/* * This file is part of the coreboot project. * * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include #include "AGESA.h" #include "CommonReturns.h" #include "AdvancedApi.h" #include #include "Filecode.h" #define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE //#define OPTION_HW_DQS_REC_EN_TRAINING TRUE /* AGESA will check the OEM configuration during preprocessing stage, * coreboot enable -Wundef option, so we should make sure we have all contanstand defined */ /* MEMORY_BUS_SPEED */ #define DDR400_FREQUENCY 200 ///< DDR 400 #define DDR533_FREQUENCY 266 ///< DDR 533 #define DDR667_FREQUENCY 333 ///< DDR 667 #define DDR800_FREQUENCY 400 ///< DDR 800 #define DDR1066_FREQUENCY 533 ///< DDR 1066 #define DDR1333_FREQUENCY 667 ///< DDR 1333 #define DDR1600_FREQUENCY 800 ///< DDR 1600 #define DDR1866_FREQUENCY 933 ///< DDR 1866 #define UNSUPPORTED_DDR_FREQUENCY 934 ///< Highest limit of DDR frequency /* QUANDRANK_TYPE */ #define QUADRANK_REGISTERED 0 ///< Quadrank registered DIMM #define QUADRANK_UNBUFFERED 1 ///< Quadrank unbuffered DIMM /* USER_MEMORY_TIMING_MODE */ #define TIMING_MODE_AUTO 0 ///< Use best rate possible #define TIMING_MODE_LIMITED 1 ///< Set user top limit #define TIMING_MODE_SPECIFIC 2 ///< Set user specified speed /* POWER_DOWN_MODE */ #define POWER_DOWN_BY_CHANNEL 0 ///< Channel power down mode #define POWER_DOWN_BY_CHIP_SELECT 1 ///< Chip select power down mode /* User makes option selections here * Comment out the items wanted to be included in the build. * Uncomment those items you with to REMOVE from the build. */ //#define BLDOPT_REMOVE_UDIMMS_SUPPORT TRUE //#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE //#define BLDOPT_REMOVE_ECC_SUPPORT TRUE //#define BLDOPT_REMOVE_BANK_INTERLEAVE TRUE //#define BLDOPT_REMOVE_DCT_INTERLEAVE TRUE //#define BLDOPT_REMOVE_NODE_INTERLEAVE TRUE //#define BLDOPT_REMOVE_PARALLEL_TRAINING TRUE //#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT TRUE #define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT TRUE //#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT TRUE //#define BLDOPT_REMOVE_ACPI_PSTATES TRUE //#define BLDOPT_REMOVE_SRAT TRUE //#define BLDOPT_REMOVE_SLIT TRUE //#define BLDOPT_REMOVE_WHEA TRUE //#define BLDOPT_REMOVE_DMI TRUE /*f15 Rev A1 ucode patch CpuF15OrMicrocodePatch0600011F */ #define BLDOPT_REMOVE_EARLY_SAMPLES FALSE //#define BLDOPT_REMOVE_HT_ASSIST TRUE //#define BLDOPT_REMOVE_MSG_BASED_C1E TRUE //#define BLDCFG_REMOVE_ACPI_PSTATES_PPC TRUE //#define BLDCFG_REMOVE_ACPI_PSTATES_PCT TRUE //#define BLDCFG_REMOVE_ACPI_PSTATES_PSD TRUE //#define BLDCFG_REMOVE_ACPI_PSTATES_PSS TRUE //#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS TRUE /* Build configuration values here. */ #define BLDCFG_VRM_CURRENT_LIMIT 120000 #define BLDCFG_VRM_LOW_POWER_THRESHOLD 0 #define BLDCFG_VRM_INRUSH_CURRENT_LIMIT 0 #define BLDCFG_PLAT_NUM_IO_APICS 3 #define BLDCFG_CORE_LEVELING_MODE CORE_LEVEL_LOWEST #define BLDCFG_MEM_INIT_PSTATE 0 #define BLDCFG_AMD_PSTATE_CAP_VALUE 0 #define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_SERVER #define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT DDR800_FREQUENCY//1600 #define BLDCFG_MEMORY_MODE_UNGANGED TRUE #define BLDCFG_MEMORY_QUAD_RANK_CAPABLE TRUE #define BLDCFG_MEMORY_QUADRANK_TYPE QUADRANK_REGISTERED #define BLDCFG_MEMORY_RDIMM_CAPABLE TRUE #define