [0] = USB3_PORT_DEFAULT(OC_SKIP), /* Type-A 3.2 Gen 2 (Left, Front) */ [2] = USB3_PORT_DEFAULT(OC_SKIP), /* Type-A 3.2 Gen 2 (Left, Rear) */ }" end device ref i2c0 on # Touchpad I2C bus register "serial_io_i2c_mode[PchSerialIoIndexI2C0]" = "PchSerialIoPci" chip drivers/i2c/hid register "generic.hid" = ""ELAN0412"" register "generic.desc" = ""ELAN Touchpad"" register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_E7)" register "generic.detect" = "1" register "hid_desc_reg_offset" = "0x01" device i2c 15 on end end chip drivers/i2c/hid register "generic.hid" = ""FTCS1000"" register "generic.desc" = ""FocalTech Touchpad"" register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_E7)" register "generic.detect" = "1" register "hid_desc_reg_offset" = "0x01" device i2c 38 on end end end device ref pcie5_0 on # CPU PCIe RP#3 x4, CLKOUT 2, CLKREQ 11 (SSD2) register "cpu_pcie_rp[CPU_RP(2)]" = "{ .clk_src = 2, .clk_req = 11, .flags = PCIE_RP_LTR | PCIE_RP_AER, }" end device ref pcie5_1 on # CPU PCIe RP#2 x8, Clock 14 (DGPU) register "cpu_pcie_rp[CPU_RP(3)]" = "{ .clk_src = 14, .clk_req = 14, .flags = PCIE_RP_LTR | PCIE_RP_AER, }" end device ref pcie4_0 on # CPU PCIe RP#1 x4, Clock 12 (SSD3) register "cpu_pcie_rp[CPU_RP(1)]" = "{ .clk_src = 12, .clk_req = 12, .flags = PCIE_RP_LTR | PCIE_RP_AER, }" end device ref pcie_rp7 on # PCH RP#7 x1, Clock 13 (GLAN) register "pch_pcie_rp[PCH_RP(7)]" = "{ .clk_src = 13, .clk_req = 13, .flags = PCIE_RP_LTR | PCIE_RP_AER, }" device pci 00.0 on end end device ref pcie_rp8 on # PCH RP#8 x1, Clock 9 (WLAN) register "pch_pcie_rp[PCH_RP(8)]" = "{ .clk_src = 9, .clk_req = 9, .flags = PCIE_RP_LTR | PCIE_RP_AER, }" end device ref pcie_rp9 on # PCH RP#9 x4, Clock 15 (TBT) register "pch_pcie_rp[PCH_RP(9)]" = "{ .clk_src = 15, .clk_req = 15, .flags = PCIE_RP_HOTPLUG | PCIE_RP_LTR, }" end device ref pcie_rp21 on # PCH RP#21 x4, Clock 10 (SSD1) register "pch_pcie_rp[PCH_RP(21)]" = "{ .clk_src = 10, .clk_req = 10, .flags = PCIE_RP_LTR | PCIE_RP_AER, }" end end end