chip northbridge/amd/lx
	device domain 0 on
		device pci 1.0 on end		# Northbridge
		device pci 1.1 on end		# Graphics
		device pci 1.2 on end		# AES
		chip southbridge/amd/cs5536		# Southbridge
			# IRQ 12 and 1 unmasked, keyboard and mouse IRQs. OK
			# SIRQ Mode = Active(Quiet) mode. Save power...
			# Invert mask = IRQ 12 and 1 are active high. Keyboard and mouse,
			# UARTs, etc IRQs. OK
			register "lpc_serirq_enable"			= "0x000012DA"	# 00010010 11011010
			register "lpc_serirq_polarity"			= "0x0000ED25"	# inverse of above
			register "lpc_serirq_mode"			= "1"
			register "enable_gpio_int_route"		= "0x0D0C0700"
			register "enable_ide_nand_flash"		= "0"	# 0:ide mode, 1:flash
			register "enable_USBP4_device"			= "0"	# 0: host, 1:device
			register "enable_USBP4_overcurrent"		= "0" #0:off, xxxx:overcurrent setting CS5536 Data Book (pages 380-381)
			register "com1_enable"				= "0"
			register "com1_address"				= "0x3E8"
			register "com1_irq"				= "6"
			register "com2_enable"				= "0"
			register "com2_address"				= "0x2E8"
			register "com2_irq"				= "6"
			register "unwanted_vpci[0]"			= "0"	# End of list has a zero
			device pci 8.0 on end		# Slot4
			device pci 9.0 on end		# Slot3
			device pci a.0 on end		# Slot2
			device pci b.0 on end		# Slot1
			device pci c.0 on end		# IT8888
			device pci e.0 on end		# Ethernet
			device pci f.0 on			# ISA bridge
				chip superio/ite/it8712f
					device pnp 2e.0 off		# Floppy
						io 0x60 = 0x3f0
						irq 0x70 = 6
						drq 0x74 = 2
					end
					device pnp 2e.1 on		# Com1
						io 0x60 = 0x3f8
						irq 0x70 = 4
					end
					device pnp 2e.2 on		# Com2
						io 0x60 = 0x2f8
						irq 0x70 = 3
					end
					device pnp 2e.3 on		# Parallel port
						io 0x60 = 0x378
						irq 0x70 = 7
					end
					device pnp 2e.4 on		# EC
						io 0x60 = 0x290 # EC
						io 0x62 = 0x298 # PME
						irq 0x70 = 9
					end
					device pnp 2e.5 on		# PS/2 keyboard
						io 0x60 = 0x60
						io 0x62 = 0x64
						irq 0x70 = 1
					end
					device pnp 2e.6 on		# PS/2 mouse
						irq 0x70 = 12
					end
					device pnp 2e.7 on		# GPIO
						io 0x62 = 0x1220 # Simple I/O
						# io 0x64 = 0x1228 # SPI
					end
					device pnp 2e.8 off		# MIDI
						io 0x60 = 0x300
						irq 0x70 = 9
					end
					device pnp 2e.9 off		# Game port
						io 0x60 = 0x220
					end
					device pnp 2e.a off end	# CIR
				end
			end
			device pci f.2 on end		# IDE controller
			device pci f.3 on end		# Audio
			device pci f.4 on end		# OHCI
			device pci f.5 on end		# EHCI
		end
	end
	# APIC cluster is late CPU init.
	device cpu_cluster 0 on
		chip cpu/amd/geode_lx
			device lapic 0 on end
		end
	end
end