BLDCFG_MEMORY_UDIMM_CAPABLE TRUE #define BLDCFG_MEMORY_SODIMM_CAPABLE FALSE #define BLDCFG_LIMIT_MEMORY_TO_BELOW_1TB TRUE #define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING FALSE//TRUE #define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING FALSE//TRUE #define BLDCFG_MEMORY_CHANNEL_INTERLEAVING TRUE//TRUE #define BLDCFG_MEMORY_POWER_DOWN FALSE #define BLDCFG_POWER_DOWN_MODE POWER_DOWN_BY_CHANNEL #define BLDCFG_ONLINE_SPARE FALSE #define BLDCFG_BANK_SWIZZLE TRUE #define BLDCFG_TIMING_MODE_SELECT TIMING_MODE_AUTO #define BLDCFG_MEMORY_CLOCK_SELECT DDR800_FREQUENCY //DDR800_FREQUENCY #define BLDCFG_DQS_TRAINING_CONTROL TRUE #define BLDCFG_IGNORE_SPD_CHECKSUM FALSE #define BLDCFG_USE_BURST_MODE FALSE #define BLDCFG_MEMORY_ALL_CLOCKS_ON TRUE #define BLDCFG_ENABLE_ECC_FEATURE TRUE #define BLDCFG_ECC_REDIRECTION FALSE #define BLDCFG_SCRUB_IC_RATE 0 #define BLDCFG_ECC_SYNC_FLOOD TRUE #define BLDCFG_ECC_SYMBOL_SIZE 4 #define BLDCFG_PCI_MMIO_BASE CONFIG_MMCONF_BASE_ADDRESS #define BLDCFG_PCI_MMIO_SIZE CONFIG_MMCONF_BUS_NUMBER /** * Enable Message Based C1e CPU feature in multi-socket systems. * BLDCFG_PLATFORM_C1E_OPDATA element be defined with a valid IO port value, * else the feature cannot be enabled. */ #define BLDCFG_PLATFORM_C1E_MODE C1eModeMsgBased #define BLDCFG_PLATFORM_C1E_OPDATA 0x80//TODO //#define BLDCFG_PLATFORM_C1E_MODE_OPDATA1 0 //#define BLDCFG_PLATFORM_C1E_MODE_OPDATA2 0 #define BLDCFG_HEAP_DRAM_ADDRESS 0xB0000 #define BLDCFG_CFG_TEMP_PCIE_MMIO_BASE_ADDRESS 0xD0000000 #define BLDCFG_1GB_ALIGN FALSE //#define BLDCFG_PROCESSOR_SCOPE_NAME0 'C' //#define BLDCFG_PROCESSOR_SCOPE_NAME1 '0' // // Select the platform control flow mode for performance tuning. #define BLDCFG_PLATFORM_CONTROL_FLOW_MODE Nfcm /** * Enable the probe filtering performance tuning feature. * The probe filter provides filtering of broadcast probes to * improve link bandwidth and performance for multi- node systems. * * This feature may interact with other performance features. * TRUE -Enable the feature (default) if supported by all processors, * based on revision and presence of L3 cache. * The feature is not enabled if there are no coherent HT links. * FALSE -Do not enable the feature regardless of the configuration. */ //TODO enable it, //but AGESA set PFMode = 0; //PF Disable, HW never set PFInitDone //hang in F10HtAssistInit() do{...} while(PFInitDone != 1) #define BLDCFG_USE_HT_ASSIST FALSE /** * The socket and link match values are platform specific */ CONST MANUAL_BUID_SWAP_LIST ROMDATA h8scm_manual_swaplist[2] = { { /* On the reference platform, there is only one nc chain, so socket & link are 'don't care' */ HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, { //BUID Swap List { //BUID Swaps /* Each Non-coherent chain may have a list of device swaps, * Each item specify a device will be swap from its current id to a new one */ /* FromID 0x00 is the chain with the southbridge */ /* 'Move' device zero to device zero, All others are non applicable */ {0x00, 0x00}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, }, { //The ordered final BUIDs /* Specify the final BUID to be zero, All others are non applicable */ 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, } } }, /* The 2nd element in the array merely terminates the list */ { HT_LIST_TERMINAL, } }; #define HYPERTRANSPORT_V31_SUPPORT 