chip soc/intel/alderlake register "common_soc_config" = "{ // Touchpad I2C bus .i2c[0] = { .speed = I2C_SPEED_FAST, .rise_time_ns = 80, .fall_time_ns = 110, }, }" # Enable Enhanced Intel SpeedStep register "eist_enable" = "1" # Enable C6 DRAM register "enable_c6dram" = "1" # Thermal register "tcc_offset" = "8" # Disable package C state demotion on Raptorlake as a W/A for S0ix issues # seen on J0 and Q0 SKUs register "disable_package_c_state_demotion" = "1" device cpu_cluster 0 on end device domain 0 on device ref system_agent on end device ref igpu on # DDIA is eDP, DDIB is HDMI register "ddi_portA_config" = "1" register "ddi_ports_config" = "{ [DDI_PORT_A] = DDI_ENABLE_HPD, [DDI_PORT_B] = DDI_ENABLE_HPD | DDI_ENABLE_DDC, }" register "gfx" = "GMA_DEFAULT_PANEL(0)" end device ref shared_sram on end device ref cnvi_wifi on register "cnvi_bt_core" = "true" register "cnvi_bt_audio_offload" = "true" chip drivers/wifi/generic register "wake" = "GPE0_PME_B0" device generic 0 on end end end device ref i2c1 on register "serial_io_i2c_mode[PchSerialIoIndexI2C1]" = "PchSerialIoPci" end device ref heci1 on end device ref sata on register "sata_salp_support" = "1" register "sata_ports_enable[1]" = "1" # SSD1 # FIXME: DevSlp breaks S0ix #register "sata_ports_dev_slp[1]" = "1" # GPP_H12 (SATA1_DEVSLP1) end device ref pch_espi on register "gen1_dec" = "0x00040069" # EC PM channel register "gen2_dec" = "0x00fc0e01" # AP/EC command register "gen3_dec" = "0x00fc0f01" # AP/EC debug chip drivers/pc80/tpm device pnp 0c31.0 on end end end device ref p2sb on end device ref hda on register "pch_hda_audio_link_hda_enable" = "1" register "pch_hda_sdi_enable[0]" = "1" register "pch_hda_idisp_codec_enable" = "1" register "pch_hda_idisp_link_frequency" = "HDA_LINKFREQ_96MHZ" register "pch_hda_idisp_link_tmode" = "HDA_TMODE_8T" end device ref smbus on end device ref fast_spi on end end end