## ## Config file for the Motorola Sandpoint III development system. ## Note that this has only been tested with the Altimus 7410 PMC. ## uses CONFIG_SANDPOINT_ALTIMUS uses CONFIG_SANDPOINT_TALUS uses CONFIG_SANDPOINT_UNITY uses CONFIG_SANDPOINT_VALIS uses CONFIG_SANDPOINT_GYRUS uses PCIC0_CFGADDR uses PCIC0_CFGDATA uses PNP_CFGADDR uses PNP_CFGDATA ## ## Set PCI registers ## default PCIC0_CFGADDR=0xfec00000 default PCIC0_CFGDATA=0xfee00000 default PNP_CFGADDR=0x15c default PNP_CFGDATA=0x15d ## ## Early board initialization, called from ppc_main() ## initobject init.c ## ## Set our ARCH ## arch ppc end if CONFIG_SANDPOINT_ALTIMUS pmc altimus/mpc7410 end # pmc altimus/mpc7400 end # pmc altimus/mpc75x end end if CONFIG_SANDPOINT_TALUS pmc talus/mpc74x end pmc talus/mpc603 end end if CONFIG_SANDPOINT_UNITY pmc unity/mpc824x end end if CONFIG_SANDPOINT_VALIS pmc valis/mpc745x end end if CONFIG_SANDPOINT_GYRUS pmc gyrus/mpc744x end end ## ## Include the secondary Configuration files ## southbridge winbond/w83c553 end superio NSC/pc97307 register "com1" = "{1}" register "lpt" = "{0}" register "port" = "TTYS0_BASE" end ## ## Build the objects we have code for in this directory. ## dir nvram dir flash addaction linuxbios.a "$(CROSS_COMPILE)ranlib linuxbios.a" makedefine CFLAGS += -g