chip northbridge/intel/gm45
	# IGD Displays
	register "gfx" = "GMA_STATIC_DISPLAYS(1)"

	register "gpu_panel_power_up_delay" = "250"		# T1+T2: 25ms
	register "gpu_panel_power_down_delay" = "250"		# T3:    25ms
	register "gpu_panel_power_backlight_on_delay" = "2500"	# T5:   250ms
	register "gpu_panel_power_backlight_off_delay" = "2500"	# Tx:   250ms
	register "gpu_panel_power_cycle_delay" = "3"		# T4:   200ms

	device cpu_cluster 0 on
		chip cpu/intel/socket_BGA956
			device lapic 0 on end
		end
		chip cpu/intel/model_1067x
			# Magic APIC ID to locate this chip
			device lapic 0xACAC off end

			# Enable Super LFM
			register "slfm" = "1"

			# Enable C5, C6
			register "c5" = "1"
			register "c6" = "1"
		end
	end

	register "pci_mmio_size" = "2048"

	device domain 0 on
		device pci 00.0 on
			subsystemid 0x17aa 0x20e0
		end # host bridge
		device pci 02.0 on # VGA
			subsystemid 0x17aa 0x20e4
		end
		device pci 02.1 on
			subsystemid 0x17aa 0x20e4
		end # Display
		device pci 03.0 on
			subsystemid 0x17aa 0x20e6
		end # ME
		device pci 03.1 off end # ME
		device pci 03.2 off end # ME
		device pci 03.3 off end # ME
		chip southbridge/intel/i82801ix
			register "pirqa_routing" = "0x0b"
			register "pirqb_routing" = "0x0b"
			register "pirqc_routing" = "0x0b"
			register "pirqd_routing" = "0x0b"
			register "pirqe_routing" = "0x80"
			register "pirqf_routing" = "0x80"
			register "pirqg_routing" = "0x80"
			register "pirqh_routing" = "0x80"

			register "gpi8_routing"  = "2"
			register "gpe0_en" = "0x01000000"
			register "gpi1_routing"  = "2"

			# Set AHCI mode, enable ports 1 and 2.
			register "sata_port_map"		= "0x03"
			register "sata_clock_request"		= "0"
			register "sata_traffic_monitor"		= "0"

			# Set c-state support
			register "c4onc3_enable"		= "1"
			register "c5_enable"			= "1"
			register "c6_enable"			= "1"

			# Set thermal throttling to 75%.
			register "throttle_duty"		= "THTL_75_0"

			register "gen1_dec" = "0x007c1601"
			register "gen2_dec" = "0x000c15e1"
			register "gen3_dec" = "0x001c1681"

			device pci 19.0 on end # LAN
			device pci 1a.0 on # UHCI
				subsystemid 0x17aa 0x20f0
			end
			device pci 1a.1 on # UHCI
				subsystemid 0x17aa 0x20f0
			end
			device pci 1a.2 on # UHCI
				subsystemid 0x17aa 0x20f0
			end
			device pci 1a.7 on # EHCI
				subsystemid 0x17aa 0x20f1
			end
			device pci 1b.0 on # HD Audio
				subsystemid 0x17aa 0x20f2
			end
			device pci 1c.0 on # PCIe Port #1
				subsystemid 0x17aa 0x20f3 # WWAN
			end
			device pci 1c.1 on
				subsystemid 0x17aa 0x20f3 # WLAN
			end # PCIe Port #2
			device pci 1c.2 on
				subsystemid 0x17aa 0x20f3 # UWB
			end # PCIe Port #3
			device pci 1c.3 off end # PCIe Port #4
			device pci 1c.4 off end # PCIe Port #5
			device pci 1c.5 off end # PCIe Port #6
			device pci 1d.0 on # UHCI
				subsystemid 0x17aa 0x20f0
			end
			device pci 1d.1 on # UHCI
				subsystemid 0x17aa 0x20f0
			end
			device pci 1d.2 on # UHCI
				subsystemid 0x17aa 0x20f0
			end
			device pci 1d.7 on # EHCI
				subsystemid 0x17aa 0x20f1
			end
			device pci 1e.0 on # PCI
				subsystemid 0x17aa 0x20f4
			end
			device pci 1f.0 on # LPC bridge
				subsystemid 0x17aa 0x20f5

				chip ec/lenovo/pmh7
					device pnp ff.1 on end # dummy
					register "backlight_enable" = "0x01"
				end

				chip ec/lenovo/h8
					device pnp ff.2 on # dummy
						io 0x60 = 0x62
						io 0x62 = 0x66
						io 0x64 = 0x1600
						io 0x66 = 0x1604
					end

					register "config0" = "0xa6"
					register "config1" = "0x04"
					register "config2" = "0xa0"
					register "config3" = "0x01"

					register "beepmask0" = "0xfe"
					register "beepmask1" = "0x96"
					register "has_power_management_beeps" = "1"
					register "has_uwb" = "1"

					register "event2_enable" = "0xff"
					register "event3_enable" = "0xff"
					register "event4_enable" = "0xf4"
					register "event5_enable" = "0x3c"
					register "event6_enable" = "0x80"
					register "event7_enable" = "0x01"
					register "event8_enable" = "0x01"
					register "event9_enable" = "0xff"
					register "eventa_enable" = "0xff"
					register "eventb_enable" = "0xff"
					register "eventc_enable" = "0xff"
					register "eventd_enable" = "0xff"

					register "has_bdc_detection" = "1"
					register "bdc_gpio_num" = "7"
					register "bdc_gpio_lvl" = "0"
				end
			end
			device pci 1f.2 on # SATA/IDE 1
				subsystemid 0x17aa 0x20f8
			end
			device pci 1f.3 on # SMBus
				subsystemid 0x17aa 0x20f9
				# eeprom, 8 virtual devices, same chip
				chip drivers/i2c/at24rf08c
					device i2c 54 on end
					device i2c 55 on end
					device i2c 56 on end
					device i2c 57 on end
					device i2c 5c on end
					device i2c 5d on end
					device i2c 5e on end
					device i2c 5f on end
				end
			end
			device pci 1f.5 off end # SATA/IDE 2
			device pci 1f.6 off end # Thermal
		end
	end
end