1 #if HYPERTRANSPORT_V31_SUPPORT /** * The socket and link match values are platform specific * */ CONST CPU_TO_CPU_PCB_LIMITS ROMDATA h8scm_cpu2cpu_limit_list[2] = { { /* On the reference platform, these settings apply to all coherent links */ HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, /* Set incoming and outgoing links to 16 bit widths, and 3.2GHz frequencies */ HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_3200M, }, /* The 2nd element in the array merely terminates the list */ { HT_LIST_TERMINAL, } }; CONST IO_PCB_LIMITS ROMDATA h8scm_io_limit_list[2] = { { /* On the reference platform, there is only one nc chain, so socket & link are 'don't care' */ HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, /* Set upstream and downstream links to 16 bit widths, and limit frequencies to 3.2GHz */ HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_3200M, //Actually IO hub only support 2600M MAX }, /* The 2nd element in the array merely terminates the list */ { HT_LIST_TERMINAL, } }; #else /* HYPERTRANSPORT_V31_SUPPORT == 0 */ CONST CPU_TO_CPU_PCB_LIMITS ROMDATA h8scm_cpu2cpu_limit_list[2] = { { /* On the reference platform, these settings apply to all coherent links */ HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, /* Set incoming and outgoing links to 16 bit widths, and 1GHz frequencies */ HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_HT1_ONLY, }, /* The 2nd element in the array merely terminates the list */ { HT_LIST_TERMINAL, } }; CONST IO_PCB_LIMITS ROMDATA h8scm_io_limit_list[2] = { { /* On the reference platform, there is only one nc chain, so socket & link are 'don't care' */ HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, /* Set incoming and outgoing links to 16 bit widths, and 1GHz frequencies */ HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_HT1_ONLY, }, /* The 2nd element in the array merely terminates the list */ { HT_LIST_TERMINAL } }; #endif /* HYPERTRANSPORT_V31_SUPPORT == 0 */ /** * HyperTransport links will typically require an equalization at high frequencies. * This is called deemphasis. * * Deemphasis is specified as levels, for example, -3 db. * There are two levels for each link, its receiver deemphasis level and its DCV level, * which is based on the far side transmitter's deemphasis. * For each link, different levels may be required at each link frequency. * * Coherent connections between processors should have an entry for the port on each processor. * There should be one entry for the host root port of each non-coherent chain. * * AGESA initialization code does not set deemphasis on IO Devices. * A default is provided for internal links of MCM processors, and * those links will generally not need deemphasis structures. */ CONST CPU_HT_DEEMPHASIS_LEVEL ROMDATA h8scm_deemphasis_list[] = { /* Socket, Link, LowFreq, HighFreq, Receiver Deemphasis, Dcv Deemphasis */ /* Non-coherent link deemphasis. */ {0, 2, HT3_FREQUENCY_MIN, HT_FREQUENCY_1600M, DeemphasisLevelNone, DcvLevelNone}, {0, 2, HT_FREQUENCY_1800M, HT_FREQUENCY_1800M, DeemphasisLevelMinus3, DcvLevelMinus5}, {0, 2, HT_FREQUENCY_2000M, HT_FREQUENCY_2000M, DeemphasisLevelMinus6, DcvLevelMinus5}, {0, 2, HT_FREQUENCY_2200M, HT_FREQUENCY_2200M, DeemphasisLevelMinus6, DcvLevelMinus7}, {0, 2, HT_FREQUENCY_2400M, HT_FREQUENCY_2400M, DeemphasisLevelMinus8, DcvLevelMinus7}, {0, 