/* * This file is part of the coreboot project. * * Copyright (C) 2012 secunet Security Networks AG * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include <stdint.h> #include <stdlib.h> #include <arch/io.h> #include <device/device.h> #include <console/console.h> #include <drivers/intel/gma/int15.h> #include <pc80/keyboard.h> #include <ec/acpi/ec.h> static void ec_setup(void) { /* Thermal limits? Values are from ectool's ram dump. */ ec_write(0xd1, 0x57); /* CPUH */ ec_write(0xd2, 0xc9); /* CPUL */ ec_write(0xd4, 0x64); /* SYSH */ ec_write(0xd5, 0xc9); /* SYSL */ send_ec_command(0x04); /* Set_SMI_Enable */ send_ec_command(0xab); /* Set_ACPI_Disable */ send_ec_command(0xac); /* Clr_SYS_Flag? well, why not? */ send_ec_command(0xad); /* Set_Thml_Value */ } static void mainboard_enable(device_t dev) { ec_setup(); /* LCD panel type is SIO GPIO40-43. It's controlled by a DIP switch but was always set to 4 while only values of 5 and 6 worked. */ install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_CENTERING, GMA_INT15_BOOT_DISPLAY_DEFAULT, (inb(0x60f) & 0x0f) + 1); /* We have no driver for the embedded controller since the firmware does most of the job. Hence, initialize keyboards here. */ pc_keyboard_init(NO_AUX_DEVICE); } struct chip_operations mainboard_ops = { .enable_dev = mainboard_enable, };