# SPDX-License-Identifier: GPL-2.0-only chip soc/intel/alderlake # Support 5600 MT/s memory register "max_dram_speed_mts" = "5600" device domain 0 on subsystemid 0x1558 0x0353 inherit device ref xhci on register "usb2_ports" = "{ /* Port reset messaging cannot be used, * so do not use USB2_PORT_TYPE_C for these */ [0] = USB2_PORT_MID(OC_SKIP), /* J_TYPEC1 */ [1] = USB2_PORT_MID(OC_SKIP), /* J_TYPEC2 */ [2] = USB2_PORT_MID(OC_SKIP), /* J_USB2 */ [3] = USB2_PORT_MID(OC_SKIP), /* J_USB1 (Audio board) */ [6] = USB2_PORT_MID(OC_SKIP), /* Fingerprint */ [7] = USB2_PORT_MID(OC_SKIP), /* Camera */ [13] = USB2_PORT_MID(OC_SKIP), /* Bluetooth */ }" register "usb3_ports" = "{ [0] = USB3_PORT_DEFAULT(OC_SKIP), /* Type-C */ [1] = USB3_PORT_DEFAULT(OC_SKIP), /* Type-C */ [2] = USB3_PORT_DEFAULT(OC_SKIP), /* J_USB2 */ [3] = USB3_PORT_DEFAULT(OC_SKIP), /* J_USB1 (Audio board) */ }" end device ref i2c0 on # Touchpad I2C bus register "serial_io_i2c_mode[PchSerialIoIndexI2C0]" = "PchSerialIoPci" chip drivers/i2c/hid register "generic.hid" = ""ELAN0412"" register "generic.desc" = ""ELAN Touchpad"" register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_E7)" register "generic.detect" = "1" register "hid_desc_reg_offset" = "0x01" device i2c 15 on end end chip drivers/i2c/hid register "generic.hid" = ""FTCS1000"" register "generic.desc" = ""FocalTech Touchpad"" register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_E7)" register "generic.detect" = "1" register "hid_desc_reg_offset" = "0x01" device i2c 38 on end end end device ref pcie5_0 on # DGPU register "cpu_pcie_rp[CPU_RP(2)]" = "{ .clk_src = 14, .clk_req = 14, .flags = PCIE_RP_LTR | PCIE_RP_AER, }" end device ref pcie_rp3 on # GLAN register "pch_pcie_rp[PCH_RP(3)]" = "{ .clk_src = 13, .clk_req = 13, .flags = PCIE_RP_LTR | PCIE_RP_AER, }" device pci 00.0 on end # Realtek RTL8111H end device ref pcie_rp8 on # WLAN register "pch_pcie_rp[PCH_RP(8)]" = "{ .clk_src = 11, .clk_req = 11, .flags = PCIE_RP_LTR | PCIE_RP_AER, }" end device ref pcie_rp13 on # J_SSD1 register "pch_pcie_rp[PCH_RP(13)]" = "{ .clk_src = 10, .clk_req = 10, .flags = PCIE_RP_LTR | PCIE_RP_AER, }" end device ref pcie_rp21 on # J_SSD2 register "pch_pcie_rp[PCH_RP(21)]" = "{ .clk_src = 5, .clk_req = 5, .flags = PCIE_RP_LTR | PCIE_RP_AER, }" end device ref pcie_rp25 on # J_SSD3 register "pch_pcie_rp[PCH_RP(25)]" = "{ .clk_src = 15, .clk_req = 15, .flags = PCIE_RP_LTR | PCIE_RP_AER, }" end end end