# SPDX-License-Identifier: GPL-2.0-or-later chip northbridge/intel/sandybridge device cpu_cluster 0 on chip cpu/intel/model_206ax register "acpi_c1" = "1" register "acpi_c2" = "3" register "acpi_c3" = "5" device lapic 0 on end device lapic 0xacac off end end end device domain 0 on chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH register "c2_latency" = "0x0065" register "gen1_dec" = "0x000c0291" register "gen2_dec" = "0x000c0a01" register "pcie_port_coalesce" = "1" register "sata_interface_speed_support" = "0x3" register "sata_port_map" = "0x33" register "spi.opprefixes" = "{ 0x50, 0x06 }" register "spi.ops" = "{{0x01, WRITE_NO_ADDR}, {0x02, WRITE_WITH_ADDR}, {0x03, READ_WITH_ADDR}, {0x05, READ_NO_ADDR}, {0x20, WRITE_WITH_ADDR}, {0x9f, READ_NO_ADDR}, {0xad, WRITE_NO_ADDR}, {0x04, WRITE_NO_ADDR}}" device pci 16.0 on # Management Engine Interface 1 subsystemid 0x174b 0x1007 end device pci 16.1 off end # Management Engine Interface 2 device pci 16.2 off end # Management Engine IDE-R device pci 16.3 off end # Management Engine KT device pci 19.0 off end # Intel Gigabit Ethernet device pci 1a.0 on # USB2 EHCI #2 subsystemid 0x174b 0x1007 end device pci 1b.0 on # HD Audio Controller subsystemid 0x8086 0x1c20 end device pci 1c.0 on # PCIe Port #1 subsystemid 0x174b 0x1007 end device pci 1c.1 off end # PCIe Port #2 device pci 1c.2 off end # PCIe Port #3 device pci 1c.3 off end # PCIe Port #4 device pci 1c.4 on # PCIe Port #5 subsystemid 0x174b 0x1007 end device pci 1c.5 on # PCIe Port #6 subsystemid 0x174b 0x1007 end device pci 1c.6 off end # PCIe Port #7 device pci 1c.7 off end # PCIe Port #8 device pci 1d.0 on # USB2 EHCI #1 subsystemid 0x174b 0x1007 end device pci 1e.0 off end # PCI bridge device pci 1f.0 on # LPC bridge subsystemid 0x174b 0x1007 chip superio/fintek/f71808a register "multi_function_register_0" = "0x00" register "multi_function_register_1" = "0xc4" register "multi_function_register_2" = "0x21" register "multi_function_register_3" = "0x2f" register "multi_function_register_4" = "0x5c" register "hwm_peci_tsi_ctrl" = "0x02" # PECI enabled, 1.23 V register "hwm_tcc_temp" = "0x66" # TCC temperature = 102 °C register "hwm_fan1_seg1_speed" = "0xff" # Fan 1 segment 1 = 100% register "hwm_fan1_seg2_speed" = "0xdb" # Fan 1 segment 2 = 86% register "hwm_fan1_seg3_speed" = "0xbc" # Fan 1 segment 3 = 74% register "hwm_fan1_seg4_speed" = "0x9e" # Fan 1 segment 4 = 62% register "hwm_fan1_seg5_speed" = "0x7f" # Fan 1 segment 5 = 50% register "hwm_fan1_temp_src" = "0x18" # Fan 1 source = PECI register "hwm_fan2_seg1_speed" = "0xff" # Fan 2 segment 1 = 100% register "hwm_fan2_seg2_speed" = "0xdb" # Fan 2 segment 2 = 86% register "hwm_fan2_seg3_speed" = "0xbc" # Fan 2 segment 3 = 74% register "hwm_fan2_seg4_speed" = "0x9e" # Fan 2 segment 4 = 62% register "hwm_fan2_seg5_speed" = "0x7f" # Fan 2 segment 5 = 50% register "hwm_fan2_temp_src" = "0x1e" # Fan 2 source = temperature 2 device pnp 4e.1 off end # Serial Port 1 device pnp 4e.4 on # Hardware monitor io 0x60 = 0x295 irq 0x70 = 0 end device pnp 4e.5 off end # Keyboard device pnp 4e.6 on # GPIO irq 0xc5 = 0x1f end device pnp 4e.7 on # WDT io 0x60 = 0xa00 end device pnp 4e.8 off end # CIR device pnp 4e.a on # PME, ACPI, EUP irq 0xe0 = 0x90 irq 0xf8 = 0x00 irq 0xf9 = 0x09 irq 0xfa = 0x00 end end end device pci 1f.2 on # SATA Controller 1 subsystemid 0x174b 0x1007 end device pci 1f.3 on # SMBus subsystemid 0x174b 0x1007 end device pci 1f.5 off end # SATA Controller 2 device pci 1f.6 off end # Thermal end device pci 00.0 on # Host bridge subsystemid 0x174b 0x1007 end device pci 01.0 on # PCIe Bridge for discrete graphics subsystemid 0x174b 0x1007 end device pci 02.0 on # Internal graphics VGA controller subsystemid 0x8086 0x2010 end end end