# SPDX-License-Identifier: GPL-2.0-only

chip soc/intel/cannonlake
	register "common_soc_config" = "{
		// Touchpad I2C bus
		.i2c[0] = {
			.speed = I2C_SPEED_FAST,
			.rise_time_ns = 80,
			.fall_time_ns = 110,
		},
	}"

# CPU (soc/intel/cannonlake/cpu.c)
	# Power limit
	register "power_limits_config" = "{
		.tdp_pl1_override = 125,
		.tdp_pl2_override = 160,
	}"

	# Enable Enhanced Intel SpeedStep
	register "eist_enable" = "true"

# FSP Memory (soc/intel/cannonlake/romstage/fsp_params.c)
	register "enable_c6dram" = "1"

# FSP Silicon (soc/intel/cannonlake/fsp_params.c)
	# Serial I/O
	register "SerialIoDevMode" = "{
		[PchSerialIoIndexI2C0] = PchSerialIoPci, // Touchpad I2C bus
		[PchSerialIoIndexUART2] = PchSerialIoSkipInit, // Debug console
	}"

	# Misc
	register "AcousticNoiseMitigation" = "1"

	# Power
	register "PchPmSlpS3MinAssert" = "3" # 50ms
	register "PchPmSlpS4MinAssert" = "1" # 1s
	register "PchPmSlpSusMinAssert" = "4" # 4s
	register "PchPmSlpAMinAssert" = "4" # 2s

	# Thermal
	register "tcc_offset" = "13"

# PM Util (soc/intel/cannonlake/pmutil.c)
	# GPE configuration
	# Note that GPE events called out in ASL code rely on this
	# route. i.e. If this route changes then the affected GPE
	# offset bits also need to be changed.
	register "gpe0_dw0" = "PMC_GPP_K"
	register "gpe0_dw1" = "PMC_GPP_G"
	register "gpe0_dw2" = "PMC_GPP_E"

# Actual device tree
	device domain 0 on
		subsystemid 0x1558 0x7714 inherit
		device ref peg0		on
			# PCI Express Graphics #0 x16, Clock 7 (NVIDIA GPU)
			register "PcieClkSrcUsage[7]" = "0x40"
			register "PcieClkSrcClkReq[7]" = "7"

