# SPDX-License-Identifier: GPL-2.0-only

chip soc/intel/meteorlake
	device domain 0 on
		subsystemid 0x1558 0xa743 inherit

		device ref tbt_pcie_rp0 on end
		device ref tcss_xhci on end
		device ref tcss_dma0 on end
		device ref xhci on
			register "usb2_ports" = "{
				[0] = USB2_PORT_MID(OC_SKIP),	/* J_AUD1 / AJ_USB3_1 */
				[1] = USB2_PORT_MID(OC_SKIP),	/* J_TYPEC1 */
				[2] = USB2_PORT_MID(OC_SKIP),	/* J_USB3_1 */
				[5] = USB2_PORT_MID(OC_SKIP),	/* TBT */
				[6] = USB2_PORT_MID(OC_SKIP),	/* Camera */
				[9] = USB2_PORT_MID(OC_SKIP),	/* Bluetooth */
			}"
			register "usb3_ports" = "{
				[0] = USB3_PORT_DEFAULT(OC_SKIP),	/* J_AUD1 / AJ_USB3_1 */
				[1] = USB3_PORT_DEFAULT(OC_SKIP),	/* J_USB3_1 */
			}"
		end
		device ref i2c0 on
			# Touchpad I2C bus
			register "serial_io_i2c_mode[PchSerialIoIndexI2C0]" = "PchSerialIoPci"
			chip drivers/i2c/hid
				register "generic.hid" = ""ELAN0412""
				register "generic.desc" = ""ELAN Touchpad""
				register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_B00)"
				register "generic.detect" = "1"
				register "hid_desc_reg_offset" = "0x01"
				device i2c 15 on end
			end
			chip drivers/i2c/hid
				register "generic.hid" = ""FTCS1000""
				register "generic.desc" = ""FocalTech Touchpad""
				register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_B00)"
				register "generic.detect" = "1"
				register "hid_desc_reg_offset" = "0x01"
				device i2c 38 on end
			end
		end
		device ref pcie_rp5 on
			# GLAN
			register "pcie_rp[PCH_RP(5)]" = "{
				.clk_src = 2,
				.clk_req = 2,
				.flags = PCIE_RP_LTR | PCIE_RP_AER | PCIE_RP_CLK_SRC_UNUSED,
			}"
			register "pcie_clk_config_flag[2]" = "PCIE_CLK_FREE_RUNNING"
			device pci 00.0 on end
		end
		device ref pcie_rp6 on
			# Card Reader
			register "pcie_rp[PCH_RP(6)]" = "{
				.clk_src = 3,
				.clk_req = 3,
				.flags = PCIE_RP_LTR | PCIE_RP_AER,
			}"
		end
		device ref pcie_rp8 on
			# WLAN
			register "pcie_rp[PCH_RP(8)]" = "{
				.clk_src = 5,
				.clk_req = 5,
				.flags = PCIE_RP_LTR | PCIE_RP_AER,
			}"
		end
		device ref pcie_rp10 on
			# SSD2
			# XXX: Schematics show RP[13:16] used
			register "pcie_rp[PCH_RP(10)]" = "{
				.clk_src = 8,
				.clk_req = 8,
				.flags = PCIE_RP_LTR | PCIE_RP_AER,
			}"
		end
		device ref pcie_rp11 on
			# SSD1
			# XXX: Schematics show RP[17:20] used
			register "pcie_rp[PCH_RP(11)]" = "{
				.clk_src = 7,
				.clk_req = 7,
				.flags = PCIE_RP_LTR | PCIE_RP_AER,
			}"
		end
		device ref hda on
			subsystemid 0x1558 0xa763
		end
		device ref gbe on end
	end
end