chip soc/intel/cannonlake
	register "common_soc_config" = "{
		// Touchpad I2C bus
		.i2c[0] = {
			.speed = I2C_SPEED_FAST,
			.rise_time_ns = 80,
			.fall_time_ns = 110,
		},
	}"

# CPU (soc/intel/cannonlake/cpu.c)
	# Power limit
	register "power_limits_config" = "{
		.tdp_pl1_override = 45,
		.tdp_pl2_override = 90,
	}"

	# Enable Enhanced Intel SpeedStep
	register "eist_enable" = "1"

# FSP Memory (soc/intel/cannonlake/romstage/fsp_params.c)
	register "enable_c6dram" = "1"

# FSP Silicon (soc/intel/cannonlake/fsp_params.c)
	# Misc
	register "AcousticNoiseMitigation" = "1"

	# Power
	register "PchPmSlpS3MinAssert" = "3" # 50ms
	register "PchPmSlpS4MinAssert" = "1" # 1s
	register "PchPmSlpSusMinAssert" = "4" # 4s
	register "PchPmSlpAMinAssert" = "4" # 2s

	# Thermal
	register "tcc_offset" = "8"

	# Serial IRQ Continuous
	register "serirq_mode" = "SERIRQ_CONTINUOUS"

# PM Util (soc/intel/cannonlake/pmutil.c)
	# GPE configuration
	# Note that GPE events called out in ASL code rely on this
	# route. i.e. If this route changes then the affected GPE
	# offset bits also need to be changed.
	register "gpe0_dw0" = "PMC_GPP_K"
	register "gpe0_dw1" = "PMC_GPP_G"
	register "gpe0_dw2" = "PMC_GPP_E"