2, HT_FREQUENCY_2600M, HT_FREQUENCY_2600M, DeemphasisLevelMinus11pre8, DcvLevelMinus9}, /* Coherent link deemphasis. */ {HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT3_FREQUENCY_MIN, HT_FREQUENCY_1600M, DeemphasisLevelNone, DcvLevelNone}, {HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_1800M, HT_FREQUENCY_1800M, DeemphasisLevelMinus3, DcvLevelMinus3}, {HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_2000M, HT_FREQUENCY_2000M, DeemphasisLevelMinus6, DcvLevelMinus6}, {HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_2200M, HT_FREQUENCY_2200M, DeemphasisLevelMinus6, DcvLevelMinus6}, {HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_2400M, HT_FREQUENCY_2400M, DeemphasisLevelMinus8, DcvLevelMinus8}, {HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_2600M, HT_FREQUENCY_MAX, DeemphasisLevelMinus11pre8, DcvLevelMinus11}, /* End of the list */ { HT_LIST_TERMINAL } }; CONST AP_MTRR_SETTINGS ROMDATA h8scm_ap_mtrr_list[] = { {AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1E}, {AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1E}, {AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000}, {AMD_AP_MTRR_FIX4k_C0000, 0x0000000000000000}, {AMD_AP_MTRR_FIX4k_C8000, 0x0000000000000000}, {AMD_AP_MTRR_FIX4k_D0000, 0x0000000000000000}, {AMD_AP_MTRR_FIX4k_D8000, 0x0000000000000000}, {AMD_AP_MTRR_FIX4k_E0000, 0x1818181818181818}, {AMD_AP_MTRR_FIX4k_E8000, 0x1818181818181818}, {AMD_AP_MTRR_FIX4k_F0000, 0x1818181818181818}, {AMD_AP_MTRR_FIX4k_F8000, 0x1818181818181818}, {CPU_LIST_TERMINAL} }; #define BLDCFG_BUID_SWAP_LIST &h8scm_manual_swaplist #define BLDCFG_HTFABRIC_LIMITS_LIST &h8scm_cpu2cpu_limit_list #define BLDCFG_HTCHAIN_LIMITS_LIST &h8scm_io_limit_list #define BLDCFG_PLATFORM_DEEMPHASIS_LIST &h8scm_deemphasis_list #define BLDCFG_AP_MTRR_SETTINGS_LIST &h8scm_ap_mtrr_list /* Process the options... * This file include MUST occur AFTER the user option selection settings */ #define AGESA_ENTRY_INIT_RESET TRUE//FALSE #define AGESA_ENTRY_INIT_RECOVERY FALSE #define AGESA_ENTRY_INIT_EARLY TRUE #define AGESA_ENTRY_INIT_POST TRUE #define AGESA_ENTRY_INIT_ENV TRUE #define AGESA_ENTRY_INIT_MID TRUE #define AGESA_ENTRY_INIT_LATE TRUE #define AGESA_ENTRY_INIT_S3SAVE TRUE #define AGESA_ENTRY_INIT_RESUME TRUE #define AGESA_ENTRY_INIT_LATE_RESTORE TRUE #define AGESA_ENTRY_INIT_GENERAL_SERVICES TRUE #include "SanMarinoInstall.h" /*---------------------------------------------------------------------------------------- * CUSTOMER OVERIDES MEMORY TABLE *---------------------------------------------------------------------------------------- */ //reference BKDG Table87: works #define F15_WL_SEED 0x3B //family15 BKDG recommand 3B RDIMM, 1A UDIMM. #define SEED_A 0x54 #define SEED_B 0x4D #define SEED_C 0x45 #define SEED_D 0x40 #define F10_WL_SEED 0x3B //family10 BKDG recommand 3B RDIMM, 1A UDIMM. /* * Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA * (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable * is populated, AGESA will base its settings on the data from the table. Otherwise, it will * use its default conservative settings. * I am not sure whether DefaultPlatformMemoryConfiguration is necessary. * If I comment out these code, H8SCM will still pass mem training. */ CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = { // // The following macros are supported (use comma to separate macros): // // MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap) // The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap. // AGESA will base on this value to disable unused MemClk to save power. // Example: // BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below: // Bit AM3/S1g3 pin name // 0 M[B,A]_CLK_H/L[0] // 1 M[B,A]_CLK_H/L[1] // 2 M[B,A]_CLK_H/L[2] // 3 M[B,A]_CLK_H/L[3] // 4 M[B,A]_CLK_H/L[4] // 5 M[B,A]_CLK_H/L[5] // 6 M[B,A]_CLK_H/L[6] // 7 M[B,A]_CLK_H/L[7] // And platform has the following routing: // CS0 M[B,A]_CLK_H/L[4] // CS1 M[B,A]_CLK_H/L[2] // CS2 M[B,A]_CLK_H/L[3] // CS3 M[B,A]_CLK_H/L[5] // Then platform can specify the following macro: // MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00) // // CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap) // The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap. // AGESA will base on this value to tristate unused CKE to save power. // // ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap) // The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap. // AGESA will base on this value to tristate unused ODT pins to save power. // // CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap) // The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap. // AGESA will base on this value to tristate unused Chip select to save power. // // NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel) // Specifies the number of DIMM slots per channel. // // NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel) // Specifies the number of Chip selects per channel. // // NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket) // Specifies the number of channels per socket. // // OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED) // Specifies DDR bus speed of channel ChannelID on socket SocketID. // // DRAM_TECHNOLOGY(ANY_SOCKET, DDR3_TECHNOLOGY), // Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...) // // WRITE_LEVELING_SEED(SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed, // Byte6Seed, Byte7Seed, ByteEccSeed) // Specifies the write leveling seed for a channel of a socket. // /* Specifies the write leveling seed for a channel of a socket. * WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID, * Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, * Byte4Seed, Byte5Seed, Byte6Seed, Byte7Seed, * ByteEccSeed) */ WRITE_LEVELING_SEED( ANY_SOCKET, ANY_CHANNEL, ALL_DIMMS, F15_WL_SEED, F15_WL_SEED, F15_WL_SEED, F15_WL_SEED, F15_WL_SEED, F15_WL_SEED, F15_WL_SEED, F15_WL_SEED, F15_WL_SEED), /* HW_RXEN_SEED(SocketID, ChannelID, DimmID, * Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, * Byte4Seed, Byte5Seed, Byte6Seed, Byte7Seed, ByteEccSeed) */ HW_RXEN_SEED( ANY_SOCKET, CHANNEL_A, ALL_DIMMS, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A), HW_RXEN_SEED( ANY_SOCKET, CHANNEL_B, ALL_DIMMS, SEED_B, SEED_B, SEED_B, SEED_B, SEED_B, SEED_B, SEED_B, SEED_B, SEED_B), HW_RXEN_SEED( ANY_SOCKET, CHANNEL_C, ALL_DIMMS, SEED_C, SEED_C, SEED_C, SEED_C, SEED_C, SEED_C, SEED_C, SEED_C, SEED_C), HW_RXEN_SEED( ANY_SOCKET, CHANNEL_D, ALL_DIMMS, SEED_D, SEED_D, SEED_D, SEED_D, SEED_D, SEED_D, SEED_D, SEED_D, SEED_D), NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), //max 3 PSO_END }; /* * These tables are optional and may be used to adjust memory timing settings */