			device pci 00.0 on end # VGA controller
			device pci 00.1 on end # Audio device
			device pci 00.2 on end # USB xHCI Host controller
			device pci 00.3 on end # USB Type-C UCSI controller
		end
		device ref dptf		on	end
		device ref thermal	on	end
		device ref xhci		on
			register "usb2_ports" = "{
				[0] = USB2_PORT_MID(OC_SKIP),		/* USB 3_2 */
				[1] = USB2_PORT_MID(OC_SKIP),		/* USB 3_1 */
				[2] = USB2_PORT_MID(OC_SKIP),		/* USB 3_4 */
				[3] = USB2_PORT_MID(OC_SKIP),		/* USB 3_3 */
				[4] = USB2_PORT_MID(OC_SKIP),		/* Per-key RGB */
				[5] = USB2_PORT_TYPE_C(OC_SKIP),	/* USB Type-C */
				[6] = USB2_PORT_MID(OC_SKIP),		/* XFI */
				[7] = USB2_PORT_MID(OC_SKIP),		/* Camera */
				[8] = USB2_PORT_MID(OC_SKIP),		/* Light guide */
				[9] = USB2_PORT_MID(OC_SKIP),		/* Fingerprint */
				[13] = USB2_PORT_MID(OC_SKIP),		/* Bluetooth */
			}"
			register "usb3_ports" = "{
				[0] = USB3_PORT_DEFAULT(OC_SKIP),	/* USB 3_2 */
				[1] = USB3_PORT_DEFAULT(OC_SKIP),	/* ANX7440 */
				[2] = USB3_PORT_DEFAULT(OC_SKIP),	/* USB 3_4 */
				[3] = USB3_PORT_DEFAULT(OC_SKIP),	/* USB 3_3 */
			}"
		end
		device ref shared_sram	on	end
		device ref cnvi_wifi	on
			chip drivers/wifi/generic
				register "wake" = "PME_B0_EN_BIT"
				device generic 0 on end
			end
		end
		device ref i2c0		on
			chip drivers/i2c/hid
				register "generic.hid" = ""SYNA1202""
				register "generic.desc" = ""Synaptics Touchpad""
				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)"
				register "generic.detect" = "1"
				register "hid_desc_reg_offset" = "0x20"
				device i2c 2c on end
			end
		end
		device ref sata		on
			register "SataPortsEnable" = "{
				[1] = 1, /* SATA1A (SSD) */
				[3] = 1, /* SATA3 (M.2_SATA3) */
				[4] = 1, /* SATA4 (SSD2) */
			}"
		end
		device ref pcie_rp17	on
			# PCI Express root port #17 x4, Clock 14 (SSD2)
			register "PcieRpEnable[16]" = "1"
			register "PcieRpLtrEnable[16]" = "1"
			register "PcieClkSrcUsage[14]" = "16"
			register "PcieClkSrcClkReq[14]" = "14"
		end
		device ref pcie_rp21	on
			# PCI Express root port #21 x4, Clock 15 (SSD3)
			register "PcieRpEnable[20]" = "1"
			register "PcieRpLtrEnable[20]" = "1"
			register "PcieClkSrcUsage[15]" = "20"
			register "PcieClkSrcClkReq[15]" = "15"
		end
		device ref pcie_rp1	on
			# PCI Express root port #1 x4, Clock 6 (Thunderbolt)
			register "PcieRpEnable[0]" = "1"
			register "PcieRpLtrEnable[0]" = "1"
			register "PcieRpHotPlug[0]" = "1"
			register "PcieClkSrcUsage[6]" = "PCIE_CLK_RP0" # 0 is converted to PCIE_CLK_NOTUSED
			register "PcieClkSrcClkReq[6]" = "6"
		end
		device ref pcie_rp5	on
			# PCI Express root port #5 x4, Clock 10 (USB 3.2)
			register "PcieRpEnable[4]" = "1"
			register "PcieRpLtrEnable[4]" = "1"
			register "PcieClkSrcUsage[10]" = "4"
			register "PcieClkSrcClkReq[10]" = "10"
		end
		device ref pcie_rp9	on
			# PCI Express root port #9 x4, Clock 8 (SSD)
			register "PcieRpEnable[8]" = "1"
			register "PcieRpLtrEnable[8]" = "1"
			register "PcieClkSrcUsage[8]" = "8"
			register "PcieClkSrcClkReq[8]" = "8"
		end
		device ref pcie_rp13	on
			# PCI Express root port #13 x1, Clock 0 (WLAN)
			register "PcieRpEnable[12]" = "1"
			register "PcieRpLtrEnable[12]" = "1"
			register "PcieClkSrcUsage[0]" = "12"
			register "PcieClkSrcClkReq[0]" = "0"
		end
		device ref pcie_rp14	on
			# PCI Express root port #14 x1, Clock 1 (GLAN)
			register "PcieRpEnable[13]" = "1"
			register "PcieRpLtrEnable[13]" = "1"
			register "PcieClkSrcUsage[1]" = "13"
			register "PcieClkSrcClkReq[1]" = "1"
		end
		device ref pcie_rp15	on
			# PCI Express root port #15 x1, Clock 4 (Card Reader)
			register "PcieRpEnable[14]" = "1"
			register "PcieRpLtrEnable[14]" = "1"
			register "PcieClkSrcUsage[4]" = "14"
			register "PcieClkSrcClkReq[4]" = "4"
		end
		device ref lpc_espi	on
			register "gen1_dec" = "0x00040069"
			register "gen2_dec" = "0x00fc0e01"
			register "gen3_dec" = "0x00fc0f01"
			chip drivers/pc80/tpm
				device pnp 0c31.0 on end
			end
		end
		device ref hda		on
			register "PchHdaAudioLinkHda" = "1"
		end
		device ref smbus	on	end
	end
end