# Actual device tree
	device cpu_cluster 0 on
		device lapic 0 on end
	end

	device domain 0 on
		subsystemid 0x1558 0x65d1 inherit
		device pci 00.0 on  end # Host Bridge
		device pci 01.0 on      # GPU Port
			# PCI Express Graphics #0 x16, Clock 8 (NVIDIA GPU)
			register "PcieClkSrcUsage[8]" = "0x40"
			register "PcieClkSrcClkReq[8]" = "8"
		end
		device pci 02.0 on  end # Integrated Graphics Device
		device pci 04.0 on      # SA Thermal device
			register "Device4Enable" = "1"
		end
		device pci 12.0 on  end # Thermal Subsystem
		device pci 12.5 off end # UFS SCS
		device pci 12.6 off end # GSPI #2
		device pci 13.0 off end # Integrated Sensor Hub
		device pci 14.0 on      # USB xHCI
			# USB2
			register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC_SKIP)" # USB 3.1 Gen 2 TYPE-C and DisplayPort
			register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC_SKIP)" # USB 3.1 Gen 2 TYPE-C
			register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # USB 3.1 Gen 2
			register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # USB 3.1 Gen 1 audio
			register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # USB 3.1 Gen 1 back
			register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # Fingerprint
			register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # Per-Key RGB keyboard
			register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # Camera
			register "usb2_ports[13]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
			# USB3
			register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB 3.1 Gen 2 TYPE-C and DisplayPort
			register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB 3.1 Gen 2 right
			register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB 3.1 Gen 2 TYPE-C (without TBT)
			register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB 3.1 Gen 2 TYPE-C (without TBT)
			register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB 3.1 Gen 1 audio
			register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB 3.1 Gen 1 back
		end
		device pci 14.2 on  end # Shared SRAM
		device pci 14.3 on      # CNVi wifi
			chip drivers/wifi/generic
				register "wake" = "PME_B0_EN_BIT"
				device generic 0 on end
			end
		end
		device pci 14.5 off end # SDCard
		device pci 15.0 on  end # I2C #0
		device pci 15.1 off end # I2C #1
		device pci 15.2 off end # I2C #2
		device pci 15.3 off end # I2C #3
		device pci 16.0 off end # Management Engine Interface 1
		device pci 16.1 off end # Management Engine Interface 2
		device pci 16.2 off end # Management Engine IDE-R
		device pci 16.3 off end # Management Engine KT Redirection
		device pci 16.4 off end # Management Engine Interface 3
		device pci 16.5 off end # Management Engine Interface 4
		device pci 17.0 on      # SATA
			register "SataPortsEnable[0]" = "1" # HDD (SATA0B)
			register "SataPortsEnable[1]" = "1" # SSD1 (SATA1A)
		end
		device pci 19.2 off end # UART #2
		device pci 1a.0 off end # eMMC
		device pci 1b.0 on      # PCI Express Port 17
			# PCI Express root port #17 x4, Clock 0 (Thunderbolt)
			register "PcieRpEnable[16]" = "1"
			register "PcieRpLtrEnable[16]" = "1"
			register "PcieRpHotPlug[16]" = "1"
			register "PcieClkSrcUsage[0]" = "16"
			register "PcieClkSrcClkReq[0]" = "0"
		end
		device pci 1b.1 off end # PCI Express Port 18
		device pci 1b.2 off end # PCI Express Port 19
		device pci 1b.3 off end # PCI Express Port 20
		device pci 1b.4 on      # PCI Express Port 21
			# PCI Express root port #21 x4, Clock 10 (SSD2)
			register "PcieRpEnable[20]" = "1"
			register "PcieRpLtrEnable[20]" = "1"
			register "PcieClkSrcUsage[10]" = "20"
			register "PcieClkSrcClkReq[10]" = "10"
			register "PcieRpSlotImplemented[20]" = "1"
		end
		device pci 1b.5 off end # PCI Express Port 22
		device pci 1b.6 off end # PCI Express Port 23
		device pci 1b.7 off end # PCI Express Port 24
		device pci 1c.0 off end # PCI Express Port 1
		device pci 1c.1 off end # PCI Express Port 2
		device pci 1c.2 off end # PCI Express Port 3
		device pci 1c.3 off end # PCI Express Port 4
		device pci 1c.4 off end # PCI Express Port 5
		device pci 1c.5 off end # PCI Express Port 6
		device pci 1c.6 off end # PCI Express Port 7
		device pci 1c.7 off end # PCI Express Port 8
		device pci 1d.0 on      # PCI Express Port 9
			# PCI Express root port #9 x4, Clock 9 (SSD1)
			register "PcieRpEnable[8]" = "1"
			register "PcieRpLtrEnable[8]" = "1"
			register "PcieClkSrcUsage[9]" = "8"
			register "PcieClkSrcClkReq[9]" = "9"
			register "PcieRpSlotImplemented[8]" = "1"
		end
		device pci 1d.1 off end # PCI Express Port 10
		device pci 1d.2 off end # PCI Express Port 11
		device pci 1d.3 off end # PCI Express Port 12
		device pci 1d.4 off end # PCI Express Port 13
		device pci 1d.5 on      # PCI Express Port 14
			# PCI Express root port #14 x1, Clock 5 (GLAN)
			register "PcieRpEnable[13]" = "1"
			register "PcieRpLtrEnable[13]" = "1"
			register "PcieClkSrcUsage[5]" = "13"
			register "PcieClkSrcClkReq[5]" = "5"
			register "PcieRpSlotImplemented[13]" = "1"
		end
		device pci 1d.6 on      # PCI Express Port 15
			# PCI Express root port #15 x1, Clock 7 (Card Reader)
			register "PcieRpEnable[14]" = "1"
			register "PcieRpLtrEnable[14]" = "1"
			register "PcieClkSrcUsage[7]" = "14"
			register "PcieClkSrcClkReq[7]" = "7"
			register "PcieRpSlotImplemented[14]" = "1"
		end
		device pci 1d.7 on      # PCI Express Port 16
			# PCI Express root port #16 x1, Clock 6 (WLAN)
			register "PcieRpEnable[15]" = "1"
			register "PcieRpLtrEnable[15]" = "1"
			register "PcieClkSrcUsage[6]" = "15"
			register "PcieClkSrcClkReq[6]" = "6"
			register "PcieRpSlotImplemented[15]" = "1"
		end
		device pci 1e.0 off end # UART #0
		device pci 1e.1 off end # UART #1
		device pci 1e.2 off end # GSPI #0
		device pci 1e.3 off end # GSPI #1
		device pci 1f.0 on      # LPC Interface
			register "gen1_dec" = "0x00040069"
			register "gen2_dec" = "0x00fc0e01"
			register "gen3_dec" = "0x00fc0f01"
			chip drivers/pc80/tpm
				device pnp 0c31.0 on end
			end
		end
		device pci 1f.1 off end # P2SB
		device pci 1f.2 hidden end # Power Management Controller
		device pci 1f.3 on      # Intel HDA
			register "PchHdaAudioLinkHda" = "1"
		end
		device pci 1f.4 on      # SMBus
			chip drivers/i2c/tas5825m
				register "id" = "0"
				device i2c 4e on end # (8bit address: 0x9c)
			end
		end
		device pci 1f.5 on  end # PCH SPI
		device pci 1f.6 off end # GbE
	end
end