chip soc/intel/apollolake device cpu_cluster 0 on device lapic 0 on end end # Graphics # TODO: # register "panel_cfg" = "{ # .up_delay_ms = 0, // T3 # .backlight_on_delay_ms = 0, // T7 # .backlight_off_delay_ms = 0, // T9 # .down_delay_ms = 0, // T10 # .cycle_delay_ms = 500, // T12 # .backlight_pwm_hz = 200, // PWM # }" # PM Util (soc/intel/apollolake/pmutil.c) # Enable the correct decode ranges on the LPC bus. register "lpc_ioe" = "LPC_IOE_EC_4E_4F | LPC_IOE_EC_62_66 | LPC_IOE_KBC_60_64" # Enable Audio Clock and Power gating register "hdaudio_clk_gate_enable" = "1" register "hdaudio_pwr_gate_enable" = "1" register "hdaudio_bios_config_lockdown" = "1" register "enhanced_cstates" = "1" register "pnp_settings" = "PNP_PERF_POWER" register "ModPhyIfValue" = "0x12" register "prt0_gpio" = "GPIO_PRT0_UDEF" register "usb_config_override" = "1" register "DisableComplianceMode" = "1" register "pcie_rp_clkreq_pin[0]" = "CLKREQ_DISABLED" register "pcie_rp_clkreq_pin[1]" = "CLKREQ_DISABLED" register "pcie_rp_clkreq_pin[2]" = "CLKREQ_DISABLED" register "pcie_rp_clkreq_pin[3]" = "CLKREQ_DISABLED" register "pcie_rp_clkreq_pin[4]" = "CLKREQ_DISABLED" register "pcie_rp_clkreq_pin[5]" = "CLKREQ_DISABLED" register "pcie_rp_deemphasis_enable[0]" = "1" register "pcie_rp_deemphasis_enable[1]" = "1" register "pcie_rp_deemphasis_enable[2]" = "1" register "pcie_rp_deemphasis_enable[3]" = "1" register "pcie_rp_deemphasis_enable[4]" = "1" register "pcie_rp_deemphasis_enable[5]" = "1" # GPE configuration register "gpe0_dw1" = "PMC_GPE_NW_63_32" register "gpe0_dw2" = "PMC_GPE_N_95_64" register "gpe0_dw3" = "PMC_GPE_NW_31_0" register "slp_s3_assertion_width_usecs" = "28000" device domain 0 on device pci 00.0 on end # Host Bridge device pci 00.1 off end # DPTF device pci 00.2 off end # NPK device pci 02.0 on end # Gen device pci 03.0 off end # Iunit device pci 0c.0 on # CNVi chip drivers/wifi/generic register "wake" = "GPE0A_CNVI_PME_STS" device generic 0 on end end end device pci 0d.0 off end # P2SB device pci 0d.1 off end # PMC device pci 0d.2 on end # SPI device pci 0d.3 off end # Shared SRAM device pci 0e.0 on end # Audio device pci 0f.0 on end # Heci1 device pci 0f.1 on end # Heci2 device pci 0f.2 on end # Heci3 device pci 11.0 off end # ISH device pci 12.0 on # SATA register "SataPortsEnable[0]" = "1" end device pci 13.0 off end # PCIe-A 0 Slot 1 device pci 13.1 off end # PCIe-A 1 device pci 13.2 off end # PCIe-A 2 Onboard Lan device pci 13.3 off end # PCIe-A 3 device pci 14.0 off end # PCIe-B 0 Slot2 device pci 14.1 off end # PCIe-B 1 Onboard M2 Slot(Wifi/BT) device pci 15.0 on # XHCI ### USB 2.0 Devices # Motherboard USB Type C register "usb2_port[0]" = "PORT_EN(OC1)" register "usb3_port[0]" = "PORT_EN(OC1)" # Motherboard USB 3.0 register "usb2_port[1]" = "PORT_EN(OC0)" register "usb3_port[1]" = "PORT_EN(OC0)" # Daughterboard USB 3.0 register "usb2_port[3]" = "PORT_EN(OC1)" # Daughterboard SD Card register "usb2_port[5]" = "PORT_EN(OC_SKIP)" register "usb3_port[4]" = "PORT_EN(OC1)" # Bluetooth register "usb2_port[6]" = "PORT_EN(OC_SKIP)" end device pci 15.1 off end # XDCI device pci 16.0 off end # I2C0 device pci 16.1 off end # I2C1 device pci 16.2 off end # I2C2 device pci 16.3 off end # I2C3 device pci 17.0 on end # I2C4 device pci 17.1 off end # I2C5 device pci 17.2 off end # I2C6 device pci 17.3 on # I2C7 # Handled by touchpad.asl end device pci 18.0 on end # UART #0 device pci 18.1 off end # UART #1 device pci 18.2 on end # UART #2 device pci 18.3 off end # UART #3 device pci 19.0 off end # SPI #0 device pci 19.1 off end # SPI #1 device pci 19.2 on end # SPI #2 device pci 1a.0 off end # PWM device pci 1b.0 off end # SDCard device pci 1c.0 off end # eMMC device pci 1d.0 off end # UFS device pci 1e.0 off end # SDIO device pci 1f.0 on # LPC Interface register "gen1_dec" = "0x000c06a1" register "gen2_dec" = "0x000c0081" chip ec/starlabs/merlin # Port pair 4Eh/4Fh device pnp 4e.00 on end # IO Interface device pnp 4e.04 off end # System Wake-Up device pnp 4e.05 off end # Mouse device pnp 4e.06 on # Keyboard io 0x60 = 0x0060 io 0x62 = 0x0064 irq 0x70 = 1 end device pnp 4e.0f off end # Shared Memory/Flash Interface device pnp 4e.11 off end # Power Management Channel 1 device pnp 4e.12 off end # Power Management Channel 2 device pnp 4e.17 off end # Power Management Channel 3 device pnp 4e.1d off end # Extended Shared Memory (ESHM) device pnp 4e.1e off end # Power Management Channel 4 end end device pci 1f.1 off end # SMBus end chip drivers/crb device mmio 0xfed40000 on end end end