chip soc/intel/cannonlake

	# Enable Enhanced Intel SpeedStep
	register "eist_enable" = "1"

# FSP Memory (soc/intel/cannonlake/romstage/fsp_params.c)
	register "SaGv" = "SaGv_Enabled"

# FSP Silicon (soc/intel/cannonlake/fsp_params.c)

	# Acoustic Noise
	register "AcousticNoiseMitigation" = "1"

	register "FastPkgCRampDisableIa" = "1"
	register "FastPkgCRampDisableGt" = "1"
	register "FastPkgCRampDisableSa" = "1"
	register "FastPkgCRampDisableFivr" = "1"

	register "SlowSlewRateForIa" = "3"	# fast/16
	register "SlowSlewRateForGt" = "3"	# fast/16
	register "SlowSlewRateForSa" = "3"	# fast/16
	register "SlowSlewRateForFivr" = "3"	# fast/16

	# Power
	register "PchPmSlpS3MinAssert" = "3"	# 50ms
	register "PchPmSlpS4MinAssert" = "1"	# 1s
	register "PchPmSlpSusMinAssert" = "2"	# 500ms
	register "PchPmSlpAMinAssert" = "4"	# 2s

	# Thermal
	register "tcc_offset" = "10"

# PM Util (soc/intel/cannonlake/pmutil.c)
	# GPE configuration
	# Note that GPE events called out in ASL code rely on this
	# route. i.e. If this route changes then the affected GPE
	# offset bits also need to be changed.
	# sudo devmem2 0xfe001920 (pmc_bar + GPIO_GPE_CFG)
	register "gpe0_dw0" = "PMC_GPP_C"
	register "gpe0_dw1" = "PMC_GPP_D"
	register "gpe0_dw2" = "PMC_GPP_E"

# Actual device tree
	device cpu_cluster 0 on end

	device domain 0 on
		device ref igpu		on end
		device ref dptf		on
			register "Device4Enable" = "1"
		end
		device ref thermal	on end
		device ref xhci		on end
		device ref sata		on end
		device ref hda		on
			register "PchHdaAudioLinkHda" = "1"
		end
		device ref smbus	on end
		device ref fast_spi	on end
	end
end