chip northbridge/intel/sandybridge # Enable DisplayPort 1 Hotplug with 6ms pulse register "gpu_dp_d_hotplug" = "0x06" # Enable DisplayPort 0 Hotplug with 6ms pulse register "gpu_dp_c_hotplug" = "0x06" # Enable DVI Hotplug with 6ms pulse register "gpu_dp_b_hotplug" = "0x06" register "max_mem_clock_mhz" = "666" register "usb_port_config" = "{ { 1, 0, 0x0080 }, { 1, 1, 0x0040 }, { 1, 0, 0x0040 }, { 1, 0, 0x0040 }, { 1, 2, 0x0080 }, { 0, 0, 0x0000 }, { 0, 0, 0x0000 }, { 0, 0, 0x0000 }, { 1, 4, 0x0040 }, { 1, 4, 0x0040 }, { 1, 4, 0x0040 }, { 0, 4, 0x0000 }, { 1, 6, 0x0040 }, { 1, 5, 0x0040 }, }" chip cpu/intel/model_206ax device cpu_cluster 0 on end register "acpi_c1" = "CPU_ACPI_C3" register "acpi_c2" = "CPU_ACPI_C6" end device domain 0 on subsystemid 0x1ae0 0xc000 inherit device ref host_bridge on end # host bridge device ref igd on end # vga controller chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH # GPI routing # 0 No effect (default) # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) # 2 SCI (if corresponding GPIO_EN bit is also set) register "gpi1_routing" = "0" register "gpi14_routing" = "2" register "sata_port_map" = "0x3" register "gen1_dec" = "0x00fc1601" # SuperIO range is 0x700-0x73f register "gen2_dec" = "0x003c0701" device ref mei1 on end # Management Engine Interface 1 device ref mei2 off end # Management Engine Interface 2 device ref me_ide_r off end # Management Engine IDE-R device ref me_kt off end # Management Engine KT device ref gbe off end # Intel Gigabit Ethernet device ref ehci2 on end # USB2 EHCI #2 device ref hda on end # High Definition Audio device ref pcie_rp1 on end # PCIe Port #1 (WLAN) device ref pcie_rp2 off end # PCIe Port #2 device ref pcie_rp3 on end # PCIe Port #3 (Debug) device ref pcie_rp4 on end # PCIe Port #4 (LAN) device ref pcie_rp5 off end # PCIe Port #5 device ref pcie_rp6 off end # PCIe Port #6 device ref pcie_rp7 off end # PCIe Port #7 device ref pcie_rp8 off end # PCIe Port #8 device ref ehci1 on end # USB2 EHCI #1 device ref pci_bridge off end # PCI bridge device ref lpc on # LPC bridge chip superio/ite/it8772f # Enable GPIO10 as USBPWRON12# # Enable GPIO12 as USBPWRON13# register "gpio_set1" = "0x05" # Enable GPIO22 as SIO_WAEKSCI# register "gpio_set2" = "0x04" # Enable GPIO32 as SIO_EXTSMI# register "gpio_set3" = "0x04" # Enable GPIO45 as LED_POWER# register "gpio_set4" = "0x20" # Enable GPIO51 as USBPWRON8# # Enable GPIO52 as USBPWRON1# register "gpio_set5" = "0x06" # Skip keyboard init register "skip_keyboard" = "true" # Enable PECI on TMPIN3 register "peci_tmpin" = "3" # Enable FAN3 register "fan3_enable" = "true" device pnp 2e.0 off end # FDC device pnp 2e.1 on # Serial Port 1 io 0x60 = 0x2f8 irq 0x70 = 4 end device pnp 2e.4 on # Environment Controller io 0x60 = 0x700 io 0x62 = 0x710 end device pnp 2e.7 on # GPIO io 0x60 = 0x720 io 0x62 = 0x730 end device pnp 2e.5 on io 0x60 = 0x60 io 0x62 = 0x64 irq 0x70 = 1 end # Keyboard device pnp 2e.6 on irq 0x70 = 12 end # Mouse device pnp 2e.a off end # IR end chip drivers/pc80/tpm device pnp 0c31.0 on end end end device ref sata1 on end # SATA Controller 1 device ref smbus on end # SMBus device ref sata2 off end # SATA Controller 2 device ref thermal on end # Thermal end end end